Linux Kernel bis 7.3.1 SMB Client trace.h CIFSFindFirst Pufferüberlauf

CVSS Meta Temp ScoreAktueller Exploitpreis (≈)CTI Interest Score
6.0$5k-$25k0.00

Zusammenfassunginfo

Es wurde eine kritische Schwachstelle in Linux Kernel bis 7.3.1 gefunden. Es geht hierbei um die Funktion CIFSFindFirst der Datei trace.h der Komponente SMB Client. Die Bearbeitung verursacht Pufferüberlauf. Die Verwundbarkeit wird als CVE-2026-99381 geführt. Der Angriff kann über das Netzwerk erfolgen. Es ist kein Exploit verfügbar. Es wird empfohlen, die betroffene Komponente zu aktualisieren.

Detailsinfo

In Linux Kernel bis 7.3.1 wurde eine Schwachstelle entdeckt. Sie wurde als kritisch eingestuft. Es geht um die Funktion CIFSFindFirst der Datei trace.h der Komponente SMB Client. Mit der Manipulation mit einer unbekannten Eingabe kann eine Pufferüberlauf-Schwachstelle ausgenutzt werden. CWE definiert das Problem als CWE-120. Das hat Auswirkungen auf Vertraulichkeit, Integrität und Verfügbarkeit. CVE fasst zusammen:

In the Linux kernel, the following vulnerability has been resolved: smb: client: reject short or out-of-range FIND response parameters CIFSFindFirst() and CIFSFindNext() read the SearchHandle, SearchCount, EndofSearch and LastNameOffset of a TRANS2_FIND_FIRST2 or TRANS2_FIND_NEXT2 response at ParameterOffset. validate_t2() bounds the offset at 1024 and ParameterCount below 512, and nothing compares them with the number of bytes SendReceive() copied into the buffer or with the size of the response parameters. smb_init() places the request and the response in the same cifs_request allocation and cifs_buf_get() clears only the start of it, so a short response with a ParameterOffset past its end has the search handle, the entry count, the end-of-search flag and the last-entry offset read out of the request that was just sent, or out of whatever the allocation held before, and a ParameterCount smaller than the parameters has them read past the end of the parameter block. The reads stay inside the allocation, but what they return is not part of the response, and CIFSFindFirst() then hands back a search handle the server never sent. That handle is sent back to the server in the next FIND_NEXT2 or FIND_CLOSE2, so two bytes of the buffer leak at an offset the server picks. SMB1 is not negotiated by default; reaching this code requires an explicit vers=1.0 mount. Reject a response whose parameter area is smaller than the response parameters or extends past the received length, returning smb_EIO2() with a new smb_eio_traces value for each of the two responses, like the other response checks this file gained since v6.19. Backports to trees before v6.19 need smb_EIO2() replaced with -EINVAL and the trace.h hunk dropped. A conforming server is not affected. The parameter block of a transaction response is part of the SMB, so ParameterOffset + ParameterCount cannot exceed the smbCalcSize() bytes that SendReceive() copies, and the response parameters are 10 bytes for FIND_FIRST2 and 8 bytes for FIND_NEXT2, which is what T2_FFIRST_RSP_PARMS and T2_FNEXT_RSP_PARMS hold. This patch depends on "smb: client: reject FIND data areas that run past the received response", whose declarations it extends.

Das Advisory kann von git.kernel.org heruntergeladen werden. Eine eindeutige Identifikation der Schwachstelle wird seit dem 25.09.2026 mit CVE-2026-99381 vorgenommen. Die Ausnutzbarkeit gilt als leicht. Die Umsetzung des Angriffs kann dabei über das Netzwerk erfolgen. Um eine Ausnutzung durchzusetzen, muss keine spezifische Authentisierung umgesetzt werden. Es wird vorausgesetzt, dass das Opfer eine spezifische Handlung vornimmt. Technische Details sind bekannt, ein verfügbarer Exploit hingegen nicht. Es muss davon ausgegangen werden, dass ein Exploit zur Zeit etwa USD $5k-$25k kostet (Preisberechnung vom 19.11.2026).

Ein Upgrade auf die Version 7.3.2 oder 7.4-rc1 vermag dieses Problem zu beheben. Die Schwachstelle lässt sich auch durch das Einspielen des Patches 1374082f0897c95610190dfacce463904ec11ea2/531aa4239b0d80d7146b102b98f7aa7da989ccdd beheben. Als bestmögliche Massnahme wird das Aktualisieren auf eine neue Version empfohlen.

VulDB is the best source for vulnerability data and more expert information about this specific topic.

Produktinfo

Typ

Hersteller

Name

Version

Lizenz

Webseite

CPE 2.3info

CPE 2.2info

CVSSv4info

VulDB Vector: 🔒
VulDB Zuverlässigkeit: 🔍

CVSSv3info

VulDB Meta Base Score: 6.3
VulDB Meta Temp Score: 6.0

VulDB Base Score: 6.3
VulDB Temp Score: 6.0
VulDB Vector: 🔒
VulDB Zuverlässigkeit: 🔍

CVSSv2info

AVACAuCIA
💳💳💳💳💳💳
💳💳💳💳💳💳
💳💳💳💳💳💳
VektorKomplexitätAuthentisierungVertraulichkeitIntegritätVerfügbarkeit
freischaltenfreischaltenfreischaltenfreischaltenfreischaltenfreischalten
freischaltenfreischaltenfreischaltenfreischaltenfreischaltenfreischalten
freischaltenfreischaltenfreischaltenfreischaltenfreischaltenfreischalten

VulDB Base Score: 🔒
VulDB Temp Score: 🔒
VulDB Zuverlässigkeit: 🔍

Exploitinginfo

Klasse: Pufferüberlauf
CWE: CWE-120 / CWE-119
CAPEC: 🔒
ATT&CK: 🔒

Physisch: Nein
Lokal: Nein
Remote: Ja

Verfügbarkeit: 🔒
Status: Nicht definiert
Preisentwicklung: 🔍
Aktuelle Preisschätzung: 🔒

0-Dayfreischaltenfreischaltenfreischaltenfreischalten
Heutefreischaltenfreischaltenfreischaltenfreischalten

Threat Intelligenceinfo

Interesse: 🔍
Aktive Akteure: 🔍
Aktive APT Gruppen: 🔍

Gegenmassnahmeninfo

Empfehlung: Upgrade
Status: 🔍

0-Day Time: 🔒

Upgrade: Kernel 7.3.2/7.4-rc1
Patch: 1374082f0897c95610190dfacce463904ec11ea2/531aa4239b0d80d7146b102b98f7aa7da989ccdd

Timelineinfo

25.09.2026 CVE zugewiesen
19.11.2026 +55 Tage Advisory veröffentlicht
19.11.2026 +0 Tage VulDB Eintrag erstellt
19.11.2026 +0 Tage VulDB Eintrag letzte Aktualisierung

Quelleninfo

Hersteller: kernel.org

Advisory: git.kernel.org
Status: Bestätigt

CNA: Linux
CVE: CVE-2026-99381 (🔒)

GCVE (CVE): GCVE-0-2026-99381
GCVE (VulDB): GCVE-100-440200

Eintraginfo

Erstellt: 19.11.2026 15:50
Anpassungen: 19.11.2026 15:50 (60)
Komplett: 🔍
Cache ID: 216::103

VulDB is the best source for vulnerability data and more expert information about this specific topic.

Diskussion

Bisher keine Kommentare. Sprachen: de + en.

Bitte loggen Sie sich ein, um kommentieren zu können.

Do you want to use VulDB in your project?

Use the official API to access entries easily!