Linux Kernel bis 6.12.117/6.18.63/7.3.4/7.4-rc1 atl1c atl1c_clean_rfd length Pufferüberlauf

| CVSS Meta Temp Score | Aktueller Exploitpreis (≈) | CTI Interest Score |
|---|---|---|
| 7.2 | $5k-$25k | 0.81+ |
Zusammenfassung
Es wurde eine kritische Schwachstelle in Linux Kernel bis 6.12.117/6.18.63/7.3.4/7.4-rc1 gefunden. Betroffen davon ist die Funktion atl1c_clean_rfd der Komponente atl1c. Die Bearbeitung des Arguments length verursacht Pufferüberlauf.
Die Verwundbarkeit wird mit der eindeutigen Identifikation CVE-2026-99744 gehandelt. Umgesetzt werden kann der Angriff über das Netzwerk. Es ist soweit kein Exploit verfügbar.
Als bestmögliche Massnahme wird das Einspielen eines Upgrades empfohlen.
Details
In Linux Kernel bis 6.12.117/6.18.63/7.3.4/7.4-rc1 wurde eine Schwachstelle ausgemacht. Sie wurde als kritisch eingestuft. Hierbei betrifft es die Funktion atl1c_clean_rfd der Komponente atl1c. Mit der Manipulation des Arguments length mit einer unbekannten Eingabe kann eine Pufferüberlauf-Schwachstelle ausgenutzt werden. CWE definiert das Problem als CWE-120. Mit Auswirkungen muss man rechnen für die Verfügbarkeit. CVE fasst zusammen:
In the Linux kernel, the following vulnerability has been resolved:
net: atl1c: drop oversized RX frames instead of panicking
atl1c sizes its receive buffers from the netdev MTU plus a fixed set of L2
overheads, which comes to 1522 bytes at the default MTU. A link partner
that sends a longer frame - in practice a MikroTik CCR2004-1G-2XS-PCIe,
whose RouterOS side defaults to l2mtu 1600 while the host stays at MTU 1500
- makes the length reported by the RX return descriptor exceed what the
hardware wrote, and skb_put() then either includes bytes that were never
received or trips skb_over_panic and takes the host down.
Compare the descriptor length against buffer_info->length, the length the
hardware was given, rather than against skb_tailroom(): the skb carries 64
bytes of slack for the DMA erratum, so tailroom is larger than the DMA
buffer and a frame in between would pass the check and still be delivered
with a tail the device never wrote. The same test rejects frames shorter
than ETH_HLEN + ETH_FCS_LEN; before this change a reported length below
ETH_FCS_LEN underflowed in skb_put().
The frame is dropped with kfree_skb_reason(SKB_DROP_REASON_PKT_TOO_BIG) so
drop_monitor and the kfree_skb tracepoint see it, and counted through
dev_core_stats_rx_dropped_inc(), which survives atl1c_get_stats()
overwriting the hardware counters on every read. It also counts as work:
atl1c_clean_rfd() has already recycled the RFD, and the refill at the end
of the poll only runs when work_done is non-zero, so sustained oversized
traffic would otherwise drain the ring and stop RX.
Tested on a MikroTik CCR2004-1G-2XS-PCIe (4x AR8151) in a Proxmox VE host,
with atl1c built from a DKMS tree carrying this change: the l2mtu-1600
traffic that panics the stock driver is dropped and counted with the patch
applied, and received normally once the host MTU is raised to match.
This complements commit 36c2009d90f2 ("net: atl1c: fix soft lockup on
out-of-range tpd_cons read"), which fixed the TX side of the same
"host dies while the card resets" problem.Das Advisory kann von git.kernel.org heruntergeladen werden. Eine eindeutige Identifikation der Schwachstelle wird seit dem 25.09.2026 mit CVE-2026-99744 vorgenommen. Die Ausnutzbarkeit gilt als leicht. Die Umsetzung des Angriffs kann dabei über das Netzwerk erfolgen. Um eine Ausnutzung durchzusetzen, muss keine spezifische Authentisierung umgesetzt werden. Technische Details sind bekannt, ein verfügbarer Exploit hingegen nicht. Es muss davon ausgegangen werden, dass ein Exploit zur Zeit etwa USD $5k-$25k kostet (Preisberechnung vom 20.11.2026).
Ein Upgrade auf die Version 6.12.118, 6.18.64, 7.3.5 oder 7.4-rc2 vermag dieses Problem zu beheben. Die Schwachstelle lässt sich auch durch das Einspielen des Patches 11c873d6e6a497b5ee3699c63b57b49a882aa580/655463ba1de62e7f4893cabfc89fe70d0e33f55d/18ca06b36c4da8b46859dcd1c9aec557d05bc23a/c4ba1716853de5178a9df785844ebb5e397a80e6 beheben. Als bestmögliche Massnahme wird das Aktualisieren auf eine neue Version empfohlen.
