Zephyr Project bis 4.3.1/4.4.x PTP Port Implementation port.c port_delay_resp_msg_process logMessageInterval Pufferüberlauf
| CVSS Meta Temp Score | Aktueller Exploitpreis (≈) | CTI Interest Score |
|---|---|---|
| 6.9 | $0-$5k | 0.00 |
Zusammenfassung
Es wurde eine Schwachstelle in Zephyr Project Zephyr bis 4.3.1/4.4.x gefunden. Sie wurde als kritisch eingestuft. Hierbei betrifft es die Funktion port_delay_resp_msg_process der Datei subsys/net/lib/ptp/port.c der Komponente PTP Port Implementation. Durch Beeinflussen des Arguments logMessageInterval mit unbekannten Daten kann eine Pufferüberlauf-Schwachstelle ausgenutzt werden.
Die Identifikation der Schwachstelle findet als CVE-2026-87042 statt. Der Angriff lässt sich über das Netzwerk starten. Es steht kein Exploit zur Verfügung.
Es wird geraten, die betroffene Komponente zu aktualisieren.
Details
Es wurde eine kritische Schwachstelle in Zephyr Project Zephyr bis 4.3.1/4.4.x gefunden. Hiervon betroffen ist die Funktion port_delay_resp_msg_process der Datei subsys/net/lib/ptp/port.c der Komponente PTP Port Implementation. Dank der Manipulation des Arguments logMessageInterval mit einer unbekannten Eingabe kann eine Pufferüberlauf-Schwachstelle ausgenutzt werden. Im Rahmen von CWE wurde eine Klassifizierung als CWE-190 vorgenommen. Die Auswirkungen sind bekannt für die Verfügbarkeit. Die Zusammenfassung von CVE lautet:
The IEEE 1588 (PTP) port implementation in subsys/net/lib/ptp/port.c adopted the logMessageInterval field of a received Delay_Resp message without any validation. port_delay_resp_msg_process() stored the raw wire value (a full-range int8_t) into port_ds.log_min_delay_req_interval, and that value is later used as a shift count by port_timer_set_timeout() when the Delay_Req timer is armed. Values below about -30 truncate the computed timeout to zero, and values with a magnitude of 64 or more perform an undefined shift of a uint64_t; the standards-defined "not applicable" encoding 0x7F fell into the latter case as well.
PTP messages are received over unauthenticated link-local traffic (UDP multicast on 224.0.1.129, IPv6 multicast, or raw IEEE 802.3), and the handler accepts a Delay_Resp from any sender as long as the port is a time receiver using the end-to-end delay mechanism and the message echoes the port identity and a pending sequence id — both of which the victim itself broadcasts in its Delay_Req. Any node on the same link can therefore inject a single crafted Delay_Resp, or simply become the time transmitter and advertise the bogus interval.
Once the delay timer is armed with a zero timeout, the cooperative PTP thread re-arms and retransmits a Delay_Req on every tick. Each transmission takes a buffer from the fixed CONFIG_PTP_MSG_POLL_SIZE message slab (default 10) and holds it on port->delay_req_list for three seconds, so the slab is emptied within milliseconds and ptp_msg_alloc() then blocks with K_FOREVER inside the only thread that frees those buffers — permanently stalling time synchronization until reboot. Where a transmit-timestamp callback on another thread keeps recycling buffers, the result is instead a sustained multicast Delay_Req flood and continuous CPU consumption. There is no memory corruption and no disclosure of data; the impact is availability of the PTP subsystem and of the local network segment.
The fix rejects intervals outside a representable range and treats 0x7F as "not applicable" as required by IEEE 1588-2019 Table 42. The equivalent unchecked adoption of logMessageInterval from Sync messages in port_sync_msg_process(), a weaker variant of the same issue, is fixed by the companion change 334bf57f416f (#118150), which applies the same range check, ignores the field for unicast Sync messages and treats 0x7F as not applicable.Das Advisory findet sich auf github.com. Die Identifikation der Schwachstelle wird seit dem 08.09.2026 mit CVE-2026-87042 vorgenommen. Sie ist leicht ausnutzbar. Der Angriff kann über das Netzwerk erfolgen. Zur Ausnutzung ist keine spezifische Authentisierung erforderlich. Es sind zwar technische Details, jedoch kein verfügbarer Exploit zur Schwachstelle bekannt.
