Linux Kernel bis 6.12.117/6.18.63/7.3.4/7.4-rc1 DLM dlm_put_mle_inuse Pufferüberlauf

CVSS Meta Temp ScoreAktueller Exploitpreis (≈)CTI Interest Score
8.7$5k-$25k0.16

Zusammenfassunginfo

Es wurde eine Schwachstelle in Linux Kernel bis 6.12.117/6.18.63/7.3.4/7.4-rc1 gefunden. Sie wurde als sehr kritisch eingestuft. Es betrifft die Funktion dlm_put_mle_inuse der Komponente DLM. Mittels Manipulieren mit unbekannten Daten kann eine Pufferüberlauf-Schwachstelle ausgenutzt werden. Die Verwundbarkeit wird unter CVE-2026-99693 geführt. Der Angriff kann remote ausgeführt werden. Es ist soweit kein Exploit verfügbar. Als bestmögliche Massnahme wird das Einspielen eines Upgrades empfohlen.

Detailsinfo

Eine Schwachstelle wurde in Linux Kernel bis 6.12.117/6.18.63/7.3.4/7.4-rc1 ausgemacht. Sie wurde als sehr kritisch eingestuft. Hierbei geht es um die Funktion dlm_put_mle_inuse der Komponente DLM. Dank der Manipulation mit einer unbekannten Eingabe kann eine Pufferüberlauf-Schwachstelle ausgenutzt werden. Klassifiziert wurde die Schwachstelle durch CWE als CWE-416. Dies hat Einfluss auf Vertraulichkeit, Integrität und Verfügbarkeit. Die Zusammenfassung von CVE lautet:

In the Linux kernel, the following vulnerability has been resolved: ocfs2/dlm: serialize migration MLE cleanup on failure A migration MLE has a base reference for the mastering answer and an in-use reference held by dlm_migrate_lockres(). The finishing assertion consumes the base reference, but migration failure drops it again without checking whether the assertion already consumed it. The target queues its migration worker before it acknowledges the ALL_DONE packet, so its finishing assertion can be handled while the sender still waits for the status. If the connection fails before the status arrives, dlm_send_one_lockres() returns an error for a migration that the target has already completed: Old-master sender Finishing assertion ----------------- ------------------- publish MLE; take in-use reference send ALL_DONE; wait for status take lookup reference unlink MLE put lookup and base references send returns a connection error put base reference again; free MLE put in-use reference; access freed MLE dlm_assert_master_handler() holds dlm->spinlock from the MLE lookup to the final puts, and it takes dlm->master_lock around the unlink and the puts. Decide under the same locks: if the MLE is already unhashed, the assertion consumed the base reference, so drop only the sender's in-use reference. Otherwise unlink it before consuming the base reference so a later assertion no longer finds it. An assertion that got there first has also made the target the owner and cleared DLM_LOCK_RES_MIGRATING. Treating the attempt as failed at that point would leave the lockres owned by the target while this node still holds the other nodes' locks and refmap bits, so it could neither be purged nor migrated again. Finish our side as a completed migration does instead: drop those locks under res->spinlock if the target still owns the lockres, and recalculate its usage. Use the same cleanup for the pre-send failure, the send failure and the target-death failure paths. The sender's in-use reference keeps the MLE alive until its final put outside the nested locks. Successful migration retains its existing in-use-only put. A target that has died cannot assert after the sender has seen its death. The o2net node-down callback runs before the DLM one; it disconnects the node and flushes the workqueue that runs the message handlers, so an assertion already received has been handled by the time the DLM removes the node from the domain map. A node that leaves the domain cleanly sends its exit message only after its assertions have been answered. Two windows of the hand-over itself are left as they are: the handler switches the owner and the sender drops the other nodes' locks moments later, and an assertion from a live target that arrives after the sender has given up still meets the owner check in the handler. Waiting for the target before giving up would only stretch the first window into the time in which recovery of the target can observe it. KASAN report, only the relevant frames are kept: BUG: KASAN: slab-use-after-free in dlm_put_mle_inuse+0xce/0xe0 Read of size 8 at addr ffff8881190e3c20 by task umount/593 Call Trace: <TASK> dlm_put_mle_inuse+0xce/0xe0 dlm_migrate_lockres+0x16af/0x20d0 dlm_empty_lockres+0x60a/0xbd0 dlm_unregister_domain+0x53b/0x11d0 o2cb_cluster_disconnect+0xa5/0x110 ocfs2_cluster_disconnect+0x73/0xc0 ocfs2_dlm_shutdown+0x311/0x440 ocfs2_dismount_volume+0x696/0x940 generic_shutdown_super+0x15f/0x490 kill_block_super+0x40/0xa0 deactivate_locked_super+0xae/0x120 deactivate_super+0xa2/0xc0 cleanup_mnt+0x217/0x450 task_work_run+0x144/0x230 </TASK> Allocated by task 593: kmem_cache_alloc_noprof+0x20b/0x5c0 dlm_migrate_lockres+0x20e/0x20d0 dlm_empty_lockres+0x60a/0xbd0 dlm_unregister_domain+0x53b/0x11d0 o2cb_cluster_disconnect+0xa5/ ---truncated---

