Linux Kernel bis 6.6.142/6.12.92/6.18.34/7.0.11 Zs serial_base_ctrl_add Denial of Service

CVSS Meta Temp ScoreAktueller Exploitpreis (≈)CTI Interest Score
5.3$0-$5k2.21-

Zusammenfassunginfo

Eine kritische Schwachstelle wurde in Linux Kernel bis 6.6.142/6.12.92/6.18.34/7.0.11 entdeckt. Betroffen davon ist die Funktion serial_base_ctrl_add der Komponente Zs. Die Veränderung resultiert in Denial of Service. Eine eindeutige Identifikation der Schwachstelle wird mit CVE-2026-63876 vorgenommen. Der Angriff muss lokal angegangen werden. Es gibt keinen verfügbaren Exploit.

Detailsinfo

In Linux Kernel bis 6.6.142/6.12.92/6.18.34/7.0.11 wurde eine kritische Schwachstelle ausgemacht. Dabei geht es um die Funktion serial_base_ctrl_add der Komponente Zs. Dank Manipulation mit einer unbekannten Eingabe kann eine Denial of Service-Schwachstelle ausgenutzt werden. CWE definiert das Problem als CWE-476. Auswirkungen hat dies auf die Verfügbarkeit. Die Zusammenfassung von CVE lautet:

In the Linux kernel, the following vulnerability has been resolved: serial: zs: Convert to use a platform device Prevent a crash from happening as the first serial port is initialised: Console: switching to mono frame buffer device 160x64 fb0: PMAG-AA frame buffer device at tc0 DECstation Z85C30 serial driver version 0.10 CPU 0 Unable to handle kernel paging request at virtual address 0000002c, epc == 803ab00c, ra == 803aafe0 Oops[#1]: CPU: 0 PID: 1 Comm: swapper Not tainted 6.4.0-rc3-00031-g84a9582fd203-dirty #57 $ 0 : 00000000 10012c00 803aaeb0 00000000 $ 4 : 80e12f60 80e12f50 80e12f58 81000030 $ 8 : 00000000 805ff37c 00000000 33433538 $12 : 65732030 00000006 80c2915d 6c616972 $16 : 80e12f00 807b7630 00000000 00000000 $20 : 00000004 00000348 000001a0 807623b8 $24 : 00000018 00000000 $28 : 80c24000 80c25d60 8078b148 803aafe0 Hi : 00000000 Lo : 00000000 epc : 803ab00c serial_base_ctrl_add+0x78/0xf4 ra : 803aafe0 serial_base_ctrl_add+0x4c/0xf4 Status: 10012c03 KERNEL EXL IE Cause : 00000008 (ExcCode 02) BadVA : 0000002c PrId : 00000440 (R4400SC) Modules linked in: Process swapper (pid: 1, threadinfo=(ptrval), task=(ptrval), tls=00000000) Stack : 80760000 00000cc0 00400044 00400040 803aa02c 80d61ab8 00000000 807b7630 80760000 807623b8 807b7628 803aa644 80386998 00000000 80e17780 80220f68 80e17780 80d61ab8 80c17d80 80e17780 80e17780 8063c798 80e17780 80383fa0 00000010 80e17780 00000000 80386998 807a0000 00000000 00400040 8038f848 807623b8 80d61ab8 00000004 80e17780 00000000 803a68e4 80c25e2c 803bb884 ... Call Trace: [<803ab00c>] serial_base_ctrl_add+0x78/0xf4 [<803aa644>] serial_core_register_port+0x174/0x69c [<8077e9ac>] zs_init+0xc8/0xfc [<800404d4>] do_one_initcall+0x40/0x2ac [<8076cecc>] kernel_init_freeable+0x1e4/0x270 [<80605bec>] kernel_init+0x20/0x108 [<800431e8>] ret_from_kernel_thread+0x14/0x1c Code: 2442aeb0 ae120024 ae0200d0 <8c67002c> 50e00001 8c670000 3c06806e 3c05806e afb30010 ---[ end trace 0000000000000000 ]--- (report at the offending commit) -- where a pointer is dereferenced that has been derived from a null pointer to the port's parent device. Since no device is available with legacy probing and it's not anymore a preferable way to discover devices anyway, switch the driver to using a platform device and use it as the port's parent device. Update resource handling accordingly and only request the actual span of addresses used within the slot, which will have had its resource already requested by generic platform device code. Use platform_driver_probe() not just because SCC devices are fixed with solder on board and not straightforward to remove, but foremost because the associated TTY's major device number is the same as used by the dz driver and the first driver to claim it will prevent the other one from using it. Either one DZ device or some SCC devices will be present in a given system but never both at a time, and therefore we want the major device number to be claimed by the first driver to actually successfully bind to its device and platform_driver_probe() is a way to fulfil that. An unfortunate consequence of the switch to a platform device is we now hand the console over from the bootconsole much later in the bootstrap. The firmware console handler appears good enough though to work so late and in particular with interrupts enabled. Since there is one way only remaining to reach zs_reset() now, remove the port initialisation marker as no longer needed and go through the channel reset unconditionally.

