Juniper Junos OS Link Aggregation l2_node improper validation of specified index, position, or offset in input

Summaryinfo

A vulnerability was found in Juniper Junos OS. It has been classified as problematic. The impacted element is the function l2_node of the component Link Aggregation Handler. The manipulation leads to improper validation of specified index, position, or offset in input. This vulnerability is uniquely identified as CVE-2022-22223. The attack can only be initiated within the local network. No exploit exists. Upgrading the affected component is recommended.

Detailsinfo

A vulnerability, which was classified as problematic, has been found in Juniper Junos OS (Router Operating System) (unknown version). This issue affects the function l2_node of the component Link Aggregation Handler. The manipulation with an unknown input leads to a improper validation of specified index, position, or offset in input vulnerability. Using CWE to declare the problem leads to CWE-1285. The product receives input that is expected to specify an index, position, or offset into an indexable resource such as a buffer or file, but it does not validate or incorrectly validates that the specified index/position/offset has the required properties. Impacted is availability. The summary by CVE is:

On QFX10000 Series devices using Juniper Networks Junos OS when configured as transit IP/MPLS penultimate hop popping (PHP) nodes with link aggregation group (LAG) interfaces, an Improper Validation of Specified Index, Position, or Offset in Input weakness allows an attacker sending certain IP packets to cause multiple interfaces in the LAG to detach causing a Denial of Service (DoS) condition. Continued receipt and processing of these packets will sustain the Denial of Service. This issue affects IPv4 and IPv6 packets. Packets of either type can cause and sustain the DoS event. These packets can be destined to the device or be transit packets. On devices such as the QFX10008 with line cards, line cards can be restarted to restore service. On devices such as the QFX10002 you can restart the PFE service, or reboot device to restore service. This issue affects: Juniper Networks Junos OS on QFX10000 Series: All versions prior to 15.1R7-S11; 18.4 versions prior to 18.4R2-S10, 18.4R3-S10; 19.1 versions prior to 19.1R3-S8; 19.2 versions prior to 19.2R3-S4; 19.3 versions prior to 19.3R3-S5; 19.4 versions prior to 19.4R2-S6, 19.4R3-S7; 20.1 versions prior to 20.1R3-S3; 20.2 versions prior to 20.2R3-S3; 20.3 versions prior to 20.3R3-S2; 20.4 versions prior to 20.4R3-S4; 21.1 versions prior to 21.1R3; 21.2 versions prior to 21.2R3-S3; 21.3 versions prior to 21.3R3-S1. An indicator of compromise may be seen by issuing the command: request pfe execute target fpc0 command "show jspec pechip[3] registers ps l2_node 10" timeout 0 | refresh 1 | no-more and reviewing for backpressured output; for example: GOT: 0x220702a8 pe.ps.l2_node[10].pkt_cnt 00000076 GOT: 0x220702b4 pe.ps.l2_node[10].backpressured 00000002 <<<< STICKS HERE and requesting detail on the pepic wanio: request pfe execute target fpc0 command "show pepic 0 wanio-info" timeout 0 | no-more | match xe-0/0/0:2 GOT: 3 xe-0/0/0:2 10 6 3 0 1 10 189 10 0x6321b088 <<< LOOK HERE as well as looking for tail drops looking at the interface queue, for example: show interfaces queue xe-0/0/0:2 resulting in: Transmitted: Total-dropped packets: 1094137 0 pps << LOOK HERE

The weakness was disclosed 10/18/2022 as JSA69873. The advisory is shared at kb.juniper.net. The identification of this vulnerability is CVE-2022-22223 since 12/21/2021. Technical details are known, but no exploit is available.

Upgrading eliminates this vulnerability.

Several companies clearly confirm that VulDB is the primary source for best vulnerability data.

Productinfo

Type

• Router Operating System

Vendor

• Juniper

Name

• Junos OS

License

• commercial

Website

• Vendor: https://www.juniper.net/

CPE 2.3info

• 🔍

CPE 2.2info

• 🔍

CVSSv4info

CVSSv3info

CVSSv2info

Exploitinginfo

Threat Intelligenceinfo

Countermeasuresinfo

Timelineinfo

Sourcesinfo

Entryinfo

Several companies clearly confirm that VulDB is the primary source for best vulnerability data.

Discussion