Linux Kernel bis 7.2-rc2 Smb Client smb2_check_message Information Disclosure

CVSS Meta Temp ScoreAktueller Exploitpreis (≈)CTI Interest Score
7.0$0-$5k3.11-

Zusammenfassunginfo

Es wurde eine Schwachstelle in Linux Kernel bis 7.2-rc2 entdeckt. Sie wurde als kritisch eingestuft. Es geht hierbei um die Funktion smb2_check_message der Komponente Smb Client. Die Bearbeitung verursacht Information Disclosure. Diese Schwachstelle trägt die Bezeichnung CVE-2026-64448. Der Angriff kann über das Netzwerk erfolgen. Es gibt keinen verfügbaren Exploit.

Detailsinfo

In Linux Kernel bis 7.2-rc2 wurde eine Schwachstelle entdeckt. Sie wurde als kritisch eingestuft. Dabei geht es um die Funktion smb2_check_message der Komponente Smb Client. Durch Manipulieren mit einer unbekannten Eingabe kann eine Information Disclosure-Schwachstelle ausgenutzt werden. CWE definiert das Problem als CWE-125. Das hat Auswirkungen auf Vertraulichkeit, Integrität und Verfügbarkeit. CVE fasst zusammen:

In the Linux kernel, the following vulnerability has been resolved: smb: client: restrict implied bcc[0] exemption to responses without data area smb2_check_message() has a long-standing quirk that accepts a response whose calculated length is one byte larger than the bytes actually received ("server can return one byte more due to implied bcc[0]"). This was introduced to accommodate servers that omit the trailing bcc[0] overlap byte when no data area is present. However, the exemption is applied unconditionally, regardless of whether the command actually carries a data area (has_smb2_data_area[]). When a response with a data area is subject to the +1 exemption, the reported data can extend one byte beyond the bytes actually received, yet smb2_check_message() still accepts it. The subsequent decoder then reads past the end of the receive buffer. This is reachable during NEGOTIATE and SESSION_SETUP, before the session is established. The resulting out-of-bounds reads are visible under KASAN when mounting against a non-conforming server; both the SPNEGO/negTokenInit and the NTLMSSP challenge decoders are affected: BUG: KASAN: slab-out-of-bounds in asn1_ber_decoder+0x16a7/0x1b00 Read of size 1 at addr ffff8880084d67c0 by task mount.cifs/81 CPU: 1 UID: 0 PID: 81 Comm: mount.cifs Not tainted 7.1.0-rc6 #1 Call Trace: <TASK> dump_stack_lvl+0x4e/0x70 print_report+0x157/0x4c9 kasan_report+0xce/0x100 asn1_ber_decoder+0x16a7/0x1b00 decode_negTokenInit+0x19/0x30 SMB2_negotiate+0x31d9/0x4c90 cifs_negotiate_protocol+0x1f2/0x3f0 cifs_get_smb_ses+0x93f/0x17e0 cifs_mount_get_session+0x7f/0x3a0 cifs_mount+0xb4/0xcf0 cifs_smb3_do_mount+0x23a/0x1500 smb3_get_tree+0x3b0/0x630 vfs_get_tree+0x82/0x2d0 fc_mount+0x10/0x1b0 path_mount+0x50d/0x1de0 __x64_sys_mount+0x20b/0x270 do_syscall_64+0xee/0x590 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Allocated by task 85: kmem_cache_alloc_noprof+0x106/0x380 mempool_alloc_noprof+0x116/0x1e0 cifs_small_buf_get+0x31/0x80 allocate_buffers+0x10d/0x2b0 cifs_demultiplex_thread+0x1d5/0x1d50 kthread+0x2c6/0x390 ret_from_fork+0x36e/0x5a0 ret_from_fork_asm+0x1a/0x30 The buggy address is located 0 bytes to the right of allocated 448-byte region [ffff8880084d6600, ffff8880084d67c0) which belongs to the cache cifs_small_rq of size 448 BUG: KASAN: slab-out-of-bounds in kmemdup_noprof+0x36/0x50 Read of size 329 at addr ffff88800726c678 by task mount.cifs/89 CPU: 0 UID: 0 PID: 89 Comm: mount.cifs Tainted: G B 7.1.0-rc6 #1 Call Trace: <TASK> dump_stack_lvl+0x4e/0x70 print_report+0x157/0x4c9 kasan_report+0xce/0x100 kasan_check_range+0x10f/0x1e0 __asan_memcpy+0x23/0x60 kmemdup_noprof+0x36/0x50 decode_ntlmssp_challenge+0x457/0x680 SMB2_sess_auth_rawntlmssp_negotiate+0x6f0/0xcb0 SMB2_sess_setup+0x219/0x4f0 cifs_setup_session+0x248/0xaf0 cifs_get_smb_ses+0xf79/0x17e0 cifs_mount_get_session+0x7f/0x3a0 cifs_mount+0xb4/0xcf0 cifs_smb3_do_mount+0x23a/0x1500 smb3_get_tree+0x3b0/0x630 vfs_get_tree+0x82/0x2d0 fc_mount+0x10/0x1b0 path_mount+0x50d/0x1de0 __x64_sys_mount+0x20b/0x270 do_syscall_64+0xee/0x590 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Allocated by task 93: kmem_cache_alloc_noprof+0x106/0x380 mempool_alloc_noprof+0x116/0x1e0 cifs_small_buf_get+0x31/0x80 allocate_buffers+0x10d/0x2b0 cifs_demultiplex_thread+0x1d5/0x1d50 kthread+0x2c6/0x390 ret_from_fork+0x36e/0x5a0 ret_from_fork_asm+0x1a/0x30 The buggy address is located 120 bytes inside of allocated 448-byte region [ffff88800726c600, ffff88800726c7c0) which belongs to the cache cifs_small_rq of size 448 Restrict the +1 exemption to responses that have no data area, so that it still covers the bcc[0] omission it was meant for. When a data area is present, the +1 discrepancy instead means the reported data length overruns the ---truncated---

