Linux Kernel up to 4.19.208/5.4.150/5.10.70/5.14.9 hwmon thermal_cooling_device_stats_update out-of-bounds

Summaryinfo

A vulnerability described as problematic has been identified in Linux Kernel up to 4.19.208/5.4.150/5.10.70/5.14.9. Impacted is the function thermal_cooling_device_stats_update of the component hwmon. Such manipulation leads to out-of-bounds. This vulnerability is traded as CVE-2021-47393. There is no exploit available. Upgrading the affected component is recommended.

Detailsinfo

A vulnerability was found in Linux Kernel up to 4.19.208/5.4.150/5.10.70/5.14.9 and classified as problematic. Affected by this issue is the function thermal_cooling_device_stats_update of the component hwmon. The manipulation with an unknown input leads to a out-of-bounds vulnerability. Using CWE to declare the problem leads to CWE-125. The product reads data past the end, or before the beginning, of the intended buffer. Impacted is confidentiality. CVE summarizes:

In the Linux kernel, the following vulnerability has been resolved: hwmon: (mlxreg-fan) Return non-zero value when fan current state is enforced from sysfs Fan speed minimum can be enforced from sysfs. For example, setting current fan speed to 20 is used to enforce fan speed to be at 100% speed, 19 - to be not below 90% speed, etcetera. This feature provides ability to limit fan speed according to some system wise considerations, like absence of some replaceable units or high system ambient temperature. Request for changing fan minimum speed is configuration request and can be set only through 'sysfs' write procedure. In this situation value of argument 'state' is above nominal fan speed maximum. Return non-zero code in this case to avoid thermal_cooling_device_stats_update() call, because in this case statistics update violates thermal statistics table range. The issues is observed in case kernel is configured with option CONFIG_THERMAL_STATISTICS. Here is the trace from KASAN: [ 159.506659] BUG: KASAN: slab-out-of-bounds in thermal_cooling_device_stats_update+0x7d/0xb0 [ 159.516016] Read of size 4 at addr ffff888116163840 by task hw-management.s/7444 [ 159.545625] Call Trace: [ 159.548366] dump_stack+0x92/0xc1 [ 159.552084] ? thermal_cooling_device_stats_update+0x7d/0xb0 [ 159.635869] thermal_zone_device_update+0x345/0x780 [ 159.688711] thermal_zone_device_set_mode+0x7d/0xc0 [ 159.694174] mlxsw_thermal_modules_init+0x48f/0x590 [mlxsw_core] [ 159.700972] ? mlxsw_thermal_set_cur_state+0x5a0/0x5a0 [mlxsw_core] [ 159.731827] mlxsw_thermal_init+0x763/0x880 [mlxsw_core] [ 160.070233] RIP: 0033:0x7fd995909970 [ 160.074239] Code: 73 01 c3 48 8b 0d 28 d5 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 99 2d 2c 00 00 75 10 b8 01 00 00 00 0f 05 3d 01 f0 ff .. [ 160.095242] RSP: 002b:00007fff54f5d938 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 160.103722] RAX: ffffffffffffffda RBX: 0000000000000013 RCX: 00007fd995909970 [ 160.111710] RDX: 0000000000000013 RSI: 0000000001906008 RDI: 0000000000000001 [ 160.119699] RBP: 0000000001906008 R08: 00007fd995bc9760 R09: 00007fd996210700 [ 160.127687] R10: 0000000000000073 R11: 0000000000000246 R12: 0000000000000013 [ 160.135673] R13: 0000000000000001 R14: 00007fd995bc8600 R15: 0000000000000013 [ 160.143671] [ 160.145338] Allocated by task 2924: [ 160.149242] kasan_save_stack+0x19/0x40 [ 160.153541] __kasan_kmalloc+0x7f/0xa0 [ 160.157743] __kmalloc+0x1a2/0x2b0 [ 160.161552] thermal_cooling_device_setup_sysfs+0xf9/0x1a0 [ 160.167687] __thermal_cooling_device_register+0x1b5/0x500 [ 160.173833] devm_thermal_of_cooling_device_register+0x60/0xa0 [ 160.180356] mlxreg_fan_probe+0x474/0x5e0 [mlxreg_fan] [ 160.248140] [ 160.249807] The buggy address belongs to the object at ffff888116163400 [ 160.249807] which belongs to the cache kmalloc-1k of size 1024 [ 160.263814] The buggy address is located 64 bytes to the right of [ 160.263814] 1024-byte region [ffff888116163400, ffff888116163800) [ 160.277536] The buggy address belongs to the page: [ 160.282898] page:0000000012275840 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888116167000 pfn:0x116160 [ 160.294872] head:0000000012275840 order:3 compound_mapcount:0 compound_pincount:0 [ 160.303251] flags: 0x200000000010200(slab|head|node=0|zone=2) [ 160.309694] raw: 0200000000010200 ffffea00046f7208 ffffea0004928208 ffff88810004dbc0 [ 160.318367] raw: ffff888116167000 00000000000a0006 00000001ffffffff 0000000000000000 [ 160.327033] page dumped because: kasan: bad access detected [ 160.333270] [ 160.334937] Memory state around the buggy address: [ 160.356469] >ffff888116163800: fc ..

