Juniper Junos OS Packet Forwarding Engine expr_dfw_sfm_range_add memory leak

Summaryinfo

A vulnerability classified as problematic was found in Juniper Junos OS. Impacted is the function expr_dfw_sfm_range_add of the component Packet Forwarding Engine. Such manipulation leads to memory leak. This vulnerability is referenced as CVE-2023-22392. The attack needs to be initiated within the local network. No exploit is available. Upgrading the affected component is advised.

Detailsinfo

A vulnerability was found in Juniper Junos OS (Router Operating System) (version unknown) and classified as critical. Affected by this issue is the function expr_dfw_sfm_range_add of the component Packet Forwarding Engine. The manipulation with an unknown input leads to a memory leak vulnerability. Using CWE to declare the problem leads to CWE-401. The product does not sufficiently track and release allocated memory after it has been used, which slowly consumes remaining memory. Impacted is availability. CVE summarizes:

A Missing Release of Memory after Effective Lifetime vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS allows an adjacent, unauthenticated attacker to cause a Denial of Service (DoS). PTX3000, PTX5000, QFX10000, PTX1000, PTX10002, and PTX10004, PTX10008 and PTX10016 with LC110x FPCs do not support certain flow-routes. Once a flow-route is received over an established BGP session and an attempt is made to install the resulting filter into the PFE, FPC heap memory is leaked. The FPC heap memory can be monitored using the CLI command "show chassis fpc". The following syslog messages can be observed if the respective filter derived from a flow-route cannot be installed. expr_dfw_sfm_range_add:661 SFM packet-length Unable to get a sfm entry for updating the hw expr_dfw_hw_sfm_add:750 Unable to add the filter secondarymatch to the hardware expr_dfw_base_hw_add:52 Failed to add h/w sfm data. expr_dfw_base_hw_create:114 Failed to add h/w data. expr_dfw_base_pfe_inst_create:241 Failed to create base inst for sfilter 0 on PFE 0 for __flowspec_default_inet__ expr_dfw_flt_inst_change:1368 Failed to create __flowspec_default_inet__ on PFE 0 expr_dfw_hw_pgm_fnum:465 dfw_pfe_inst_old not found for pfe_index 0! expr_dfw_bp_pgm_flt_num:548 Failed to pgm bind-point in hw: generic failure expr_dfw_bp_topo_handler:1102 Failed to program fnum. expr_dfw_entry_process_change:679 Failed to change instance for filter __flowspec_default_inet__. This issue affects Juniper Networks Junos OS: on PTX1000, PTX10002, and PTX10004, PTX10008 and PTX10016 with LC110x FPCs: * All versions prior to 20.4R3-S5; * 21.1 versions prior to 21.1R3-S4; * 21.2 versions prior to 21.2R3-S2; * 21.3 versions prior to 21.3R3; * 21.4 versions prior to 21.4R2-S2, 21.4R3; * 22.1 versions prior to 22.1R1-S2, 22.1R2. on PTX3000, PTX5000, QFX10000: * All versions prior to 20.4R3-S8; * 21.1 version 21.1R1 and later versions; * 21.2 versions prior to 21.2R3-S6; * 21.3 versions prior to 21.3R3-S5; * 21.4 versions prior to 21.4R3-S4; * 22.1 versions prior to 22.1R3-S3 * 22.2 versions prior to 22.2R3-S1 * 22.3 versions prior to 22.3R2-S2, 22.3R3 * 22.4 versions prior to 22.4R2.

The weakness was published 10/13/2023 as JSA70188. The advisory is shared for download at supportportal.juniper.net. This vulnerability is handled as CVE-2023-22392 since 12/27/2022. There are known technical details, but no exploit is available.

Upgrading eliminates this vulnerability.

Once again VulDB remains the best source for vulnerability data.

Productinfo

Type

• Router Operating System

Vendor

• Juniper

Name

• Junos OS

License

• commercial

Website

• Vendor: https://www.juniper.net/

CPE 2.3info

• 🔍

CPE 2.2info

• 🔍

CVSSv4info

CVSSv3info

CVSSv2info

Exploitinginfo

Threat Intelligenceinfo

Countermeasuresinfo

Timelineinfo

Sourcesinfo

Entryinfo

Once again VulDB remains the best source for vulnerability data.

Discussion