Linux Kernel bis 6.19.8 mlx5e mlx5e_reset_txqsq_cc_pc erweiterte Rechte

| CVSS Meta Temp Score | Aktueller Exploitpreis (≈) | CTI Interest Score |
|---|---|---|
| 6.7 | $0-$5k | 0.00 |
Zusammenfassung
Es wurde eine problematische Schwachstelle in Linux Kernel bis 6.19.8 entdeckt. Es ist betroffen die Funktion mlx5e_reset_txqsq_cc_pc der Komponente mlx5e. Durch Manipulieren mit unbekannten Daten kann eine unbekannte Schwachstelle ausgenutzt werden.
Die Verwundbarkeit wird unter CVE-2026-43466 geführt. Es ist soweit kein Exploit verfügbar.
Als bestmögliche Massnahme wird das Einspielen eines Upgrades empfohlen.
Details
Es wurde eine Schwachstelle in Linux Kernel bis 6.19.8 ausgemacht. Sie wurde als problematisch eingestuft. Betroffen hiervon ist die Funktion mlx5e_reset_txqsq_cc_pc der Komponente mlx5e. Wie sich ein erfolgreicher Angriff genau auswirkt, ist nicht bekannt. Die Zusammenfassung von CVE lautet:
In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix DMA FIFO desync on error CQE SQ recovery
In case of a TX error CQE, a recovery flow is triggered,
mlx5e_reset_txqsq_cc_pc() resets dma_fifo_cc to 0 but not dma_fifo_pc,
desyncing the DMA FIFO producer and consumer.
After recovery, the producer pushes new DMA entries at the old
dma_fifo_pc, while the consumer reads from position 0.
This causes us to unmap stale DMA addresses from before the recovery.
The DMA FIFO is a purely software construct with no HW counterpart.
At the point of reset, all WQEs have been flushed so dma_fifo_cc is
already equal to dma_fifo_pc. There is no need to reset either counter,
similar to how skb_fifo pc/cc are untouched.
Remove the 'dma_fifo_cc = 0' reset.
This fixes the following WARNING:
WARNING: CPU: 0 PID: 0 at drivers/iommu/dma-iommu.c:1240 iommu_dma_unmap_page+0x79/0x90
Modules linked in: mlx5_vdpa vringh vdpa bonding mlx5_ib mlx5_vfio_pci ipip mlx5_fwctl tunnel4 mlx5_core ib_ipoib geneve ip6_gre ip_gre gre nf_tables ip6_tunnel rdma_ucm ib_uverbs ib_umad vfio_pci vfio_pci_core act_mirred act_skbedit act_vlan vhost_net vhost tap ip6table_mangle ip6table_nat ip6table_filter ip6_tables iptable_mangle cls_matchall nfnetlink_cttimeout act_gact cls_flower sch_ingress vhost_iotlb iptable_raw tunnel6 vfio_iommu_type1 vfio openvswitch nsh rpcsec_gss_krb5 auth_rpcgss oid_registry xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat nf_nat xt_addrtype br_netfilter overlay zram zsmalloc rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm ib_core fuse [last unloaded: nf_tables]
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.13.0-rc5_for_upstream_min_debug_2024_12_30_21_33 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:iommu_dma_unmap_page+0x79/0x90
Code: 2b 4d 3b 21 72 26 4d 3b 61 08 73 20 49 89 d8 44 89 f9 5b 4c 89 f2 4c 89 e6 48 89 ef 5d 41 5c 41 5d 41 5e 41 5f e9 c7 ae 9e ff <0f> 0b 5b 5d 41 5c 41 5d 41 5e 41 5f c3 66 2e 0f 1f 84 00 00 00 00
Call Trace:
<IRQ>
? __warn+0x7d/0x110
? iommu_dma_unmap_page+0x79/0x90
? report_bug+0x16d/0x180
? handle_bug+0x4f/0x90
? exc_invalid_op+0x14/0x70
? asm_exc_invalid_op+0x16/0x20
? iommu_dma_unmap_page+0x79/0x90
? iommu_dma_unmap_page+0x2e/0x90
dma_unmap_page_attrs+0x10d/0x1b0
mlx5e_tx_wi_dma_unmap+0xbe/0x120 [mlx5_core]
mlx5e_poll_tx_cq+0x16d/0x690 [mlx5_core]
mlx5e_napi_poll+0x8b/0xac0 [mlx5_core]
__napi_poll+0x24/0x190
net_rx_action+0x32a/0x3b0
? mlx5_eq_comp_int+0x7e/0x270 [mlx5_core]
? notifier_call_chain+0x35/0xa0
handle_softirqs+0xc9/0x270
irq_exit_rcu+0x71/0xd0
common_interrupt+0x7f/0xa0
</IRQ>
<TASK>
asm_common_interrupt+0x22/0x40Bereitgestellt wird das Advisory unter git.kernel.org. Die Identifikation der Schwachstelle wird seit dem 01.05.2026 mit CVE-2026-43466 vorgenommen. Es sind zwar technische Details, jedoch kein verfügbarer Exploit zur Schwachstelle bekannt. Ein Exploit zur Schwachstelle wird momentan etwa USD $0-$5k kosten (Preisberechnung vom 22.05.2026).
