Linux Kernel up to 5.15.153/6.1.84/6.6.25/6.8.4 mlxbf_gige shutdown null pointer dereference

Summaryinfo

A vulnerability marked as critical has been reported in Linux Kernel up to 5.15.153/6.1.84/6.6.25/6.8.4. This issue affects the function shutdown of the component mlxbf_gige. The manipulation leads to null pointer dereference. This vulnerability is referenced as CVE-2024-35885. No exploit is available. It is suggested to upgrade the affected component.

Detailsinfo

A vulnerability, which was classified as critical, has been found in Linux Kernel up to 5.15.153/6.1.84/6.6.25/6.8.4. This issue affects the function shutdown of the component mlxbf_gige. The manipulation with an unknown input leads to a null pointer dereference vulnerability. Using CWE to declare the problem leads to CWE-476. A NULL pointer dereference occurs when the application dereferences a pointer that it expects to be valid, but is NULL, typically causing a crash or exit. Impacted is availability. The summary by CVE is:

In the Linux kernel, the following vulnerability has been resolved: mlxbf_gige: stop interface during shutdown The mlxbf_gige driver intermittantly encounters a NULL pointer exception while the system is shutting down via "reboot" command. The mlxbf_driver will experience an exception right after executing its shutdown() method. One example of this exception is: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000070 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=000000011d373000 [0000000000000070] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 96000004 [#1] SMP CPU: 0 PID: 13 Comm: ksoftirqd/0 Tainted: G S OE 5.15.0-bf.6.gef6992a #1 Hardware name: https://www.mellanox.com BlueField SoC/BlueField SoC, BIOS 4.0.2.12669 Apr 21 2023 pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mlxbf_gige_handle_tx_complete+0xc8/0x170 [mlxbf_gige] lr : mlxbf_gige_poll+0x54/0x160 [mlxbf_gige] sp : ffff8000080d3c10 x29: ffff8000080d3c10 x28: ffffcce72cbb7000 x27: ffff8000080d3d58 x26: ffff0000814e7340 x25: ffff331cd1a05000 x24: ffffcce72c4ea008 x23: ffff0000814e4b40 x22: ffff0000814e4d10 x21: ffff0000814e4128 x20: 0000000000000000 x19: ffff0000814e4a80 x18: ffffffffffffffff x17: 000000000000001c x16: ffffcce72b4553f4 x15: ffff80008805b8a7 x14: 0000000000000000 x13: 0000000000000030 x12: 0101010101010101 x11: 7f7f7f7f7f7f7f7f x10: c2ac898b17576267 x9 : ffffcce720fa5404 x8 : ffff000080812138 x7 : 0000000000002e9a x6 : 0000000000000080 x5 : ffff00008de3b000 x4 : 0000000000000000 x3 : 0000000000000001 x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: mlxbf_gige_handle_tx_complete+0xc8/0x170 [mlxbf_gige] mlxbf_gige_poll+0x54/0x160 [mlxbf_gige] __napi_poll+0x40/0x1c8 net_rx_action+0x314/0x3a0 __do_softirq+0x128/0x334 run_ksoftirqd+0x54/0x6c smpboot_thread_fn+0x14c/0x190 kthread+0x10c/0x110 ret_from_fork+0x10/0x20 Code: 8b070000 f9000ea0 f95056c0 f86178a1 (b9407002) ---[ end trace 7cc3941aa0d8e6a4 ]--- Kernel panic - not syncing: Oops: Fatal exception in interrupt Kernel Offset: 0x4ce722520000 from 0xffff800008000000 PHYS_OFFSET: 0x80000000 CPU features: 0x000005c1,a3330e5a Memory Limit: none ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]--- During system shutdown, the mlxbf_gige driver's shutdown() is always executed. However, the driver's stop() method will only execute if networking interface configuration logic within the Linux distribution has been setup to do so. If shutdown() executes but stop() does not execute, NAPI remains enabled and this can lead to an exception if NAPI is scheduled while the hardware interface has only been partially deinitialized. The networking interface managed by the mlxbf_gige driver must be properly stopped during system shutdown so that IFF_UP is cleared, the hardware interface is put into a clean state, and NAPI is fully deinitialized.

