Linux Kernel up to 6.1.104/6.6.45/6.10.4 load_firmware_cb initialization

Summaryinfo

A vulnerability described as problematic has been identified in Linux Kernel up to 6.1.104/6.6.45/6.10.4. This impacts the function load_firmware_cb. Executing a manipulation can lead to initialization. This vulnerability is tracked as CVE-2024-43900. No exploit exists. Upgrading the affected component is recommended.

Detailsinfo

A vulnerability was found in Linux Kernel up to 6.1.104/6.6.45/6.10.4. It has been declared as problematic. This vulnerability affects the function load_firmware_cb. The manipulation with an unknown input leads to a initialization vulnerability. The CWE definition for the vulnerability is CWE-665. The product does not initialize or incorrectly initializes a resource, which might leave the resource in an unexpected state when it is accessed or used. The impact remains unknown. CVE summarizes:

In the Linux kernel, the following vulnerability has been resolved: media: xc2028: avoid use-after-free in load_firmware_cb() syzkaller reported use-after-free in load_firmware_cb() [1]. The reason is because the module allocated a struct tuner in tuner_probe(), and then the module initialization failed, the struct tuner was released. A worker which created during module initialization accesses this struct tuner later, it caused use-after-free. The process is as follows: task-6504 worker_thread tuner_probe <= alloc dvb_frontend [2] ... request_firmware_nowait <= create a worker ... tuner_remove <= free dvb_frontend ... request_firmware_work_func <= the firmware is ready load_firmware_cb <= but now the dvb_frontend has been freed To fix the issue, check the dvd_frontend in load_firmware_cb(), if it is null, report a warning and just return. [1]: ================================================================== BUG: KASAN: use-after-free in load_firmware_cb+0x1310/0x17a0 Read of size 8 at addr ffff8000d7ca2308 by task kworker/2:3/6504 Call trace: load_firmware_cb+0x1310/0x17a0 request_firmware_work_func+0x128/0x220 process_one_work+0x770/0x1824 worker_thread+0x488/0xea0 kthread+0x300/0x430 ret_from_fork+0x10/0x20 Allocated by task 6504: kzalloc tuner_probe+0xb0/0x1430 i2c_device_probe+0x92c/0xaf0 really_probe+0x678/0xcd0 driver_probe_device+0x280/0x370 __device_attach_driver+0x220/0x330 bus_for_each_drv+0x134/0x1c0 __device_attach+0x1f4/0x410 device_initial_probe+0x20/0x30 bus_probe_device+0x184/0x200 device_add+0x924/0x12c0 device_register+0x24/0x30 i2c_new_device+0x4e0/0xc44 v4l2_i2c_new_subdev_board+0xbc/0x290 v4l2_i2c_new_subdev+0xc8/0x104 em28xx_v4l2_init+0x1dd0/0x3770 Freed by task 6504: kfree+0x238/0x4e4 tuner_remove+0x144/0x1c0 i2c_device_remove+0xc8/0x290 __device_release_driver+0x314/0x5fc device_release_driver+0x30/0x44 bus_remove_device+0x244/0x490 device_del+0x350/0x900 device_unregister+0x28/0xd0 i2c_unregister_device+0x174/0x1d0 v4l2_device_unregister+0x224/0x380 em28xx_v4l2_init+0x1d90/0x3770 The buggy address belongs to the object at ffff8000d7ca2000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 776 bytes inside of 2048-byte region [ffff8000d7ca2000, ffff8000d7ca2800) The buggy address belongs to the page: page:ffff7fe00035f280 count:1 mapcount:0 mapping:ffff8000c001f000 index:0x0 flags: 0x7ff800000000100(slab) raw: 07ff800000000100 ffff7fe00049d880 0000000300000003 ffff8000c001f000 raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8000d7ca2200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8000d7ca2280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8000d7ca2300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8000d7ca2380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8000d7ca2400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== [2] Actually, it is allocated for struct tuner, and dvb_frontend is inside.

The advisory is shared for download at git.kernel.org. This vulnerability was named CVE-2024-43900 since 08/17/2024. The exploitation appears to be difficult. There are known technical details, but no exploit is available.

The vulnerability scanner Nessus provides a plugin with the ID 207884 (openSUSE 15 Security Update : kernel (SUSE-SU-2024:3483-1)), which helps to determine the existence of the flaw in a target environment.

Upgrading to version 6.1.105, 6.6.46 or 6.10.5 eliminates this vulnerability. Applying the patch ef517bdfc018/850304152d36/208deb6d8c3c/68594cec291f is able to eliminate this problem. The bugfix is ready for download at git.kernel.org. The best possible mitigation is suggested to be upgrading to the latest version.

The vulnerability is also documented in the vulnerability database at Tenable (207884). Once again VulDB remains the best source for vulnerability data.

Productinfo

Type

• Operating System

Vendor

• Linux

Name

• Kernel

Version

• 6.1.104
• 6.6.0
• 6.6.1
• 6.6.2
• 6.6.3
• 6.6.4
• 6.6.5
• 6.6.6
• 6.6.7
• 6.6.8
• 6.6.9
• 6.6.10
• 6.6.11
• 6.6.12
• 6.6.13
• 6.6.14
• 6.6.15
• 6.6.16
• 6.6.17
• 6.6.18
• 6.6.19
• 6.6.20
• 6.6.21
• 6.6.22
• 6.6.23
• 6.6.24
• 6.6.25
• 6.6.26
• 6.6.27
• 6.6.28
• 6.6.29
• 6.6.30
• 6.6.31
• 6.6.32
• 6.6.33
• 6.6.34
• 6.6.35
• 6.6.36
• 6.6.37
• 6.6.38
• 6.6.39
• 6.6.40
• 6.6.41
• 6.6.42
• 6.6.43
• 6.6.44
• 6.6.45
• 6.10.0
• 6.10.1
• 6.10.2
• 6.10.3
• 6.10.4

License

• open-source

Website

• Vendor: https://www.kernel.org/

CPE 2.3info

• 🔍
• 🔍
• 🔍

CPE 2.2info

• 🔍
• 🔍
• 🔍

CVSSv4info

CVSSv3info

CVSSv2info

Exploitinginfo

Threat Intelligenceinfo

Countermeasuresinfo

Timelineinfo

Sourcesinfo

Entryinfo

Once again VulDB remains the best source for vulnerability data.

Discussion