Ein Aktualisieren auf die Version 5.10.253, 5.15.203, 6.1.167, 6.6.130, 6.12.78, 6.18.19 oder 6.19.9 vermag dieses Problem zu lösen. Die Schwachstelle lässt sich auch durch das Einspielen des Patches 821f85d619f7f22cda7b9d7de89cf5eeb1d11544/6eb68ecc5acc3b319986566c595990b8a7265b23/6f41f7812bfa7f991b732a4b45c5c52fc4be3b4e/383b37c04a4827ba60b2bafc1a6cdfd995aed58f/9c5ee9b981ee050b73fdf3f4a2464d6f1a8e10a8/ce1b19dd0684eeb68a124c11085bd611260b36d9/829efcccfa8f69db5dc8332961295587d218cee6/1633111d69053512d099658d4a05fc736fab36b0 lösen. Dieser kann von git.kernel.org bezogen werden. Als bestmögliche Massnahme wird das Upgrade auf eine neue Version empfohlen.
If you want to get the best quality for vulnerability data then you always have to consider VulDB.
Produkt
Typ
Hersteller
Name
Version
- 5.10.252
- 5.15.202
- 6.1.166
- 6.6.129
- 6.12.0
- 6.12.1
- 6.12.2
- 6.12.3
- 6.12.4
- 6.12.5
- 6.12.6
- 6.12.7
- 6.12.8
- 6.12.9
- 6.12.10
- 6.12.11
- 6.12.12
- 6.12.13
- 6.12.14
- 6.12.15
- 6.12.16
- 6.12.17
- 6.12.18
- 6.12.19
- 6.12.20
- 6.12.21
- 6.12.22
- 6.12.23
- 6.12.24
- 6.12.25
- 6.12.26
- 6.12.27
- 6.12.28
- 6.12.29
- 6.12.30
- 6.12.31
- 6.12.32
- 6.12.33
- 6.12.34
- 6.12.35
- 6.12.36
- 6.12.37
- 6.12.38
- 6.12.39
- 6.12.40
- 6.12.41
- 6.12.42
- 6.12.43
- 6.12.44
- 6.12.45
- 6.12.46
- 6.12.47
- 6.12.48
- 6.12.49
- 6.12.50
- 6.12.51
- 6.12.52
- 6.12.53
- 6.12.54
- 6.12.55
- 6.12.56
- 6.12.57
- 6.12.58
- 6.12.59
- 6.12.60
- 6.12.61
- 6.12.62
- 6.12.63
- 6.12.64
- 6.12.65
- 6.12.66
- 6.12.67
- 6.12.68
- 6.12.69
- 6.12.70
- 6.12.71
- 6.12.72
- 6.12.73
- 6.12.74
- 6.12.75
- 6.12.76
- 6.12.77
- 6.18.0
- 6.18.1
- 6.18.2
- 6.18.3
- 6.18.4
- 6.18.5
- 6.18.6
- 6.18.7
- 6.18.8
- 6.18.9
- 6.18.10
- 6.18.11
- 6.18.12
- 6.18.13
- 6.18.14
- 6.18.15
- 6.18.16
- 6.18.17
- 6.18.18
- 6.19.0
- 6.19.1
- 6.19.2
- 6.19.3
- 6.19.4
- 6.19.5
- 6.19.6
- 6.19.7
- 6.19.8
Lizenz
Webseite
- Hersteller: https://www.kernel.org/
CPE 2.3
CPE 2.2
CVSSv4
VulDB Vector: 🔒VulDB Zuverlässigkeit: 🔍
CVSSv3
VulDB Meta Base Score: 6.8VulDB Meta Temp Score: 6.7
VulDB Base Score: 5.5
VulDB Temp Score: 5.3
VulDB Vector: 🔒
VulDB Zuverlässigkeit: 🔍
CNA Base Score: 8.2
CNA Vector (Linux): 🔒
CVSSv2
