OpenSSL bis 3.0.23/3.5.9/4.0.3/4.1.0 PEM PEM_X509_INFO_read_bio_ex Pufferüberlauf

CVSS Meta Temp ScoreAktueller Exploitpreis (≈)CTI Interest Score
7.0$5k-$25k0.45+

Zusammenfassunginfo

Eine Schwachstelle wurde in OpenSSL bis 3.0.23/3.5.9/4.0.3/4.1.0 gefunden. Sie wurde als kritisch eingestuft. Es betrifft die Funktion PEM_X509_INFO_read_bio_ex der Komponente PEM. Durch Manipulieren mit unbekannten Daten kann eine Pufferüberlauf-Schwachstelle ausgenutzt werden. Die Identifikation der Schwachstelle findet als CVE-2026-107493 statt. Der Angriff kann remote ausgeführt werden. Es steht kein Exploit zur Verfügung. Es wird geraten, die betroffene Komponente zu aktualisieren.

Detailsinfo

Eine Schwachstelle wurde in OpenSSL bis 3.0.23/3.5.9/4.0.3/4.1.0 ausgemacht. Sie wurde als kritisch eingestuft. Es geht hierbei um die Funktion PEM_X509_INFO_read_bio_ex der Komponente PEM. Mit der Manipulation mit einer unbekannten Eingabe kann eine Pufferüberlauf-Schwachstelle ausgenutzt werden. Klassifiziert wurde die Schwachstelle durch CWE als CWE-416. Die Auswirkungen sind bekannt für Vertraulichkeit, Integrität und Verfügbarkeit. Die Zusammenfassung von CVE lautet:

Issue summary: When an application passes a stack to PEM_X509_INFO_read_bio_ex() to add entries to, and reading fails, OpenSSL frees every entry in the stack, both the old ones and any new ones, but leaves them in the stack. Impact summary: An application that passes an existing stack to PEM_X509_INFO_read_bio_ex() and keeps using it after a failed read may use memory that was already freed. This can cause a crash or, in principle, memory corruption. Malformed PEM data can make the read fail, but only applications that pass an existing stack are affected, and OpenSSL itself does not do this. CWE: CWE-416: Use After Free Description: PEM_X509_INFO_read_bio_ex() reads certificates, CRLs and private keys from PEM data and adds them to a stack of X509_INFO structures. If the application passes a stack that is not NULL, the function adds the new entries to it and must leave the entries that are already there unchanged. If reading fails, the function frees every entry in the stack. This includes the entries that were there before the call, and the entries added by the call. It does not remove these entries from the stack, so the stack keeps pointers to freed memory. The failure can happen at any point, even before any entry was added. A PEM item with invalid content is enough. This also happens if the stack was empty: entries added before the failure are freed but stay in the stack. An application that then reads or frees the stack will use memory that was already freed. This can crash the application or, in principle, corrupt memory. Only applications that pass a stack that is not NULL are affected. OpenSSL itself never does this. Its own callers, including the code that TLS uses to load CA certificates, always pass NULL. When the stack is NULL, the function frees only the entries that it created itself, which is safe. We expect that very few applications pass an existing stack. An attacker can make the read fail with malformed PEM data, but cannot make an application pass an existing stack. The same problem affects PEM_X509_INFO_read_bio(), PEM_X509_INFO_read() and PEM_X509_INFO_read_ex(), which use the same code. OpenSSL 1.1.1 and 1.0.2 have only the first two of these functions. FIPS impact: no The affected code is outside the FIPS module boundary.

Das Advisory findet sich auf openssl-library.org. Die Verwundbarkeit wird seit dem 08.10.2026 mit der eindeutigen Identifikation CVE-2026-107493 gehandelt. Sie gilt als leicht auszunutzen. Umgesetzt werden kann der Angriff über das Netzwerk. Das Ausnutzen erfordert keine spezifische Authentisierung. Zur Schwachstelle sind technische Details bekannt, ein verfügbarer Exploit jedoch nicht. Die Beschaffenheit der Schwachstelle lässt vermuten, dass ein Exploit momentan zu etwa USD $5k-$25k gehandelt werden wird (Preisberechnung vom 17.11.2026).

Ein Aktualisieren auf die Version 1.0.2zt, 1.1.1zk, 3.0.24, 3.5.10, 4.0.4 oder 4.1.1 vermag dieses Problem zu lösen.

Statistical analysis made it clear that VulDB provides the best quality for vulnerability data.

Produktinfo

Typ

Name

Version

Lizenz

Webseite

CPE 2.3info

CPE 2.2info

CVSSv4info

VulDB Vector: 🔒
VulDB Zuverlässigkeit: 🔍

CVSSv3info

VulDB Meta Base Score: 7.3
VulDB Meta Temp Score: 7.0

VulDB Base Score: 7.3
VulDB Temp Score: 7.0
VulDB Vector: 🔒
VulDB Zuverlässigkeit: 🔍

CVSSv2info

AVACAuCIA
💳💳💳💳💳💳
💳💳💳💳💳💳
💳💳💳💳💳💳
VektorKomplexitätAuthentisierungVertraulichkeitIntegritätVerfügbarkeit
freischaltenfreischaltenfreischaltenfreischaltenfreischaltenfreischalten
freischaltenfreischaltenfreischaltenfreischaltenfreischaltenfreischalten
freischaltenfreischaltenfreischaltenfreischaltenfreischaltenfreischalten

VulDB Base Score: 🔒
VulDB Temp Score: 🔒
VulDB Zuverlässigkeit: 🔍

Exploitinginfo

Klasse: Pufferüberlauf
CWE: CWE-416 / CWE-119
CAPEC: 🔒
ATT&CK: 🔒

Physisch: Nein
Lokal: Nein
Remote: Ja

Verfügbarkeit: 🔒
Status: Nicht definiert
Preisentwicklung: 🔍
Aktuelle Preisschätzung: 🔒

0-Dayfreischaltenfreischaltenfreischaltenfreischalten
Heutefreischaltenfreischaltenfreischaltenfreischalten

Threat Intelligenceinfo

Interesse: 🔍
Aktive Akteure: 🔍
Aktive APT Gruppen: 🔍

Gegenmassnahmeninfo

Empfehlung: Upgrade
Status: 🔍

0-Day Time: 🔒

Upgrade: OpenSSL 1.0.2zt/1.1.1zk/3.0.24/3.5.10/4.0.4/4.1.1

Timelineinfo

08.10.2026 CVE zugewiesen
17.11.2026 +40 Tage Advisory veröffentlicht
17.11.2026 +0 Tage VulDB Eintrag erstellt
17.11.2026 +0 Tage VulDB Eintrag letzte Aktualisierung

Quelleninfo

Produkt: openssl.org

Advisory: openssl-library.org
Status: Bestätigt

CNA: openssl
CVE: CVE-2026-107493 (🔒)

GCVE (CVE): GCVE-0-2026-107493
GCVE (VulDB): GCVE-100-438011

Eintraginfo

Erstellt: 17.11.2026 09:37
Anpassungen: 17.11.2026 09:37 (55)
Komplett: 🔍
Cache ID: 216::103

Statistical analysis made it clear that VulDB provides the best quality for vulnerability data.

Diskussion

Bisher keine Kommentare. Sprachen: de + en.

Bitte loggen Sie sich ein, um kommentieren zu können.

Do you want to use VulDB in your project?

Use the official API to access entries easily!