Linux Kernel up to 5.10.41/5.12.8 lib/cpu_rmap.c register_netdev uninitialized pointer

Summaryinfo

A vulnerability marked as problematic has been reported in Linux Kernel up to 5.10.41/5.12.8. This vulnerability affects the function register_netdev in the library lib/cpu_rmap.c. This manipulation causes uninitialized pointer. This vulnerability is handled as CVE-2021-47139. There is not any exploit available. It is suggested to upgrade the affected component.

Detailsinfo

A vulnerability was found in Linux Kernel up to 5.10.41/5.12.8. It has been declared as problematic. Affected by this vulnerability is the function register_netdev in the library lib/cpu_rmap.c. The manipulation with an unknown input leads to a uninitialized pointer vulnerability. The CWE definition for the vulnerability is CWE-824. The product accesses or uses a pointer that has not been initialized. As an impact it is known to affect availability. The summary by CVE is:

In the Linux kernel, the following vulnerability has been resolved: net: hns3: put off calling register_netdev() until client initialize complete Currently, the netdevice is registered before client initializing complete. So there is a timewindow between netdevice available and usable. In this case, if user try to change the channel number or ring param, it may cause the hns3_set_rx_cpu_rmap() being called twice, and report bug. [47199.416502] hns3 0000:35:00.0 eth1: set channels: tqp_num=1, rxfh=0 [47199.430340] hns3 0000:35:00.0 eth1: already uninitialized [47199.438554] hns3 0000:35:00.0: rss changes from 4 to 1 [47199.511854] hns3 0000:35:00.0: Channels changed, rss_size from 4 to 1, tqps from 4 to 1 [47200.163524] ------------[ cut here ]------------ [47200.171674] kernel BUG at lib/cpu_rmap.c:142! [47200.177847] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [47200.185259] Modules linked in: hclge(+) hns3(-) hns3_cae(O) hns_roce_hw_v2 hnae3 vfio_iommu_type1 vfio_pci vfio_virqfd vfio pv680_mii(O) [last unloaded: hclge] [47200.205912] CPU: 1 PID: 8260 Comm: ethtool Tainted: G O 5.11.0-rc3+ #1 [47200.215601] Hardware name: , xxxxxx 02/04/2021 [47200.223052] pstate: 60400009 (nZCv daif +PAN -UAO -TCO BTYPE=--) [47200.230188] pc : cpu_rmap_add+0x38/0x40 [47200.237472] lr : irq_cpu_rmap_add+0x84/0x140 [47200.243291] sp : ffff800010e93a30 [47200.247295] x29: ffff800010e93a30 x28: ffff082100584880 [47200.254155] x27: 0000000000000000 x26: 0000000000000000 [47200.260712] x25: 0000000000000000 x24: 0000000000000004 [47200.267241] x23: ffff08209ba03000 x22: ffff08209ba038c0 [47200.273789] x21: 000000000000003f x20: ffff0820e2bc1680 [47200.280400] x19: ffff0820c970ec80 x18: 00000000000000c0 [47200.286944] x17: 0000000000000000 x16: ffffb43debe4a0d0 [47200.293456] x15: fffffc2082990600 x14: dead000000000122 [47200.300059] x13: ffffffffffffffff x12: 000000000000003e [47200.306606] x11: ffff0820815b8080 x10: ffff53e411988000 [47200.313171] x9 : 0000000000000000 x8 : ffff0820e2bc1700 [47200.319682] x7 : 0000000000000000 x6 : 000000000000003f [47200.326170] x5 : 0000000000000040 x4 : ffff800010e93a20 [47200.332656] x3 : 0000000000000004 x2 : ffff0820c970ec80 [47200.339168] x1 : ffff0820e2bc1680 x0 : 0000000000000004 [47200.346058] Call trace: [47200.349324] cpu_rmap_add+0x38/0x40 [47200.354300] hns3_set_rx_cpu_rmap+0x6c/0xe0 [hns3] [47200.362294] hns3_reset_notify_init_enet+0x1cc/0x340 [hns3] [47200.370049] hns3_change_channels+0x40/0xb0 [hns3] [47200.376770] hns3_set_channels+0x12c/0x2a0 [hns3] [47200.383353] ethtool_set_channels+0x140/0x250 [47200.389772] dev_ethtool+0x714/0x23d0 [47200.394440] dev_ioctl+0x4cc/0x640 [47200.399277] sock_do_ioctl+0x100/0x2a0 [47200.404574] sock_ioctl+0x28c/0x470 [47200.409079] __arm64_sys_ioctl+0xb4/0x100 [47200.415217] el0_svc_common.constprop.0+0x84/0x210 [47200.422088] do_el0_svc+0x28/0x34 [47200.426387] el0_svc+0x28/0x70 [47200.431308] el0_sync_handler+0x1a4/0x1b0 [47200.436477] el0_sync+0x174/0x180 [47200.441562] Code: 11000405 79000c45 f8247861 d65f03c0 (d4210000) [47200.448869] ---[ end trace a01efe4ce42e5f34 ]--- The process is like below: excuting hns3_client_init | register_netdev() | hns3_set_channels() | | hns3_set_rx_cpu_rmap() hns3_reset_notify_uninit_enet() | | | quit without calling function | hns3_free_rx_cpu_rmap for flag | HNS3_NIC_STATE_INITED is unset. | | | hns3_reset_notify_init_enet() | | set HNS3_NIC_STATE_INITED call hns3_set_rx_cpu_rmap()-- crash Fix it by calling register_netdev() at the end of function hns3_client_init().

