Linux Kernel up to 5.4.168/5.10.88/5.15.11 Input elantech_change_report_id param[] out-of-bounds

Summaryinfo

A vulnerability was found in Linux Kernel up to 5.4.168/5.10.88/5.15.11. It has been classified as problematic. The affected element is the function elantech_change_report_id of the component Input. The manipulation of the argument param[] leads to out-of-bounds. This vulnerability is documented as CVE-2021-47097. The attack requires being on the local network. There is not any exploit available. Upgrading the affected component is recommended.

Detailsinfo

A vulnerability, which was classified as problematic, has been found in Linux Kernel up to 5.4.168/5.10.88/5.15.11 (Operating System). This issue affects the function elantech_change_report_id of the component Input. The manipulation of the argument param[] with an unknown input leads to a out-of-bounds vulnerability. Using CWE to declare the problem leads to CWE-125. The product reads data past the end, or before the beginning, of the intended buffer. Impacted is confidentiality. The summary by CVE is:

In the Linux kernel, the following vulnerability has been resolved: Input: elantech - fix stack out of bound access in elantech_change_report_id() The array param[] in elantech_change_report_id() must be at least 3 bytes, because elantech_read_reg_params() is calling ps2_command() with PSMOUSE_CMD_GETINFO, that is going to access 3 bytes from param[], but it's defined in the stack as an array of 2 bytes, therefore we have a potential stack out-of-bounds access here, also confirmed by KASAN: [ 6.512374] BUG: KASAN: stack-out-of-bounds in __ps2_command+0x372/0x7e0 [ 6.512397] Read of size 1 at addr ffff8881024d77c2 by task kworker/2:1/118 [ 6.512416] CPU: 2 PID: 118 Comm: kworker/2:1 Not tainted 5.13.0-22-generic #22+arighi20211110 [ 6.512428] Hardware name: LENOVO 20T8000QGE/20T8000QGE, BIOS R1AET32W (1.08 ) 08/14/2020 [ 6.512436] Workqueue: events_long serio_handle_event [ 6.512453] Call Trace: [ 6.512462] show_stack+0x52/0x58 [ 6.512474] dump_stack+0xa1/0xd3 [ 6.512487] print_address_description.constprop.0+0x1d/0x140 [ 6.512502] ? __ps2_command+0x372/0x7e0 [ 6.512516] __kasan_report.cold+0x7d/0x112 [ 6.512527] ? _raw_write_lock_irq+0x20/0xd0 [ 6.512539] ? __ps2_command+0x372/0x7e0 [ 6.512552] kasan_report+0x3c/0x50 [ 6.512564] __asan_load1+0x6a/0x70 [ 6.512575] __ps2_command+0x372/0x7e0 [ 6.512589] ? ps2_drain+0x240/0x240 [ 6.512601] ? dev_printk_emit+0xa2/0xd3 [ 6.512612] ? dev_vprintk_emit+0xc5/0xc5 [ 6.512621] ? __kasan_check_write+0x14/0x20 [ 6.512634] ? mutex_lock+0x8f/0xe0 [ 6.512643] ? __mutex_lock_slowpath+0x20/0x20 [ 6.512655] ps2_command+0x52/0x90 [ 6.512670] elantech_ps2_command+0x4f/0xc0 [psmouse] [ 6.512734] elantech_change_report_id+0x1e6/0x256 [psmouse] [ 6.512799] ? elantech_report_trackpoint.constprop.0.cold+0xd/0xd [psmouse] [ 6.512863] ? ps2_command+0x7f/0x90 [ 6.512877] elantech_query_info.cold+0x6bd/0x9ed [psmouse] [ 6.512943] ? elantech_setup_ps2+0x460/0x460 [psmouse] [ 6.513005] ? psmouse_reset+0x69/0xb0 [psmouse] [ 6.513064] ? psmouse_attr_set_helper+0x2a0/0x2a0 [psmouse] [ 6.513122] ? phys_pmd_init+0x30e/0x521 [ 6.513137] elantech_init+0x8a/0x200 [psmouse] [ 6.513200] ? elantech_init_ps2+0xf0/0xf0 [psmouse] [ 6.513249] ? elantech_query_info+0x440/0x440 [psmouse] [ 6.513296] ? synaptics_send_cmd+0x60/0x60 [psmouse] [ 6.513342] ? elantech_query_info+0x440/0x440 [psmouse] [ 6.513388] ? psmouse_try_protocol+0x11e/0x170 [psmouse] [ 6.513432] psmouse_extensions+0x65d/0x6e0 [psmouse] [ 6.513476] ? psmouse_try_protocol+0x170/0x170 [psmouse] [ 6.513519] ? mutex_unlock+0x22/0x40 [ 6.513526] ? ps2_command+0x7f/0x90 [ 6.513536] ? psmouse_probe+0xa3/0xf0 [psmouse] [ 6.513580] psmouse_switch_protocol+0x27d/0x2e0 [psmouse] [ 6.513624] psmouse_connect+0x272/0x530 [psmouse] [ 6.513669] serio_driver_probe+0x55/0x70 [ 6.513679] really_probe+0x190/0x720 [ 6.513689] driver_probe_device+0x160/0x1f0 [ 6.513697] device_driver_attach+0x119/0x130 [ 6.513705] ? device_driver_attach+0x130/0x130 [ 6.513713] __driver_attach+0xe7/0x1a0 [ 6.513720] ? device_driver_attach+0x130/0x130 [ 6.513728] bus_for_each_dev+0xfb/0x150 [ 6.513738] ? subsys_dev_iter_exit+0x10/0x10 [ 6.513748] ? _raw_write_unlock_bh+0x30/0x30 [ 6.513757] driver_attach+0x2d/0x40 [ 6.513764] serio_handle_event+0x199/0x3d0 [ 6.513775] process_one_work+0x471/0x740 [ 6.513785] worker_thread+0x2d2/0x790 [ 6.513794] ? process_one_work+0x740/0x740 [ 6.513802] kthread+0x1b4/0x1e0 [ 6.513809] ? set_kthread_struct+0x80/0x80 [ 6.513816] ret_from_fork+0x22/0x30 [ 6.513832] The buggy address belongs to the page: [ 6.513838] page:00000000bc35e189 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1024d7 [ 6.513847] flags: 0x17ffffc0000000(node=0|zone=2|lastcpupid=0x1fffff) [ 6.513860] raw: 0 ---truncated---