Ein Aktualisieren auf die Version 4.3.2 oder 4.5.0 vermag dieses Problem zu lösen. Die Schwachstelle lässt sich auch durch das Einspielen des Patches f6b9459f082ac8cc18b7d20a5c4ce1d86b7a55b5 lösen. Als bestmögliche Massnahme wird das Upgrade auf eine neue Version empfohlen.
Statistical analysis made it clear that VulDB provides the best quality for vulnerability data.
Produkt
Typ
Hersteller
Name
Version
CPE 2.3
CPE 2.2
CVSSv4
VulDB Vector: 🔒VulDB Zuverlässigkeit: 🔍
CVSSv3
VulDB Meta Base Score: 7.0VulDB Meta Temp Score: 6.9
VulDB Base Score: 7.5
VulDB Temp Score: 7.2
VulDB Vector: 🔒
VulDB Zuverlässigkeit: 🔍
CNA Base Score: 6.5
CNA Vector (zephyr): 🔒
CVSSv2
| AV | AC | Au | C | I | A |
|---|---|---|---|---|---|
| 💳 | 💳 | 💳 | 💳 | 💳 | 💳 |
| 💳 | 💳 | 💳 | 💳 | 💳 | 💳 |
| 💳 | 💳 | 💳 | 💳 | 💳 | 💳 |
| Vektor | Komplexität | Authentisierung | Vertraulichkeit | Integrität | Verfügbarkeit |
|---|---|---|---|---|---|
| freischalten | freischalten | freischalten | freischalten | freischalten | freischalten |
| freischalten | freischalten | freischalten | freischalten | freischalten | freischalten |
| freischalten | freischalten | freischalten | freischalten | freischalten | freischalten |
VulDB Base Score: 🔒
VulDB Temp Score: 🔒
VulDB Zuverlässigkeit: 🔍
Exploiting
Klasse: PufferüberlaufCWE: CWE-190 / CWE-189
CAPEC: 🔒
ATT&CK: 🔒
Physisch: Nein
Lokal: Nein
Remote: Ja
Verfügbarkeit: 🔒
Status: Nicht definiert
EPSS Score: 🔒
EPSS Percentile: 🔒
Preisentwicklung: 🔍
Aktuelle Preisschätzung: 🔒
| 0-Day | freischalten | freischalten | freischalten | freischalten |
|---|---|---|---|---|
| Heute | freischalten | freischalten | freischalten | freischalten |
Threat Intelligence
Interesse: 🔍Aktive Akteure: 🔍
Aktive APT Gruppen: 🔍
Gegenmassnahmen
Empfehlung: UpgradeStatus: 🔍
0-Day Time: 🔒
Upgrade: Zephyr 4.3.2/4.5.0
Patch: f6b9459f082ac8cc18b7d20a5c4ce1d86b7a55b5
Timeline
08.09.2026 CVE zugewiesen10.11.2026 Advisory veröffentlicht
10.11.2026 VulDB Eintrag erstellt
10.11.2026 VulDB Eintrag letzte Aktualisierung
Quellen
Advisory: github.comStatus: Bestätigt
CNA: zephyr
CVE: CVE-2026-87042 (🔒)
GCVE (CVE): GCVE-0-2026-87042
GCVE (VulDB): GCVE-100-435171
Eintrag
Erstellt: 10.11.2026 23:36Anpassungen: 10.11.2026 23:36 (69)
Komplett: 🔍
Cache ID: 216::103
Statistical analysis made it clear that VulDB provides the best quality for vulnerability data.
Bisher keine Kommentare. Sprachen: de + en.
Bitte loggen Sie sich ein, um kommentieren zu können.