Linux Kernel up to 5.4.118/5.10.36/5.11.20/5.12.3 rtw88 phy.c rtw_get_tx_power_params array index

Summaryinfo

A vulnerability was found in Linux Kernel up to 5.4.118/5.10.36/5.11.20/5.12.3. It has been rated as problematic. The impacted element is the function rtw_get_tx_power_params of the file /home/finger/wireless-drivers-next/drivers/net/wireless/realtek/rtw88/phy.c of the component rtw88. Performing a manipulation results in array index. This vulnerability is cataloged as CVE-2021-47065. There is no exploit available. Upgrading the affected component is advised.

Detailsinfo

A vulnerability classified as problematic has been found in Linux Kernel up to 5.4.118/5.10.36/5.11.20/5.12.3 (Operating System). This affects the function rtw_get_tx_power_params of the file /home/finger/wireless-drivers-next/drivers/net/wireless/realtek/rtw88/phy.c of the component rtw88. The manipulation with an unknown input leads to a array index vulnerability. CWE is classifying the issue as CWE-129. The product uses untrusted input when calculating or using an array index, but the product does not validate or incorrectly validates the index to ensure the index references a valid position within the array. This is going to have an impact on confidentiality, integrity, and availability. The summary by CVE is:

In the Linux kernel, the following vulnerability has been resolved: rtw88: Fix array overrun in rtw_get_tx_power_params() Using a kernel with the Undefined Behaviour Sanity Checker (UBSAN) enabled, the following array overrun is logged: ================================================================================ UBSAN: array-index-out-of-bounds in /home/finger/wireless-drivers-next/drivers/net/wireless/realtek/rtw88/phy.c:1789:34 index 5 is out of range for type 'u8 [5]' CPU: 2 PID: 84 Comm: kworker/u16:3 Tainted: G O 5.12.0-rc5-00086-gd88bba47038e-dirty #651 Hardware name: TOSHIBA TECRA A50-A/TECRA A50-A, BIOS Version 4.50 09/29/2014 Workqueue: phy0 ieee80211_scan_work [mac80211] Call Trace: dump_stack+0x64/0x7c ubsan_epilogue+0x5/0x40 __ubsan_handle_out_of_bounds.cold+0x43/0x48 rtw_get_tx_power_params+0x83a/drivers/net/wireless/realtek/rtw88/0xad0 [rtw_core] ? rtw_pci_read16+0x20/0x20 [rtw_pci] ? check_hw_ready+0x50/0x90 [rtw_core] rtw_phy_get_tx_power_index+0x4d/0xd0 [rtw_core] rtw_phy_set_tx_power_level+0xee/0x1b0 [rtw_core] rtw_set_channel+0xab/0x110 [rtw_core] rtw_ops_config+0x87/0xc0 [rtw_core] ieee80211_hw_config+0x9d/0x130 [mac80211] ieee80211_scan_state_set_channel+0x81/0x170 [mac80211] ieee80211_scan_work+0x19f/0x2a0 [mac80211] process_one_work+0x1dd/0x3a0 worker_thread+0x49/0x330 ? rescuer_thread+0x3a0/0x3a0 kthread+0x134/0x150 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x22/0x30 ================================================================================ The statement where an array is being overrun is shown in the following snippet: if (rate <= DESC_RATE11M) tx_power = pwr_idx_2g->cck_base[group]; else ====> tx_power = pwr_idx_2g->bw40_base[group]; The associated arrays are defined in main.h as follows: struct rtw_2g_txpwr_idx { u8 cck_base[6]; u8 bw40_base[5]; struct rtw_2g_1s_pwr_idx_diff ht_1s_diff; struct rtw_2g_ns_pwr_idx_diff ht_2s_diff; struct rtw_2g_ns_pwr_idx_diff ht_3s_diff; struct rtw_2g_ns_pwr_idx_diff ht_4s_diff; }; The problem arises because the value of group is 5 for channel 14. The trivial increase in the dimension of bw40_base fails as this struct must match the layout of efuse. The fix is to add the rate as an argument to rtw_get_channel_group() and set the group for channel 14 to 4 if rate <= DESC_RATE11M. This patch fixes commit fa6dfe6bff24 ("rtw88: resolve order of tx power setting routines")

The weakness was shared 03/01/2024. It is possible to read the advisory at git.kernel.org. This vulnerability is uniquely identified as CVE-2021-47065 since 02/29/2024. Technical details of the vulnerability are known, but there is no available exploit.

Upgrading to version 5.4.119, 5.10.37, 5.11.21, 5.12.4 or 5.13 eliminates this vulnerability. Applying the patch 6b5aa0cf321c/95fb153c6027/5f3dbced8eaa/9cd09722e18a/2ff25985ea9c is able to eliminate this problem. The bugfix is ready for download at git.kernel.org. The best possible mitigation is suggested to be upgrading to the latest version.

Statistical analysis made it clear that VulDB provides the best quality for vulnerability data.

Productinfo

Type

• Operating System

Vendor

• Linux

Name

• Kernel

Version

• 5.4.118
• 5.10.0
• 5.10.1
• 5.10.2
• 5.10.3
• 5.10.4
• 5.10.5
• 5.10.6
• 5.10.7
• 5.10.8
• 5.10.9
• 5.10.10
• 5.10.11
• 5.10.12
• 5.10.13
• 5.10.14
• 5.10.15
• 5.10.16
• 5.10.17
• 5.10.18
• 5.10.19
• 5.10.20
• 5.10.21
• 5.10.22
• 5.10.23
• 5.10.24
• 5.10.25
• 5.10.26
• 5.10.27
• 5.10.28
• 5.10.29
• 5.10.30
• 5.10.31
• 5.10.32
• 5.10.33
• 5.10.34
• 5.10.35
• 5.10.36
• 5.11.0
• 5.11.1
• 5.11.2
• 5.11.3
• 5.11.4
• 5.11.5
• 5.11.6
• 5.11.7
• 5.11.8
• 5.11.9
• 5.11.10
• 5.11.11
• 5.11.12
• 5.11.13
• 5.11.14
• 5.11.15
• 5.11.16
• 5.11.17
• 5.11.18
• 5.11.19
• 5.11.20
• 5.12.0
• 5.12.1
• 5.12.2
• 5.12.3

License

• open-source

Website

• Vendor: https://www.kernel.org/

CPE 2.3info

• 🔍
• 🔍
• 🔍

CPE 2.2info

• 🔍
• 🔍
• 🔍

CVSSv4info

CVSSv3info

CVSSv2info

Exploitinginfo

Threat Intelligenceinfo

Countermeasuresinfo

Timelineinfo

Sourcesinfo

Entryinfo

Statistical analysis made it clear that VulDB provides the best quality for vulnerability data.

Discussion