The advisory is shared at git.kernel.org. This vulnerability is known as CVE-2021-47139 since 03/04/2024. The exploitation appears to be difficult. Technical details are known, but no exploit is available.

Upgrading to version 5.10.42, 5.12.9 or 5.13 eliminates this vulnerability. Applying the patch a663c1e418a3/0921a0620b50/a289a7e5c1d4 is able to eliminate this problem. The bugfix is ready for download at git.kernel.org. The best possible mitigation is suggested to be upgrading to the latest version.

The vulnerability is also documented in the vulnerability database at CERT Bund (WID-SEC-2024-0699). If you want to get the best quality for vulnerability data then you always have to consider VulDB.

Affected

• Amazon Linux 2
• Red Hat Enterprise Linux
• Ubuntu Linux
• SUSE Linux
• Oracle Linux
• EMC Avamar
• Dell NetWorker
• Open Source Linux Kernel
• IBM Spectrum Protect Plus

Productinfo

Type

• Operating System

Vendor

• Linux

Name

• Kernel

Version

• 5.10.0
• 5.10.1
• 5.10.2
• 5.10.3
• 5.10.4
• 5.10.5
• 5.10.6
• 5.10.7
• 5.10.8
• 5.10.9
• 5.10.10
• 5.10.11
• 5.10.12
• 5.10.13
• 5.10.14
• 5.10.15
• 5.10.16
• 5.10.17
• 5.10.18
• 5.10.19
• 5.10.20
• 5.10.21
• 5.10.22
• 5.10.23
• 5.10.24
• 5.10.25
• 5.10.26
• 5.10.27
• 5.10.28
• 5.10.29
• 5.10.30
• 5.10.31
• 5.10.32
• 5.10.33
• 5.10.34
• 5.10.35
• 5.10.36
• 5.10.37
• 5.10.38
• 5.10.39
• 5.10.40
• 5.10.41
• 5.12.0
• 5.12.1
• 5.12.2
• 5.12.3
• 5.12.4
• 5.12.5
• 5.12.6
• 5.12.7
• 5.12.8

License

• open-source

Website

• Vendor: https://www.kernel.org/

CPE 2.3info

• 🔍
• 🔍
• 🔍

CPE 2.2info

• 🔍
• 🔍
• 🔍

CVSSv4info

CVSSv3info

CVSSv2info

Exploitinginfo

Threat Intelligenceinfo

Countermeasuresinfo

Timelineinfo

Sourcesinfo

Entryinfo

If you want to get the best quality for vulnerability data then you always have to consider VulDB.

Discussion