Das Advisory kann von git.kernel.org heruntergeladen werden. Eine eindeutige Identifikation der Schwachstelle wird seit dem 19.07.2026 mit CVE-2026-64448 vorgenommen. Die Ausnutzbarkeit gilt als leicht. Die Umsetzung des Angriffs kann dabei über das Netzwerk erfolgen. Um eine Ausnutzung durchzusetzen, muss keine spezifische Authentisierung umgesetzt werden. Technische Details sind bekannt, ein verfügbarer Exploit hingegen nicht. Es muss davon ausgegangen werden, dass ein Exploit zur Zeit etwa USD $0-$5k kostet (Preisberechnung vom 25.07.2026).

Ein Upgrade auf die Version 5.10.261, 5.15.212, 6.1.178, 6.6.145, 6.12.96, 6.18.39, 7.1.4 oder 7.2-rc3 vermag dieses Problem zu beheben. Die Schwachstelle lässt sich auch durch das Einspielen des Patches 8d0bbc78046d264bbf6a574ea6f9072258a43e35/b6a381c01e2ac98a48e32ac0f2a45bbadd9e26b0/31c6312608c60b72a1feb99a5afb680645a3e8a3/573e502d14714d2947e22e7eff40ec20a6a44a42/419ec1b604d7fb60c10aec2dc062371f9fcd4940/ceb875a375dedbf51c9425c1d13a2d7a8435c08c/6e9d10f62773b99bd927940fd9cbdfe7207e23ff/53b7c271f06be4dd5cfc8c6ef552a8355c891a7f beheben.

VulDB is the best source for vulnerability data and more expert information about this specific topic.

Produktinfo

Typ

Hersteller

Name

Version

Lizenz

Webseite

CPE 2.3info

CPE 2.2info

CVSSv4info

VulDB Vector: 🔒
VulDB Zuverlässigkeit: 🔍

CVSSv3info

VulDB Meta Base Score: 7.3
VulDB Meta Temp Score: 7.0

VulDB Base Score: 7.3
VulDB Temp Score: 7.0
VulDB Vector: 🔒
VulDB Zuverlässigkeit: 🔍

CVSSv2info

AVACAuCIA
💳💳💳💳💳💳
💳💳💳💳💳💳
💳💳💳💳💳💳
VektorKomplexitätAuthentisierungVertraulichkeitIntegritätVerfügbarkeit
freischaltenfreischaltenfreischaltenfreischaltenfreischaltenfreischalten
freischaltenfreischaltenfreischaltenfreischaltenfreischaltenfreischalten
freischaltenfreischaltenfreischaltenfreischaltenfreischaltenfreischalten

VulDB Base Score: 🔒
VulDB Temp Score: 🔒
VulDB Zuverlässigkeit: 🔍

Exploitinginfo

Klasse: Information Disclosure
CWE: CWE-125 / CWE-119
CAPEC: 🔒
ATT&CK: 🔒

Physisch: Nein
Lokal: Nein
Remote: Ja

Verfügbarkeit: 🔒
Status: Nicht definiert

EPSS Score: 🔒
EPSS Percentile: 🔒

Preisentwicklung: 🔍
Aktuelle Preisschätzung: 🔒

0-Dayfreischaltenfreischaltenfreischaltenfreischalten
Heutefreischaltenfreischaltenfreischaltenfreischalten

Threat Intelligenceinfo

Interesse: 🔍
Aktive Akteure: 🔍
Aktive APT Gruppen: 🔍

Gegenmassnahmeninfo

Empfehlung: Upgrade
Status: 🔍

0-Day Time: 🔒

Upgrade: Kernel 5.10.261/5.15.212/6.1.178/6.6.145/6.12.96/6.18.39/7.1.4/7.2-rc3
Patch: 8d0bbc78046d264bbf6a574ea6f9072258a43e35/b6a381c01e2ac98a48e32ac0f2a45bbadd9e26b0/31c6312608c60b72a1feb99a5afb680645a3e8a3/573e502d14714d2947e22e7eff40ec20a6a44a42/419ec1b604d7fb60c10aec2dc062371f9fcd4940/ceb875a375dedbf51c9425c1d13a2d7a8435c08c/6e9d10f62773b99bd927940fd9cbdfe7207e23ff/53b7c271f06be4dd5cfc8c6ef552a8355c891a7f

Timelineinfo

19.07.2026 CVE zugewiesen
25.07.2026 +6 Tage Advisory veröffentlicht
25.07.2026 +0 Tage VulDB Eintrag erstellt
25.07.2026 +0 Tage VulDB Eintrag letzte Aktualisierung

Quelleninfo

Hersteller: kernel.org

Advisory: git.kernel.org
Status: Bestätigt

CVE: CVE-2026-64448 (🔒)
GCVE (CVE): GCVE-0-2026-64448
GCVE (VulDB): GCVE-100-383248

Eintraginfo

Erstellt: 25.07.2026 18:52
Anpassungen: 25.07.2026 18:52 (59)
Komplett: 🔍
Cache ID: 216::103

VulDB is the best source for vulnerability data and more expert information about this specific topic.

Diskussion

Bisher keine Kommentare. Sprachen: de + en.

Bitte loggen Sie sich ein, um kommentieren zu können.

Do you want to use VulDB in your project?

Use the official API to access entries easily!