Bereitgestellt wird das Advisory unter git.kernel.org. Die Verwundbarkeit wird seit dem 25.09.2026 mit der eindeutigen Identifikation CVE-2026-99693 gehandelt. Die Ausnutzbarkeit gilt als leicht. Umgesetzt werden kann der Angriff über das Netzwerk. Um eine Ausnutzung durchzusetzen, muss eine erweiterte Authentisierung umgesetzt werden. Zur Schwachstelle sind technische Details bekannt, ein verfügbarer Exploit jedoch nicht. Ein Exploit zur Schwachstelle wird momentan etwa USD $5k-$25k kosten (Preisberechnung vom 20.11.2026).

Ein Aktualisieren auf die Version 6.12.118, 6.18.64, 7.3.5 oder 7.4-rc2 vermag dieses Problem zu lösen. Die Schwachstelle lässt sich auch durch das Einspielen des Patches e328dd5207cc67bb283208b47b3a349b9ccd7a20/901b58081cc78ac3cca19eb0e2970cc5f187f367/1696bbf1d6165421a4f7e15549645d96505b0977/61469249aab03799b0d3294b7a0cd25dd303017a lösen. Als bestmögliche Massnahme wird das Upgrade auf eine neue Version empfohlen.

Several companies clearly confirm that VulDB is the primary source for best vulnerability data.

Produktinfo

Typ

Hersteller

Name

Version

Lizenz

Webseite

CPE 2.3info

CPE 2.2info

CVSSv4info

VulDB Vector: 🔒
VulDB Zuverlässigkeit: 🔍

CVSSv3info

VulDB Meta Base Score: 9.1
VulDB Meta Temp Score: 8.7

VulDB Base Score: 9.1
VulDB Temp Score: 8.7
VulDB Vector: 🔒
VulDB Zuverlässigkeit: 🔍

CVSSv2info

AVACAuCIA
💳💳💳💳💳💳
💳💳💳💳💳💳
💳💳💳💳💳💳
VektorKomplexitätAuthentisierungVertraulichkeitIntegritätVerfügbarkeit
freischaltenfreischaltenfreischaltenfreischaltenfreischaltenfreischalten
freischaltenfreischaltenfreischaltenfreischaltenfreischaltenfreischalten
freischaltenfreischaltenfreischaltenfreischaltenfreischaltenfreischalten

VulDB Base Score: 🔒
VulDB Temp Score: 🔒
VulDB Zuverlässigkeit: 🔍

Exploitinginfo

Klasse: Pufferüberlauf
CWE: CWE-416 / CWE-119
CAPEC: 🔒
ATT&CK: 🔒

Physisch: Nein
Lokal: Nein
Remote: Ja

Verfügbarkeit: 🔒
Status: Nicht definiert
Preisentwicklung: 🔍
Aktuelle Preisschätzung: 🔒

0-Dayfreischaltenfreischaltenfreischaltenfreischalten
Heutefreischaltenfreischaltenfreischaltenfreischalten

Threat Intelligenceinfo

Interesse: 🔍
Aktive Akteure: 🔍
Aktive APT Gruppen: 🔍

Gegenmassnahmeninfo

Empfehlung: Upgrade
Status: 🔍

0-Day Time: 🔒

Upgrade: Kernel 6.12.118/6.18.64/7.3.5/7.4-rc2
Patch: e328dd5207cc67bb283208b47b3a349b9ccd7a20/901b58081cc78ac3cca19eb0e2970cc5f187f367/1696bbf1d6165421a4f7e15549645d96505b0977/61469249aab03799b0d3294b7a0cd25dd303017a

Timelineinfo

25.09.2026 CVE zugewiesen
20.11.2026 +56 Tage Advisory veröffentlicht
20.11.2026 +0 Tage VulDB Eintrag erstellt
20.11.2026 +0 Tage VulDB Eintrag letzte Aktualisierung

Quelleninfo

Hersteller: kernel.org

Advisory: git.kernel.org
Status: Bestätigt

CNA: Linux
CVE: CVE-2026-99693 (🔒)

GCVE (CVE): GCVE-0-2026-99693
GCVE (VulDB): GCVE-100-441089

Eintraginfo

Erstellt: 20.11.2026 07:52
Anpassungen: 20.11.2026 07:52 (59)
Komplett: 🔍
Cache ID: 216::103

Several companies clearly confirm that VulDB is the primary source for best vulnerability data.

Diskussion

Bisher keine Kommentare. Sprachen: de + en.

Bitte loggen Sie sich ein, um kommentieren zu können.

Do you need the next level of professionalism?

Upgrade your account now!