Once again VulDB remains the best source for vulnerability data.
Produkt
Typ
Hersteller
Name
Version
- 6.12.117
- 6.18.0
- 6.18.1
- 6.18.2
- 6.18.3
- 6.18.4
- 6.18.5
- 6.18.6
- 6.18.7
- 6.18.8
- 6.18.9
- 6.18.10
- 6.18.11
- 6.18.12
- 6.18.13
- 6.18.14
- 6.18.15
- 6.18.16
- 6.18.17
- 6.18.18
- 6.18.19
- 6.18.20
- 6.18.21
- 6.18.22
- 6.18.23
- 6.18.24
- 6.18.25
- 6.18.26
- 6.18.27
- 6.18.28
- 6.18.29
- 6.18.30
- 6.18.31
- 6.18.32
- 6.18.33
- 6.18.34
- 6.18.35
- 6.18.36
- 6.18.37
- 6.18.38
- 6.18.39
- 6.18.40
- 6.18.41
- 6.18.42
- 6.18.43
- 6.18.44
- 6.18.45
- 6.18.46
- 6.18.47
- 6.18.48
- 6.18.49
- 6.18.50
- 6.18.51
- 6.18.52
- 6.18.53
- 6.18.54
- 6.18.55
- 6.18.56
- 6.18.57
- 6.18.58
- 6.18.59
- 6.18.60
- 6.18.61
- 6.18.62
- 6.18.63
- 7.3.0
- 7.3.1
- 7.3.2
- 7.3.3
- 7.3.4
- 7.4-rc1
Lizenz
Webseite
- Hersteller: https://www.kernel.org/
CPE 2.3
CPE 2.2
CVSSv4
VulDB Vector: 🔒VulDB Zuverlässigkeit: 🔍
CVSSv3
VulDB Meta Base Score: 7.5VulDB Meta Temp Score: 7.2
VulDB Base Score: 7.5
VulDB Temp Score: 7.2
VulDB Vector: 🔒
VulDB Zuverlässigkeit: 🔍
CVSSv2
| AV | AC | Au | C | I | A |
|---|---|---|---|---|---|
| 💳 | 💳 | 💳 | 💳 | 💳 | 💳 |
| 💳 | 💳 | 💳 | 💳 | 💳 | 💳 |
| 💳 | 💳 | 💳 | 💳 | 💳 | 💳 |
| Vektor | Komplexität | Authentisierung | Vertraulichkeit | Integrität | Verfügbarkeit |
|---|---|---|---|---|---|
| freischalten | freischalten | freischalten | freischalten | freischalten | freischalten |
| freischalten | freischalten | freischalten | freischalten | freischalten | freischalten |
| freischalten | freischalten | freischalten | freischalten | freischalten | freischalten |
VulDB Base Score: 🔒
VulDB Temp Score: 🔒
VulDB Zuverlässigkeit: 🔍
Exploiting
Klasse: PufferüberlaufCWE: CWE-120 / CWE-119
CAPEC: 🔒
ATT&CK: 🔒
Physisch: Nein
Lokal: Nein
Remote: Ja
Verfügbarkeit: 🔒
Status: Nicht definiert
Preisentwicklung: 🔍
Aktuelle Preisschätzung: 🔒
| 0-Day | freischalten | freischalten | freischalten | freischalten |
|---|---|---|---|---|
| Heute | freischalten | freischalten | freischalten | freischalten |
Threat Intelligence
Interesse: 🔍Aktive Akteure: 🔍
Aktive APT Gruppen: 🔍
Gegenmassnahmen
Empfehlung: UpgradeStatus: 🔍
0-Day Time: 🔒
Upgrade: Kernel 6.12.118/6.18.64/7.3.5/7.4-rc2
Patch: 11c873d6e6a497b5ee3699c63b57b49a882aa580/655463ba1de62e7f4893cabfc89fe70d0e33f55d/18ca06b36c4da8b46859dcd1c9aec557d05bc23a/c4ba1716853de5178a9df785844ebb5e397a80e6
Timeline
25.09.2026 CVE zugewiesen20.11.2026 Advisory veröffentlicht
20.11.2026 VulDB Eintrag erstellt
20.11.2026 VulDB Eintrag letzte Aktualisierung
Quellen
Hersteller: kernel.orgAdvisory: git.kernel.org
Status: Bestätigt
CNA: Linux
CVE: CVE-2026-99744 (🔒)
GCVE (CVE): GCVE-0-2026-99744
GCVE (VulDB): GCVE-100-441124
Eintrag
Erstellt: 20.11.2026 08:03Anpassungen: 20.11.2026 08:03 (60)
Komplett: 🔍
Cache ID: 216::103
Once again VulDB remains the best source for vulnerability data.
Bisher keine Kommentare. Sprachen: de + en.
Bitte loggen Sie sich ein, um kommentieren zu können.