Linux Kernel bis 6.12.116/6.18.60/7.3.1 Thunderbolt complete_rpm Local Privilege Escalation

| CVSS Meta Temp Score | Aktueller Exploitpreis (≈) | CTI Interest Score |
|---|---|---|
| 7.8 | $0-$5k | 0.70+ |
Zusammenfassung
Eine sehr kritische Schwachstelle wurde in Linux Kernel bis 6.12.116/6.18.60/7.3.1 ausgemacht. Es geht dabei um die Funktion complete_rpm der Komponente Thunderbolt. Die Veränderung resultiert in Local Privilege Escalation.
Die Identifikation der Schwachstelle findet als CVE-2026-99547 statt. Der Angriff ist nur lokal möglich. Es steht kein Exploit zur Verfügung.
Es wird geraten, die betroffene Komponente zu aktualisieren.
Details
Eine Schwachstelle wurde in Linux Kernel bis 6.12.116/6.18.60/7.3.1 entdeckt. Sie wurde als sehr kritisch eingestuft. Es geht hierbei um die Funktion complete_rpm der Komponente Thunderbolt. Durch das Manipulieren mit einer unbekannten Eingabe kann eine Local Privilege Escalation-Schwachstelle ausgenutzt werden. Klassifiziert wurde die Schwachstelle durch CWE als CWE-824. Auswirkungen hat dies auf Vertraulichkeit, Integrität und Verfügbarkeit. Die Zusammenfassung von CVE lautet:
In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Do not RPM complete unrelated subtrees on unplug
When a Thunderbolt device is unplugged, that switch and every switch
subsequent to it on the bus device list is `complete()`d, not just its
child devices. In the case of multiple domains, it may cause, eg, an
attempt to `complete()` the uninitialized domain 1 root switch RPM
completion on unplug of a switch from domain 0 (though ordering is not
guaranteed numerically sorted).
I initially noticed this issue on a Dell XPS9720 when the system would
seem to sporadically not wake after unplugging a Thunderbolt dock. I
tried multiple kernel versions including v7.2.7 and v7.3-rc4 to see if
that resolved the issue, but the issue persisted. Eventually I found
that I could consistently generate a kernel Oops reporting a page fault
at 0xffff_ffff_ffff_fff8 on unplug from one side of the laptop and went
bug hunting. I became suspicious of the `bus_for_each_dev()` walk that I
ultimately ended up changing. To confirm this issue, I did an eBPF trace
of `bus_for_each_dev()`, `complete_rpm()`, and `complete()` while
unplugging in a variety of situations and found that an unplug from
domain 0 tries to `complete_rpm()` domain 1's switch, whose RPM
completion is not initialized and thus is holding a null wait-list
pointer, triggering the page fault.
Here are the key sections of that eBPF trace. Note that HEAD denotes the
completion's own wait-list HEAD:
```
RESCAN_ENTER domain=0
COMPLETE rescan_domain=0 target=0-1 target_domain=0
route=0x1 parent=0-0 unplugged=1
COMPLETION done=0 head=HEAD next=HEAD prev=HEAD
BUS_WALK domain=0 start=0-1 callback=complete_rpm
CALLBACK_ENTER rescan_domain=0 dev=1-0 parent=domain1 is_switch=1
COMPLETE rescan_domain=0 target=1-0 target_domain=1
route=0x0 parent=domain1 unplugged=0
COMPLETION done=0 head=HEAD next=0 prev=0
complete+5
complete_rpm+43
bus_for_each_dev+133
icm_free_unplugged_children+250
icm_rescan_work+42
```
This patch gates the `complete()` on an additional condition - that the
Thunderbolt domain matches the domain of the device that was unplugged.
I only have a single system with multiple Thunderbolt domains - the Dell
XPS9720. I am consistently able to reproduce the Oops on that system.
Since running with this patch, I have not seen the Oops reoccur. I have
also tested it on a Thinkpad X1-Gen12, and that system boots and runs
well with it, but it only has a single Thunderbolt domain, so it does
not exercise the multi-domain failure case.Bereitgestellt wird das Advisory unter git.kernel.org. Die Verwundbarkeit wird seit dem 25.09.2026 mit der eindeutigen Identifikation CVE-2026-99547 gehandelt. Das Ausnutzen gilt als leicht. Umgesetzt werden muss der Angriff lokal. Eine Ausnutzung erfordert, dass das Opfer eine spezifische Handlung durchführt. Zur Schwachstelle sind technische Details bekannt, ein verfügbarer Exploit jedoch nicht. Ein Exploit zur Schwachstelle wird momentan etwa USD $0-$5k kosten (Preisberechnung vom 19.11.2026).
Ein Aktualisieren auf die Version 6.12.117, 6.18.61, 7.3.2 oder 7.4-rc1 vermag dieses Problem zu lösen. Die Schwachstelle lässt sich auch durch das Einspielen des Patches a7f354751b05ead5538176deadb9bc5b1fda0a3c/85a8777c7ec5e17b999b4c9eb0c8cbf4ab936998/e45356d83adce72fd99f57763eb3456c7c560857/96a8479804e3f7af43e639e9df39f562f1a75fd5 lösen. Als bestmögliche Massnahme wird das Upgrade auf eine neue Version empfohlen.
