Linux Kernel up to 6.7.3 Virtual Address cancel_delayed_work_sync buffer overflow

Summaryinfo

A vulnerability described as critical has been identified in Linux Kernel up to 5.10.209/5.15.148/6.1.76/6.6.15/6.7.3. This affects the function cancel_delayed_work_sync of the component Virtual Address Handler. Executing a manipulation can lead to buffer overflow. This vulnerability is registered as CVE-2023-52635. No exploit is available. Upgrading the affected component is recommended.

Detailsinfo

A vulnerability has been found in Linux Kernel up to 5.10.209/5.15.148/6.1.76/6.6.15/6.7.3 and classified as critical. This vulnerability affects the function cancel_delayed_work_sync of the component Virtual Address Handler. The manipulation with an unknown input leads to a buffer overflow vulnerability. The CWE definition for the vulnerability is CWE-120. The product copies an input buffer to an output buffer without verifying that the size of the input buffer is less than the size of the output buffer, leading to a buffer overflow. As an impact it is known to affect confidentiality, integrity, and availability. CVE summarizes:

In the Linux kernel, the following vulnerability has been resolved: PM / devfreq: Synchronize devfreq_monitor_[start/stop] There is a chance if a frequent switch of the governor done in a loop result in timer list corruption where timer cancel being done from two place one from cancel_delayed_work_sync() and followed by expire_timers() can be seen from the traces[1]. while true do echo "simple_ondemand" > /sys/class/devfreq/1d84000.ufshc/governor echo "performance" > /sys/class/devfreq/1d84000.ufshc/governor done It looks to be issue with devfreq driver where device_monitor_[start/stop] need to synchronized so that delayed work should get corrupted while it is either being queued or running or being cancelled. Let's use polling flag and devfreq lock to synchronize the queueing the timer instance twice and work data being corrupted. [1] ... .. -0 [003] 9436.209662: timer_cancel timer=0xffffff80444f0428 -0 [003] 9436.209664: timer_expire_entry timer=0xffffff80444f0428 now=0x10022da1c function=__typeid__ZTSFvP10timer_listE_global_addr baseclk=0x10022da1c -0 [003] 9436.209718: timer_expire_exit timer=0xffffff80444f0428 kworker/u16:6-14217 [003] 9436.209863: timer_start timer=0xffffff80444f0428 function=__typeid__ZTSFvP10timer_listE_global_addr expires=0x10022da2b now=0x10022da1c flags=182452227 vendor.xxxyyy.ha-1593 [004] 9436.209888: timer_cancel timer=0xffffff80444f0428 vendor.xxxyyy.ha-1593 [004] 9436.216390: timer_init timer=0xffffff80444f0428 vendor.xxxyyy.ha-1593 [004] 9436.216392: timer_start timer=0xffffff80444f0428 function=__typeid__ZTSFvP10timer_listE_global_addr expires=0x10022da2c now=0x10022da1d flags=186646532 vendor.xxxyyy.ha-1593 [005] 9436.220992: timer_cancel timer=0xffffff80444f0428 xxxyyyTraceManag-7795 [004] 9436.261641: timer_cancel timer=0xffffff80444f0428 [2] 9436.261653][ C4] Unable to handle kernel paging request at virtual address dead00000000012a [ 9436.261664][ C4] Mem abort info: [ 9436.261666][ C4] ESR = 0x96000044 [ 9436.261669][ C4] EC = 0x25: DABT (current EL), IL = 32 bits [ 9436.261671][ C4] SET = 0, FnV = 0 [ 9436.261673][ C4] EA = 0, S1PTW = 0 [ 9436.261675][ C4] Data abort info: [ 9436.261677][ C4] ISV = 0, ISS = 0x00000044 [ 9436.261680][ C4] CM = 0, WnR = 1 [ 9436.261682][ C4] [dead00000000012a] address between user and kernel address ranges [ 9436.261685][ C4] Internal error: Oops: 96000044 [#1] PREEMPT SMP [ 9436.261701][ C4] Skip md ftrace buffer dump for: 0x3a982d0 ... [ 9436.262138][ C4] CPU: 4 PID: 7795 Comm: TraceManag Tainted: G S W O 5.10.149-android12-9-o-g17f915d29d0c #1 [ 9436.262141][ C4] Hardware name: Qualcomm Technologies, Inc. (DT) [ 9436.262144][ C4] pstate: 22400085 (nzCv daIf +PAN -UAO +TCO BTYPE=--) [ 9436.262161][ C4] pc : expire_timers+0x9c/0x438 [ 9436.262164][ C4] lr : expire_timers+0x2a4/0x438 [ 9436.262168][ C4] sp : ffffffc010023dd0 [ 9436.262171][ C4] x29: ffffffc010023df0 x28: ffffffd0636fdc18 [ 9436.262178][ C4] x27: ffffffd063569dd0 x26: ffffffd063536008 [ 9436.262182][ C4] x25: 0000000000000001 x24: ffffff88f7c69280 [ 9436.262185][ C4] x23: 00000000000000e0 x22: dead000000000122 [ 9436.262188][ C4] x21: 000000010022da29 x20: ffffff8af72b4e80 [ 9436.262191][ C4] x19: ffffffc010023e50 x18: ffffffc010025038 [ 9436.262195][ C4] x17: 0000000000000240 x16: 0000000000000201 [ 9436.262199][ C4] x15: ffffffffffffffff x14: ffffff889f3c3100 [ 9436.262203][ C4] x13: ffffff889f3c3100 x12: 00000000049f56b8 [ 9436.262207][ C4] x11: 00000000049f56b8 x10: 00000000ffffffff [ 9436.262212][ C4] x9 : ffffffc010023e50 x8 : dead000000000122 [ 9436.262216][ C4] x7 : ffffffffffffffff x6 : ffffffc0100239d8 [ 9436.262220][ C4] x5 : 0000000000000000 x4 : 0000000000000101 [ 9436.262223][ C4] x3 : 0000000000000080 x2 : ffffff8 ---truncated---