The weakness was released 03/04/2024. The advisory is shared at git.kernel.org. The identification of this vulnerability is CVE-2021-47097 since 02/29/2024. Technical details are known, but no exploit is available.

The vulnerability scanner Nessus provides a plugin with the ID 207773 (Oracle Linux 8 : kernel (ELSA-2024-7000)), which helps to determine the existence of the flaw in a target environment.

Upgrading to version 5.4.169, 5.10.89, 5.15.12 or 5.16 eliminates this vulnerability. Applying the patch a7f95328c6f0/676c572439e5/dfd5b60b5342/1d72d9f960cc is able to eliminate this problem. The bugfix is ready for download at git.kernel.org. The best possible mitigation is suggested to be upgrading to the latest version.

The vulnerability is also documented in the vulnerability database at Tenable (207773). If you want to get the best quality for vulnerability data then you always have to consider VulDB.

Productinfo

Type

• Operating System

Vendor

• Linux

Name

• Kernel

Version

• 5.4.168
• 5.10.0
• 5.10.1
• 5.10.2
• 5.10.3
• 5.10.4
• 5.10.5
• 5.10.6
• 5.10.7
• 5.10.8
• 5.10.9
• 5.10.10
• 5.10.11
• 5.10.12
• 5.10.13
• 5.10.14
• 5.10.15
• 5.10.16
• 5.10.17
• 5.10.18
• 5.10.19
• 5.10.20
• 5.10.21
• 5.10.22
• 5.10.23
• 5.10.24
• 5.10.25
• 5.10.26
• 5.10.27
• 5.10.28
• 5.10.29
• 5.10.30
• 5.10.31
• 5.10.32
• 5.10.33
• 5.10.34
• 5.10.35
• 5.10.36
• 5.10.37
• 5.10.38
• 5.10.39
• 5.10.40
• 5.10.41
• 5.10.42
• 5.10.43
• 5.10.44
• 5.10.45
• 5.10.46
• 5.10.47
• 5.10.48
• 5.10.49
• 5.10.50
• 5.10.51
• 5.10.52
• 5.10.53
• 5.10.54
• 5.10.55
• 5.10.56
• 5.10.57
• 5.10.58
• 5.10.59
• 5.10.60
• 5.10.61
• 5.10.62
• 5.10.63
• 5.10.64
• 5.10.65
• 5.10.66
• 5.10.67
• 5.10.68
• 5.10.69
• 5.10.70
• 5.10.71
• 5.10.72
• 5.10.73
• 5.10.74
• 5.10.75
• 5.10.76
• 5.10.77
• 5.10.78
• 5.10.79
• 5.10.80
• 5.10.81
• 5.10.82
• 5.10.83
• 5.10.84
• 5.10.85
• 5.10.86
• 5.10.87
• 5.10.88
• 5.15.0
• 5.15.1
• 5.15.2
• 5.15.3
• 5.15.4
• 5.15.5
• 5.15.6
• 5.15.7
• 5.15.8
• 5.15.9
• 5.15.10
• 5.15.11

License

• open-source

Website

• Vendor: https://www.kernel.org/

CPE 2.3info

• 🔍
• 🔍
• 🔍

CPE 2.2info

• 🔍
• 🔍
• 🔍

CVSSv4info

CVSSv3info

CVSSv2info

Exploitinginfo

Threat Intelligenceinfo

Countermeasuresinfo

Timelineinfo

Sourcesinfo

Entryinfo

If you want to get the best quality for vulnerability data then you always have to consider VulDB.

Discussion