Linux Kernel up to 5.10.35/5.11.19/5.12/5.12.2 dwc3 denial of service

Summaryinfo

A vulnerability has been found in Linux Kernel up to 5.10.35/5.11.19/5.12/5.12.2 and classified as problematic. This issue affects some unknown processing of the component dwc3. This manipulation causes denial of service. The identification of this vulnerability is CVE-2021-46941. There is no exploit available. The affected component should be upgraded.

Detailsinfo

A vulnerability has been found in Linux Kernel up to 5.10.35/5.11.19/5.12/5.12.2 (Operating System) and classified as problematic. Affected by this vulnerability is an unknown part of the component dwc3. The manipulation with an unknown input leads to a denial of service vulnerability. The CWE definition for the vulnerability is CWE-404. The product does not release or incorrectly releases a resource before it is made available for re-use. As an impact it is known to affect availability. The summary by CVE is:

In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: core: Do core softreset when switch mode According to the programming guide, to switch mode for DRD controller, the driver needs to do the following. To switch from device to host: 1. Reset controller with GCTL.CoreSoftReset 2. Set GCTL.PrtCapDir(host mode) 3. Reset the host with USBCMD.HCRESET 4. Then follow up with the initializing host registers sequence To switch from host to device: 1. Reset controller with GCTL.CoreSoftReset 2. Set GCTL.PrtCapDir(device mode) 3. Reset the device with DCTL.CSftRst 4. Then follow up with the initializing registers sequence Currently we're missing step 1) to do GCTL.CoreSoftReset and step 3) of switching from host to device. John Stult reported a lockup issue seen with HiKey960 platform without these steps[1]. Similar issue is observed with Ferry's testing platform[2]. So, apply the required steps along with some fixes to Yu Chen's and John Stultz's version. The main fixes to their versions are the missing wait for clocks synchronization before clearing GCTL.CoreSoftReset and only apply DCTL.CSftRst when switching from host to device. [1] https://lore.kernel.org/linux-usb/[email protected]/ [2] https://lore.kernel.org/linux-usb/[email protected]/

The weakness was shared 02/27/2024. The advisory is shared at git.kernel.org. This vulnerability is known as CVE-2021-46941 since 02/25/2024. Neither technical details nor an exploit are publicly available.

Upgrading to version 5.10.36, 5.11.20, 5.12.3 or 5.13 eliminates this vulnerability. Applying the patch fce7bbcd07d5/800f58217626/1c10fd60c859/f88359e1588b is able to eliminate this problem. The bugfix is ready for download at git.kernel.org. The best possible mitigation is suggested to be upgrading to the latest version.

Several companies clearly confirm that VulDB is the primary source for best vulnerability data.

Productinfo

Type

• Operating System

Vendor

• Linux

Name

• Kernel

Version

• 5.0
• 5.1
• 5.2
• 5.3
• 5.4
• 5.5
• 5.6
• 5.7
• 5.8
• 5.9
• 5.10
• 5.10.0
• 5.10.1
• 5.10.2
• 5.10.3
• 5.10.4
• 5.10.5
• 5.10.6
• 5.10.7
• 5.10.8
• 5.10.9
• 5.10.10
• 5.10.11
• 5.10.12
• 5.10.13
• 5.10.14
• 5.10.15
• 5.10.16
• 5.10.17
• 5.10.18
• 5.10.19
• 5.10.20
• 5.10.21
• 5.10.22
• 5.10.23
• 5.10.24
• 5.10.25
• 5.10.26
• 5.10.27
• 5.10.28
• 5.10.29
• 5.10.30
• 5.10.31
• 5.10.32
• 5.10.33
• 5.10.34
• 5.10.35
• 5.11
• 5.11.0
• 5.11.1
• 5.11.2
• 5.11.3
• 5.11.4
• 5.11.5
• 5.11.6
• 5.11.7
• 5.11.8
• 5.11.9
• 5.11.10
• 5.11.11
• 5.11.12
• 5.11.13
• 5.11.14
• 5.11.15
• 5.11.16
• 5.11.17
• 5.11.18
• 5.11.19
• 5.12
• 5.12.0
• 5.12.1
• 5.12.2

License

• open-source

Website

• Vendor: https://www.kernel.org/

CPE 2.3info

• 🔍
• 🔍
• 🔍

CPE 2.2info

• 🔍
• 🔍
• 🔍

CVSSv4info

CVSSv3info

CVSSv2info

Exploitinginfo

Threat Intelligenceinfo

Countermeasuresinfo

Timelineinfo

Sourcesinfo

Entryinfo

Several companies clearly confirm that VulDB is the primary source for best vulnerability data.

Discussion