Linux Kernel bis 7.1.2 MIPS/DEC Pufferüberlauf

CVSS Meta Temp ScoreAktueller Exploitpreis (≈)CTI Interest Score
8.4$0-$5k3.31-

Zusammenfassunginfo

Es wurde eine als sehr kritisch klassifizierte Schwachstelle in Linux Kernel bis 7.1.2 entdeckt. Betroffen hiervon ist ein unbekannter Ablauf der Komponente MIPS/DEC. Die Manipulation führt zu Pufferüberlauf. Die Verwundbarkeit wird mit der eindeutigen Identifikation CVE-2026-64252 gehandelt. Der Angriff muss lokal durchgeführt werden. Es ist soweit kein Exploit verfügbar.

Detailsinfo

Eine sehr kritische Schwachstelle wurde in Linux Kernel bis 7.1.2 ausgemacht. Hierbei geht es um unbekannter Programmcode der Komponente MIPS/DEC. Durch das Manipulieren mit einer unbekannten Eingabe kann eine Pufferüberlauf-Schwachstelle ausgenutzt werden. Klassifiziert wurde die Schwachstelle durch CWE als CWE-120. Dies wirkt sich aus auf Vertraulichkeit, Integrität und Verfügbarkeit. CVE fasst zusammen:

In the Linux kernel, the following vulnerability has been resolved: MIPS: DEC: Prevent initial console buffer from landing in XKPHYS In 64-bit configurations calling the initial console output handler from a kernel thread other than the initial one will result in a situation where the stack has been placed in the XKPHYS 64-bit memory segment and consequently so has been the buffer allocated there that is used as the argument corresponding to the `%s' output conversion specifier for the firmware's printf() entry point. This 64-bit address will then be truncated by 32-bit firmware, resulting in an attempt to access the wrong memory location, which in turn will cause all kinds of unpredictable behaviour, such as a kernel crash: Console: colour dummy device 160x64 Calibrating delay loop... 49.36 BogoMIPS (lpj=192512) pid_max: default: 32768 minimum: 301 CPU 0 Unable to handle kernel paging request at virtual address 000000000203bd00, epc == ffffffffbfc08364, ra == ffffffffbfc08800 Oops[#1]: CPU: 0 PID: 0 Comm: swapper Not tainted 5.18.0-rc2-00254-gfb649bda6f56-dirty #121 $ 0 : 0000000000000000 0000000000000001 0000000000000023 ffffffff80684ba0 $ 4 : 000000000203bd00 ffffffffbfc0f3b4 ffffffffffffffff 0000000000000073 $ 8 : 0a303d7469000000 0000000000000000 0000000000000073 ffffffffbfc0f473 $12 : 0000000000000002 0000000000000000 ffffffff80684c1c 0000000000000000 $16 : 0000000000000000 ffffffff80596dc9 0000000000000000 ffffffffbfc09240 $20 : ffffffff80684c40 ffffffffbfc0f400 000000000000002d 000000000000002b $24 : ffffffffffffffbf 000000000203bd00 $28 : ffffffff805f0000 ffffffff80684b58 0000000000000030 ffffffffbfc08800 Hi : 0000000000000000 Lo : 0000000000000aa8 epc : ffffffffbfc08364 0xffffffffbfc08364 ra : ffffffffbfc08800 0xffffffffbfc08800 Status: 140120e2 KX SX UX KERNEL EXL Cause : 00000008 (ExcCode 02) BadVA : 000000000203bd00 PrId : 00000430 (R4000SC) Modules linked in: Process swapper (pid: 0, threadinfo=(____ptrval____), task=(____ptrval____), tls=0000000000000000) Stack : 0000000000000000 0000000000000000 0000000000000000 0000004d0000004d 80684cc0806a2a40 80596dc80000004d 8061000000000000 bfc0850c80684c38 0000000000000000 000000000203bd00 0000000000000000 0000000000000000 0000000000000000 00000000bfc0f3b4 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000002500000000 0000000000000000 0000000000000000 802c1a7400000000 0203bd0080596dc8 0203bd4d69000000 6c61632000000018 5f746567646e6172 6c616320625f6d6f 5f736e5f6d6f7266 206361323778302b 303d74696e726320 806a0a38806b0000 806a0a38806b0000 00000000806b0000 80683c58806b0000 ... Call Trace: Code: a082ffff 03e00008 00601021 <80820000> 00001821 10400005 24840001 80820000 24630001 ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Fatal exception in interrupt KN04 V2.1k (PC: 0xa0026768, SP: 0x806848e8) >> In this case the pointer in $4 was truncated from 0x980000000203bd00 to 0x000000000203bd00. This may happen when no final console driver has been enabled in the configuration and consequently the initial console continues being used late into bootstrap or with an upcoming change that will switch the zs driver to use a platform device, which in turn will make the console handover happen only after other kernel threads have already been started. Fix the issue by making the buffer static and initdata, and therefore placed in the CKSEG0 32-bit compatibility segment, observing that the console output handler is called with the console lock held, implying no need for this code to be reentrant. Add an assertion to verify the buffer actually has been placed in a compatibility segment.