It is possible to read the advisory at git.kernel.org. The identification of this vulnerability is CVE-2024-35885 since 05/17/2024. The exploitation is known to be difficult. Technical details of the vulnerability are known, but there is no available exploit.

Upgrading to version 5.15.154, 6.1.85, 6.6.26 or 6.8.5 eliminates this vulnerability. Applying the patch 63a10b530e22/80247e0eca14/36a1cb0371aa/9783b3b0e71d/09ba28e1cd3c is able to eliminate this problem. The bugfix is ready for download at git.kernel.org. The best possible mitigation is suggested to be upgrading to the latest version.

Statistical analysis made it clear that VulDB provides the best quality for vulnerability data.

Productinfo

Type

• Operating System

Vendor

• Linux

Name

• Kernel

Version

• 5.15.153
• 6.1.0
• 6.1.1
• 6.1.2
• 6.1.3
• 6.1.4
• 6.1.5
• 6.1.6
• 6.1.7
• 6.1.8
• 6.1.9
• 6.1.10
• 6.1.11
• 6.1.12
• 6.1.13
• 6.1.14
• 6.1.15
• 6.1.16
• 6.1.17
• 6.1.18
• 6.1.19
• 6.1.20
• 6.1.21
• 6.1.22
• 6.1.23
• 6.1.24
• 6.1.25
• 6.1.26
• 6.1.27
• 6.1.28
• 6.1.29
• 6.1.30
• 6.1.31
• 6.1.32
• 6.1.33
• 6.1.34
• 6.1.35
• 6.1.36
• 6.1.37
• 6.1.38
• 6.1.39
• 6.1.40
• 6.1.41
• 6.1.42
• 6.1.43
• 6.1.44
• 6.1.45
• 6.1.46
• 6.1.47
• 6.1.48
• 6.1.49
• 6.1.50
• 6.1.51
• 6.1.52
• 6.1.53
• 6.1.54
• 6.1.55
• 6.1.56
• 6.1.57
• 6.1.58
• 6.1.59
• 6.1.60
• 6.1.61
• 6.1.62
• 6.1.63
• 6.1.64
• 6.1.65
• 6.1.66
• 6.1.67
• 6.1.68
• 6.1.69
• 6.1.70
• 6.1.71
• 6.1.72
• 6.1.73
• 6.1.74
• 6.1.75
• 6.1.76
• 6.1.77
• 6.1.78
• 6.1.79
• 6.1.80
• 6.1.81
• 6.1.82
• 6.1.83
• 6.1.84
• 6.6.0
• 6.6.1
• 6.6.2
• 6.6.3
• 6.6.4
• 6.6.5
• 6.6.6
• 6.6.7
• 6.6.8
• 6.6.9
• 6.6.10
• 6.6.11
• 6.6.12
• 6.6.13
• 6.6.14
• 6.6.15
• 6.6.16
• 6.6.17
• 6.6.18
• 6.6.19
• 6.6.20
• 6.6.21
• 6.6.22
• 6.6.23
• 6.6.24
• 6.6.25
• 6.8.0
• 6.8.1
• 6.8.2
• 6.8.3
• 6.8.4

License

• open-source

Website

• Vendor: https://www.kernel.org/

CPE 2.3info

• 🔍
• 🔍
• 🔍

CPE 2.2info

• 🔍
• 🔍
• 🔍

CVSSv4info

CVSSv3info

CVSSv2info

Exploitinginfo

Threat Intelligenceinfo

Countermeasuresinfo

Timelineinfo

Sourcesinfo

Entryinfo

Statistical analysis made it clear that VulDB provides the best quality for vulnerability data.

Discussion