Linux Kernel bis 6.18.60/7.3.1 SPI PCI1XXXX Driver pci1xxxx_spi_transfer_with_dma Pufferüberlauf

CVSS Meta Temp ScoreAktueller Exploitpreis (≈)CTI Interest Score
7.8$0-$5k0.24

Zusammenfassunginfo

Es wurde eine sehr kritische Schwachstelle in Linux Kernel bis 6.18.60/7.3.1 gefunden. Davon betroffen ist die Funktion pci1xxxx_spi_transfer_with_dma der Komponente SPI PCI1XXXX Driver. Durch das Beeinflussen mit unbekannten Daten kann eine Pufferüberlauf-Schwachstelle ausgenutzt werden. Diese Sicherheitslücke ist unter CVE-2026-99447 bekannt. Der Angriff muss lokal passieren. Es steht kein Exploit zur Verfügung. Es wird geraten, die betroffene Komponente zu aktualisieren.

Detailsinfo

In Linux Kernel bis 6.18.60/7.3.1 wurde eine sehr kritische Schwachstelle gefunden. Das betrifft die Funktion pci1xxxx_spi_transfer_with_dma der Komponente SPI PCI1XXXX Driver. Mit der Manipulation mit einer unbekannten Eingabe kann eine Pufferüberlauf-Schwachstelle ausgenutzt werden. CWE definiert das Problem als CWE-416. Dies wirkt sich aus auf Vertraulichkeit, Integrität und Verfügbarkeit. CVE fasst zusammen:

In the Linux kernel, the following vulnerability has been resolved: spi: spi-pci1xxxx: quiesce DMA engines on transfer timeout If a DMA-mapped transfer times out waiting for DMA_TERM and neither DMA abort interrupt arrived, pci1xxxx_spi_transfer_with_dma() returns through the error label while both DMA engines are still enabled, the done/abort interrupt status is still armed and the transfer state (p->xfer, p->tx_sgl, p->rx_sgl) is still registered. The ISRs keep firing afterwards: they reprogram the DMA engines from p->tx_sgl / p->rx_sgl and signal completion through p->xfer and p->spi_xfer_done, all of which the SPI core is free to unmap or reuse once transfer_one() has returned, which is a use-after-free. A late done interrupt can also start the next transfer queued behind the failed one. Stop both DMA engines, drain the pending done/abort interrupt status and synchronize the DMA IRQs before dropping the in-progress state and the transfer pointers, and re-enable the engines afterwards so that subsequent transfers keep working. The engines are only turned back on once both were confirmed to have stopped: re-enabling an engine that failed to stop would cancel the pending stop request and let it keep running into buffers the SPI core is about to unmap or free, which is exactly the window this patch closes. An engine that failed to stop is left disabled, as the abort paths already do. The DMA interrupt status and mask registers are shared between the two SPI instances, so the cleanup drains only this instance's done/abort status bits instead of masking the interrupt lines, which would also suppress the peer instance's completion interrupts. Also make the DMA ISRs ignore interrupts while no transfer is in progress so that a stray MSI after the cleanup can no longer act on the cleared state. No PCI1XXXX hardware was available for testing and QEMU has no model of this PCIe part, so the timeout path was exercised with a userspace replica of the timeout branch and the DMA ISRs, with the register and interrupt accesses mocked: on the unfixed code both a wedged engine that clears after the timeout and a late done interrupt touch the freed transfer state, while with this fix applied neither does and an engine that failed to stop is left disabled. The module was also loaded and unloaded in a QEMU x86_64 guest running a kernel with this fix applied.

Auf git.kernel.org kann das Advisory eingesehen werden. Eine eindeutige Identifikation der Schwachstelle wird seit dem 25.09.2026 mit CVE-2026-99447 vorgenommen. Sie gilt als leicht ausnutzbar. Die Umsetzung des Angriffs hat dabei lokal zu erfolgen. Das Angehen einer erweiterte Authentisierung ist erforderlich, um eine Ausnutzung anzugehen. Technische Details sind bekannt, ein verfügbarer Exploit hingegen nicht. Als Preis für einen Exploit ist zur Zeit ungefähr mit USD $0-$5k zu rechnen (Preisberechnung vom 19.11.2026).