Auf git.kernel.org kann das Advisory eingesehen werden. Die Identifikation der Schwachstelle findet seit dem 19.07.2026 als CVE-2026-64252 statt. Sie ist leicht auszunutzen. Der Angriff muss lokal passieren. Nicht vorhanden sind sowohl technische Details als auch ein Exploit zur Schwachstelle. Als Preis für einen Exploit ist zur Zeit ungefähr mit USD $0-$5k zu rechnen (Preisberechnung vom 24.07.2026).

Ein Upgrade auf die Version 5.10.260, 5.15.211, 6.1.177, 6.6.144, 6.12.95, 6.18.38, 7.1.3 oder 7.2-rc1 vermag dieses Problem zu beheben. Die Schwachstelle lässt sich auch durch das Einspielen des Patches 9e22b6fc6532cd566dad6d89d8fb3885248e364a/1c80327dedf05b8c8ca025b76c21235b19dd3a86/8a15826e5d3bdcfbef2f8e9330c69ea9ee7282e7/ab465495b1ed5efb7d2f9b90d8b20b1e0473e26f/35212f2adc2cf15122b96b987519de235b855e46/6e61fc2e06e44b6d30248cc5bc47a58e75c2b43e/07c245bc39f94481fd75ff1ed54f7ab97111f3dd/7fb13fd35110ebe95eb053faf79d018f51144d85 beheben.

If you want to get best quality of vulnerability data, you may have to visit VulDB.

Produktinfo

Typ

Hersteller

Name

Version

Lizenz

Webseite

CPE 2.3info

CPE 2.2info

CVSSv4info

VulDB Vector: 🔒
VulDB Zuverlässigkeit: 🔍

CVSSv3info

VulDB Meta Base Score: 8.8
VulDB Meta Temp Score: 8.4

VulDB Base Score: 8.8
VulDB Temp Score: 8.4
VulDB Vector: 🔒
VulDB Zuverlässigkeit: 🔍

CVSSv2info

AVACAuCIA
💳💳💳💳💳💳
💳💳💳💳💳💳
💳💳💳💳💳💳
VektorKomplexitätAuthentisierungVertraulichkeitIntegritätVerfügbarkeit
freischaltenfreischaltenfreischaltenfreischaltenfreischaltenfreischalten
freischaltenfreischaltenfreischaltenfreischaltenfreischaltenfreischalten
freischaltenfreischaltenfreischaltenfreischaltenfreischaltenfreischalten

VulDB Base Score: 🔒
VulDB Temp Score: 🔒
VulDB Zuverlässigkeit: 🔍

Exploitinginfo

Klasse: Pufferüberlauf
CWE: CWE-120 / CWE-119
CAPEC: 🔒
ATT&CK: 🔒

Physisch: Teilweise
Lokal: Ja
Remote: Nein

Verfügbarkeit: 🔒
Status: Nicht definiert
Preisentwicklung: 🔍
Aktuelle Preisschätzung: 🔒

0-Dayfreischaltenfreischaltenfreischaltenfreischalten
Heutefreischaltenfreischaltenfreischaltenfreischalten

Threat Intelligenceinfo

Interesse: 🔍
Aktive Akteure: 🔍
Aktive APT Gruppen: 🔍

Gegenmassnahmeninfo

Empfehlung: Upgrade
Status: 🔍

0-Day Time: 🔒

Upgrade: Kernel 5.10.260/5.15.211/6.1.177/6.6.144/6.12.95/6.18.38/7.1.3/7.2-rc1
Patch: 9e22b6fc6532cd566dad6d89d8fb3885248e364a/1c80327dedf05b8c8ca025b76c21235b19dd3a86/8a15826e5d3bdcfbef2f8e9330c69ea9ee7282e7/ab465495b1ed5efb7d2f9b90d8b20b1e0473e26f/35212f2adc2cf15122b96b987519de235b855e46/6e61fc2e06e44b6d30248cc5bc47a58e75c2b43e/07c245bc39f94481fd75ff1ed54f7ab97111f3dd/7fb13fd35110ebe95eb053faf79d018f51144d85

Timelineinfo

19.07.2026 CVE zugewiesen
24.07.2026 +5 Tage Advisory veröffentlicht
24.07.2026 +0 Tage VulDB Eintrag erstellt
24.07.2026 +0 Tage VulDB Eintrag letzte Aktualisierung

Quelleninfo

Hersteller: kernel.org

Advisory: git.kernel.org
Status: Bestätigt

CVE: CVE-2026-64252 (🔒)
GCVE (CVE): GCVE-0-2026-64252
GCVE (VulDB): GCVE-100-382994

Eintraginfo

Erstellt: 24.07.2026 19:33
Anpassungen: 24.07.2026 19:33 (58)
Komplett: 🔍
Cache ID: 216::103

If you want to get best quality of vulnerability data, you may have to visit VulDB.

Diskussion

Bisher keine Kommentare. Sprachen: de + en.

Bitte loggen Sie sich ein, um kommentieren zu können.

Do you know our Splunk app?

Download it now for free!