Bereitgestellt wird das Advisory unter git.kernel.org. Die Verwundbarkeit wird seit dem 19.07.2026 als CVE-2026-63876 geführt. Das Ausnutzen gilt als leicht. Der Angriff muss lokal angegangen werden. Technische Details sind bekannt, ein verfügbarer Exploit hingegen nicht.

Ein Aktualisieren auf die Version 6.6.143, 6.12.93, 6.18.35 oder 7.0.12 vermag dieses Problem zu lösen.

If you want to get the best quality for vulnerability data then you always have to consider VulDB.

Produktinfo

Typ

Hersteller

Name

Version

Lizenz

Webseite

CPE 2.3info

CPE 2.2info

CVSSv4info

VulDB Vector: 🔒
VulDB Zuverlässigkeit: 🔍

CVSSv3info

VulDB Meta Base Score: 5.5
VulDB Meta Temp Score: 5.3

VulDB Base Score: 5.5
VulDB Temp Score: 5.3
VulDB Vector: 🔒
VulDB Zuverlässigkeit: 🔍

CVSSv2info

AVACAuCIA
💳💳💳💳💳💳
💳💳💳💳💳💳
💳💳💳💳💳💳
VektorKomplexitätAuthentisierungVertraulichkeitIntegritätVerfügbarkeit
freischaltenfreischaltenfreischaltenfreischaltenfreischaltenfreischalten
freischaltenfreischaltenfreischaltenfreischaltenfreischaltenfreischalten
freischaltenfreischaltenfreischaltenfreischaltenfreischaltenfreischalten

VulDB Base Score: 🔒
VulDB Temp Score: 🔒
VulDB Zuverlässigkeit: 🔍

Exploitinginfo

Klasse: Denial of Service
CWE: CWE-476 / CWE-404
CAPEC: 🔒
ATT&CK: 🔒

Physisch: Teilweise
Lokal: Ja
Remote: Nein

Verfügbarkeit: 🔒
Status: Nicht definiert
Preisentwicklung: 🔍
Aktuelle Preisschätzung: 🔒

0-Dayfreischaltenfreischaltenfreischaltenfreischalten
Heutefreischaltenfreischaltenfreischaltenfreischalten

Threat Intelligenceinfo

Interesse: 🔍
Aktive Akteure: 🔍
Aktive APT Gruppen: 🔍

Gegenmassnahmeninfo

Empfehlung: keine Massnahme bekannt
Status: 🔍

0-Day Time: 🔒

Upgrade: Kernel 6.6.143/6.12.93/6.18.35/7.0.12

Timelineinfo

19.07.2026 Advisory veröffentlicht
19.07.2026 +0 Tage CVE zugewiesen
19.07.2026 +0 Tage VulDB Eintrag erstellt
19.07.2026 +0 Tage VulDB Eintrag letzte Aktualisierung

Quelleninfo

Hersteller: kernel.org

Advisory: git.kernel.org
Status: Bestätigt

CVE: CVE-2026-63876 (🔒)
GCVE (CVE): GCVE-0-2026-63876
GCVE (VulDB): GCVE-100-380293

Eintraginfo

Erstellt: 19.07.2026 19:16
Anpassungen: 19.07.2026 19:16 (55)
Komplett: 🔍
Cache ID: 216::103

If you want to get the best quality for vulnerability data then you always have to consider VulDB.

Diskussion

Bisher keine Kommentare. Sprachen: de + en.

Bitte loggen Sie sich ein, um kommentieren zu können.

Want to know what is going to be exploited?

We predict KEV entries!