The advisory is available at git.kernel.org. This vulnerability was named CVE-2023-52635 since 03/06/2024. The exploitation appears to be easy. Technical details are known, but there is no available exploit.

The vulnerability scanner Nessus provides a plugin with the ID 210815 (RHEL 9 : kernel (RHSA-2024:9315)), which helps to determine the existence of the flaw in a target environment.

Upgrading to version 5.10.210, 5.15.149, 6.1.77, 6.6.16, 6.7.4 or 6.8 eliminates this vulnerability. Applying the patch 3399cc7013e7/099f6a9edbe3/31569995fc65/0aedb319ef3e/ae815e2fdc28/aed5ed595960 is able to eliminate this problem. The bugfix is ready for download at git.kernel.org. The best possible mitigation is suggested to be upgrading to the latest version.

The vulnerability is also documented in the vulnerability database at Tenable (210815). If you want to get best quality of vulnerability data, you may have to visit VulDB.

Productinfo

Type

• Operating System

Vendor

• Linux

Name

• Kernel

Version

• 5.10.209
• 5.15.148
• 6.1.0
• 6.1.1
• 6.1.2
• 6.1.3
• 6.1.4
• 6.1.5
• 6.1.6
• 6.1.7
• 6.1.8
• 6.1.9
• 6.1.10
• 6.1.11
• 6.1.12
• 6.1.13
• 6.1.14
• 6.1.15
• 6.1.16
• 6.1.17
• 6.1.18
• 6.1.19
• 6.1.20
• 6.1.21
• 6.1.22
• 6.1.23
• 6.1.24
• 6.1.25
• 6.1.26
• 6.1.27
• 6.1.28
• 6.1.29
• 6.1.30
• 6.1.31
• 6.1.32
• 6.1.33
• 6.1.34
• 6.1.35
• 6.1.36
• 6.1.37
• 6.1.38
• 6.1.39
• 6.1.40
• 6.1.41
• 6.1.42
• 6.1.43
• 6.1.44
• 6.1.45
• 6.1.46
• 6.1.47
• 6.1.48
• 6.1.49
• 6.1.50
• 6.1.51
• 6.1.52
• 6.1.53
• 6.1.54
• 6.1.55
• 6.1.56
• 6.1.57
• 6.1.58
• 6.1.59
• 6.1.60
• 6.1.61
• 6.1.62
• 6.1.63
• 6.1.64
• 6.1.65
• 6.1.66
• 6.1.67
• 6.1.68
• 6.1.69
• 6.1.70
• 6.1.71
• 6.1.72
• 6.1.73
• 6.1.74
• 6.1.75
• 6.1.76
• 6.6.0
• 6.6.1
• 6.6.2
• 6.6.3
• 6.6.4
• 6.6.5
• 6.6.6
• 6.6.7
• 6.6.8
• 6.6.9
• 6.6.10
• 6.6.11
• 6.6.12
• 6.6.13
• 6.6.14
• 6.6.15
• 6.7.0
• 6.7.1
• 6.7.2
• 6.7.3

License

• open-source

Website

• Vendor: https://www.kernel.org/

CPE 2.3info

• 🔍
• 🔍
• 🔍

CPE 2.2info

• 🔍
• 🔍
• 🔍

CVSSv4info

CVSSv3info

CVSSv2info

Exploitinginfo

Threat Intelligenceinfo

Countermeasuresinfo

Timelineinfo

Sourcesinfo

Entryinfo

If you want to get best quality of vulnerability data, you may have to visit VulDB.

Discussion