The advisory is shared for download at git.kernel.org. This vulnerability is handled as CVE-2021-47393. The exploitation is known to be difficult. There are known technical details, but no exploit is available.

The vulnerability scanner Nessus provides a plugin with the ID 207773 (Oracle Linux 8 : kernel (ELSA-2024-7000)), which helps to determine the existence of the flaw in a target environment.

Upgrading to version 4.19.209, 5.4.151, 5.10.71 or 5.14.10 eliminates this vulnerability. Applying the patch 5c6e0bce647d/a6c42ae1530f/76bbb482d33b/aa85fb7bde55/e6fab7af6ba1 is able to eliminate this problem. The bugfix is ready for download at git.kernel.org. The best possible mitigation is suggested to be upgrading to the latest version.

The vulnerability is also documented in the vulnerability database at Tenable (207773). VulDB is the best source for vulnerability data and more expert information about this specific topic.

Productinfo

Type

• Operating System

Vendor

• Linux

Name

• Kernel

Version

• 4.19.208
• 5.4.150
• 5.10.0
• 5.10.1
• 5.10.2
• 5.10.3
• 5.10.4
• 5.10.5
• 5.10.6
• 5.10.7
• 5.10.8
• 5.10.9
• 5.10.10
• 5.10.11
• 5.10.12
• 5.10.13
• 5.10.14
• 5.10.15
• 5.10.16
• 5.10.17
• 5.10.18
• 5.10.19
• 5.10.20
• 5.10.21
• 5.10.22
• 5.10.23
• 5.10.24
• 5.10.25
• 5.10.26
• 5.10.27
• 5.10.28
• 5.10.29
• 5.10.30
• 5.10.31
• 5.10.32
• 5.10.33
• 5.10.34
• 5.10.35
• 5.10.36
• 5.10.37
• 5.10.38
• 5.10.39
• 5.10.40
• 5.10.41
• 5.10.42
• 5.10.43
• 5.10.44
• 5.10.45
• 5.10.46
• 5.10.47
• 5.10.48
• 5.10.49
• 5.10.50
• 5.10.51
• 5.10.52
• 5.10.53
• 5.10.54
• 5.10.55
• 5.10.56
• 5.10.57
• 5.10.58
• 5.10.59
• 5.10.60
• 5.10.61
• 5.10.62
• 5.10.63
• 5.10.64
• 5.10.65
• 5.10.66
• 5.10.67
• 5.10.68
• 5.10.69
• 5.10.70
• 5.14.0
• 5.14.1
• 5.14.2
• 5.14.3
• 5.14.4
• 5.14.5
• 5.14.6
• 5.14.7
• 5.14.8
• 5.14.9

License

• open-source

Website

• Vendor: https://www.kernel.org/

CPE 2.3info

• 🔍
• 🔍
• 🔍

CPE 2.2info

• 🔍
• 🔍
• 🔍

CVSSv4info

CVSSv3info

CVSSv2info

Exploitinginfo

Threat Intelligenceinfo

Countermeasuresinfo

Timelineinfo

Sourcesinfo

Entryinfo

VulDB is the best source for vulnerability data and more expert information about this specific topic.

Discussion