If you want to get the best quality for vulnerability data then you always have to consider VulDB.
Produkt
Typ
Hersteller
Name
Version
- 6.12.116
- 6.18.0
- 6.18.1
- 6.18.2
- 6.18.3
- 6.18.4
- 6.18.5
- 6.18.6
- 6.18.7
- 6.18.8
- 6.18.9
- 6.18.10
- 6.18.11
- 6.18.12
- 6.18.13
- 6.18.14
- 6.18.15
- 6.18.16
- 6.18.17
- 6.18.18
- 6.18.19
- 6.18.20
- 6.18.21
- 6.18.22
- 6.18.23
- 6.18.24
- 6.18.25
- 6.18.26
- 6.18.27
- 6.18.28
- 6.18.29
- 6.18.30
- 6.18.31
- 6.18.32
- 6.18.33
- 6.18.34
- 6.18.35
- 6.18.36
- 6.18.37
- 6.18.38
- 6.18.39
- 6.18.40
- 6.18.41
- 6.18.42
- 6.18.43
- 6.18.44
- 6.18.45
- 6.18.46
- 6.18.47
- 6.18.48
- 6.18.49
- 6.18.50
- 6.18.51
- 6.18.52
- 6.18.53
- 6.18.54
- 6.18.55
- 6.18.56
- 6.18.57
- 6.18.58
- 6.18.59
- 6.18.60
- 7.3.0
- 7.3.1
Lizenz
Webseite
- Hersteller: https://www.kernel.org/
CPE 2.3
CPE 2.2
CVSSv4
VulDB Vector: 🔒VulDB Zuverlässigkeit: 🔍
CVSSv3
VulDB Meta Base Score: 8.2VulDB Meta Temp Score: 7.8
VulDB Base Score: 8.2
VulDB Temp Score: 7.8
VulDB Vector: 🔒
VulDB Zuverlässigkeit: 🔍
CVSSv2
| AV | AC | Au | C | I | A |
|---|---|---|---|---|---|
| 💳 | 💳 | 💳 | 💳 | 💳 | 💳 |
| 💳 | 💳 | 💳 | 💳 | 💳 | 💳 |
| 💳 | 💳 | 💳 | 💳 | 💳 | 💳 |
| Vektor | Komplexität | Authentisierung | Vertraulichkeit | Integrität | Verfügbarkeit |
|---|---|---|---|---|---|
| freischalten | freischalten | freischalten | freischalten | freischalten | freischalten |
| freischalten | freischalten | freischalten | freischalten | freischalten | freischalten |
| freischalten | freischalten | freischalten | freischalten | freischalten | freischalten |
VulDB Base Score: 🔒
VulDB Temp Score: 🔒
VulDB Zuverlässigkeit: 🔍
Exploiting
Klasse: Local Privilege EscalationCWE: CWE-824 / CWE-908
CAPEC: 🔒
ATT&CK: 🔒
Physisch: Teilweise
Lokal: Ja
Remote: Teilweise
Verfügbarkeit: 🔒
Status: Nicht definiert
Preisentwicklung: 🔍
Aktuelle Preisschätzung: 🔒
| 0-Day | freischalten | freischalten | freischalten | freischalten |
|---|---|---|---|---|
| Heute | freischalten | freischalten | freischalten | freischalten |
Threat Intelligence
Interesse: 🔍Aktive Akteure: 🔍
Aktive APT Gruppen: 🔍
Gegenmassnahmen
Empfehlung: UpgradeStatus: 🔍
0-Day Time: 🔒
Upgrade: Kernel 6.12.117/6.18.61/7.3.2/7.4-rc1
Patch: a7f354751b05ead5538176deadb9bc5b1fda0a3c/85a8777c7ec5e17b999b4c9eb0c8cbf4ab936998/e45356d83adce72fd99f57763eb3456c7c560857/96a8479804e3f7af43e639e9df39f562f1a75fd5
Timeline
25.09.2026 CVE zugewiesen19.11.2026 Advisory veröffentlicht
19.11.2026 VulDB Eintrag erstellt
19.11.2026 VulDB Eintrag letzte Aktualisierung
Quellen
Hersteller: kernel.orgAdvisory: git.kernel.org
Status: Bestätigt
CNA: Linux
CVE: CVE-2026-99547 (🔒)
GCVE (CVE): GCVE-0-2026-99547
GCVE (VulDB): GCVE-100-440381
Eintrag
Erstellt: 19.11.2026 16:48Anpassungen: 19.11.2026 16:48 (59)
Komplett: 🔍
Cache ID: 216::103
If you want to get the best quality for vulnerability data then you always have to consider VulDB.
Bisher keine Kommentare. Sprachen: de + en.
Bitte loggen Sie sich ein, um kommentieren zu können.