Ein Upgrade auf die Version 6.18.61, 7.3.2 oder 7.4-rc1 vermag dieses Problem zu beheben. Die Schwachstelle lässt sich auch durch das Einspielen des Patches 733552f8c5f5fdce6b2a135dfa2a05ead9f66e91/d858330e288a7818cf6d52ed1bd62153f4cd35c0/0b591332a2bdc13d3f9163793131fe3651d1556a beheben. Als bestmögliche Massnahme wird das Aktualisieren auf eine neue Version empfohlen.

If you want to get best quality of vulnerability data, you may have to visit VulDB.

Produktinfo

Typ

Hersteller

Name

Version

Lizenz

Webseite

CPE 2.3info

CPE 2.2info

CVSSv4info

VulDB Vector: 🔒
VulDB Zuverlässigkeit: 🔍

CVSSv3info

VulDB Meta Base Score: 8.2
VulDB Meta Temp Score: 7.8

VulDB Base Score: 8.2
VulDB Temp Score: 7.8
VulDB Vector: 🔒
VulDB Zuverlässigkeit: 🔍

CVSSv2info

AVACAuCIA
💳💳💳💳💳💳
💳💳💳💳💳💳
💳💳💳💳💳💳
VektorKomplexitätAuthentisierungVertraulichkeitIntegritätVerfügbarkeit
freischaltenfreischaltenfreischaltenfreischaltenfreischaltenfreischalten
freischaltenfreischaltenfreischaltenfreischaltenfreischaltenfreischalten
freischaltenfreischaltenfreischaltenfreischaltenfreischaltenfreischalten

VulDB Base Score: 🔒
VulDB Temp Score: 🔒
VulDB Zuverlässigkeit: 🔍

Exploitinginfo

Klasse: Pufferüberlauf
CWE: CWE-416 / CWE-119
CAPEC: 🔒
ATT&CK: 🔒

Physisch: Teilweise
Lokal: Ja
Remote: Nein

Verfügbarkeit: 🔒
Status: Nicht definiert
Preisentwicklung: 🔍
Aktuelle Preisschätzung: 🔒

0-Dayfreischaltenfreischaltenfreischaltenfreischalten
Heutefreischaltenfreischaltenfreischaltenfreischalten

Threat Intelligenceinfo

Interesse: 🔍
Aktive Akteure: 🔍
Aktive APT Gruppen: 🔍

Gegenmassnahmeninfo

Empfehlung: Upgrade
Status: 🔍

0-Day Time: 🔒

Upgrade: Kernel 6.18.61/7.3.2/7.4-rc1
Patch: 733552f8c5f5fdce6b2a135dfa2a05ead9f66e91/d858330e288a7818cf6d52ed1bd62153f4cd35c0/0b591332a2bdc13d3f9163793131fe3651d1556a

Timelineinfo

25.09.2026 CVE zugewiesen
19.11.2026 +55 Tage Advisory veröffentlicht
19.11.2026 +0 Tage VulDB Eintrag erstellt
19.11.2026 +0 Tage VulDB Eintrag letzte Aktualisierung

Quelleninfo

Hersteller: kernel.org

Advisory: git.kernel.org
Status: Bestätigt

CNA: Linux
CVE: CVE-2026-99447 (🔒)

GCVE (CVE): GCVE-0-2026-99447
GCVE (VulDB): GCVE-100-440266

Eintraginfo

Erstellt: 19.11.2026 16:11
Anpassungen: 19.11.2026 16:11 (59)
Komplett: 🔍
Cache ID: 216::103

If you want to get best quality of vulnerability data, you may have to visit VulDB.

Diskussion

Bisher keine Kommentare. Sprachen: de + en.

Bitte loggen Sie sich ein, um kommentieren zu können.

Might our Artificial Intelligence support you?

Check our Alexa App!