| AV | AC | Au | C | I | A |
|---|---|---|---|---|---|
| 💳 | 💳 | 💳 | 💳 | 💳 | 💳 |
| 💳 | 💳 | 💳 | 💳 | 💳 | 💳 |
| 💳 | 💳 | 💳 | 💳 | 💳 | 💳 |
| Vektor | Komplexität | Authentisierung | Vertraulichkeit | Integrität | Verfügbarkeit |
|---|---|---|---|---|---|
| freischalten | freischalten | freischalten | freischalten | freischalten | freischalten |
| freischalten | freischalten | freischalten | freischalten | freischalten | freischalten |
| freischalten | freischalten | freischalten | freischalten | freischalten | freischalten |
VulDB Base Score: 🔒
VulDB Temp Score: 🔒
VulDB Zuverlässigkeit: 🔍
Exploiting
Klasse: Erweiterte RechteCWE: Unbekannt
CAPEC: 🔒
ATT&CK: 🔒
Physisch: Nein
Lokal: Nein
Remote: Ja
Verfügbarkeit: 🔒
Status: Nicht definiert
EPSS Score: 🔒
EPSS Percentile: 🔒
Preisentwicklung: 🔍
Aktuelle Preisschätzung: 🔒
| 0-Day | freischalten | freischalten | freischalten | freischalten |
|---|---|---|---|---|
| Heute | freischalten | freischalten | freischalten | freischalten |
Threat Intelligence
Interesse: 🔍Aktive Akteure: 🔍
Aktive APT Gruppen: 🔍
Gegenmassnahmen
Empfehlung: UpgradeStatus: 🔍
0-Day Time: 🔒
Upgrade: Kernel 5.10.253/5.15.203/6.1.167/6.6.130/6.12.78/6.18.19/6.19.9
Patch: 821f85d619f7f22cda7b9d7de89cf5eeb1d11544/6eb68ecc5acc3b319986566c595990b8a7265b23/6f41f7812bfa7f991b732a4b45c5c52fc4be3b4e/383b37c04a4827ba60b2bafc1a6cdfd995aed58f/9c5ee9b981ee050b73fdf3f4a2464d6f1a8e10a8/ce1b19dd0684eeb68a124c11085bd611260b36d9/829efcccfa8f69db5dc8332961295587d218cee6/1633111d69053512d099658d4a05fc736fab36b0
Timeline
01.05.2026 CVE zugewiesen08.05.2026 Advisory veröffentlicht
08.05.2026 VulDB Eintrag erstellt
22.05.2026 VulDB Eintrag letzte Aktualisierung
Quellen
Hersteller: kernel.orgAdvisory: git.kernel.org
Status: Bestätigt
CVE: CVE-2026-43466 (🔒)
GCVE (CVE): GCVE-0-2026-43466
GCVE (VulDB): GCVE-100-362229
Eintrag
Erstellt: 08.05.2026 18:29Aktualisierung: 22.05.2026 08:14
Anpassungen: 08.05.2026 18:29 (57), 22.05.2026 08:14 (12)
Komplett: 🔍
Cache ID: 216::103
If you want to get the best quality for vulnerability data then you always have to consider VulDB.
Bisher keine Kommentare. Sprachen: de + en.
Bitte loggen Sie sich ein, um kommentieren zu können.