Linux Kernel up to 5.18.2 printk deadlock

Summaryinfo

A vulnerability categorized as problematic has been discovered in Linux Kernel up to 5.18.2. This impacts the function printk. The manipulation results in deadlock. This vulnerability is identified as CVE-2022-49441. There is not any exploit available. It is advisable to upgrade the affected component.

Detailsinfo

A vulnerability, which was classified as problematic, was found in Linux Kernel up to 5.18.2. Affected is the function printk. The manipulation with an unknown input leads to a deadlock vulnerability. CWE is classifying the issue as CWE-833. The product contains multiple threads or executable segments that are waiting for each other to release a necessary lock, resulting in deadlock. This is going to have an impact on availability. CVE summarizes:

In the Linux kernel, the following vulnerability has been resolved: tty: fix deadlock caused by calling printk() under tty_port->lock pty_write() invokes kmalloc() which may invoke a normal printk() to print failure message. This can cause a deadlock in the scenario reported by syz-bot below: CPU0 CPU1 CPU2 ---- ---- ---- lock(console_owner); lock(&port_lock_key); lock(&port->lock); lock(&port_lock_key); lock(&port->lock); lock(console_owner); As commit dbdda842fe96 ("printk: Add console owner and waiter logic to load balance console writes") said, such deadlock can be prevented by using printk_deferred() in kmalloc() (which is invoked in the section guarded by the port->lock). But there are too many printk() on the kmalloc() path, and kmalloc() can be called from anywhere, so changing printk() to printk_deferred() is too complicated and inelegant. Therefore, this patch chooses to specify __GFP_NOWARN to kmalloc(), so that printk() will not be called, and this deadlock problem can be avoided. Syzbot reported the following lockdep error: ====================================================== WARNING: possible circular locking dependency detected 5.4.143-00237-g08ccc19a-dirty #10 Not tainted ------------------------------------------------------ syz-executor.4/29420 is trying to acquire lock: ffffffff8aedb2a0 (console_owner){....}-{0:0}, at: console_trylock_spinning kernel/printk/printk.c:1752 [inline] ffffffff8aedb2a0 (console_owner){....}-{0:0}, at: vprintk_emit+0x2ca/0x470 kernel/printk/printk.c:2023 but task is already holding lock: ffff8880119c9158 (&port->lock){-.-.}-{2:2}, at: pty_write+0xf4/0x1f0 drivers/tty/pty.c:120 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&port->lock){-.-.}-{2:2}: __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x35/0x50 kernel/locking/spinlock.c:159 tty_port_tty_get drivers/tty/tty_port.c:288 [inline] lock); tty_port_default_wakeup+0x1d/0xb0 drivers/tty/tty_port.c:47 serial8250_tx_chars+0x530/0xa80 drivers/tty/serial/8250/8250_port.c:1767 serial8250_handle_irq.part.0+0x31f/0x3d0 drivers/tty/serial/8250/8250_port.c:1854 serial8250_handle_irq drivers/tty/serial/8250/8250_port.c:1827 [inline] <-- lock(&port_lock_key); serial8250_default_handle_irq+0xb2/0x220 drivers/tty/serial/8250/8250_port.c:1870 serial8250_interrupt+0xfd/0x200 drivers/tty/serial/8250/8250_core.c:126 __handle_irq_event_percpu+0x109/0xa50 kernel/irq/handle.c:156 [...] -> #1 (&port_lock_key){-.-.}-{2:2}: __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x35/0x50 kernel/locking/spinlock.c:159 serial8250_console_write+0x184/0xa40 drivers/tty/serial/8250/8250_port.c:3198 <-- lock(&port_lock_key); call_console_drivers kernel/printk/printk.c:1819 [inline] console_unlock+0x8cb/0xd00 kernel/printk/printk.c:2504 vprintk_emit+0x1b5/0x470 kernel/printk/printk.c:2024 <-- lock(console_owner); vprintk_func+0x8d/0x250 kernel/printk/printk_safe.c:394 printk+0xba/0xed kernel/printk/printk.c:2084 register_console+0x8b3/0xc10 kernel/printk/printk.c:2829 univ8250_console_init+0x3a/0x46 drivers/tty/serial/8250/8250_core.c:681 console_init+0x49d/0x6d3 kernel/printk/printk.c:2915 start_kernel+0x5e9/0x879 init/main.c:713 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:241 -> #0 (console_owner){....}-{0:0}: [...] lock_acquire+0x127/0x340 kernel/locking/lockdep.c:4734 console_trylock_spinning kernel/printk/printk.c:1773 ---truncated---

The advisory is shared for download at git.kernel.org. This vulnerability is traded as CVE-2022-49441 since 02/26/2025. The exploitability is told to be difficult. There are known technical details, but no exploit is available.

The vulnerability scanner Nessus provides a plugin with the ID 235744 (EulerOS 2.0 SP10 : kernel (EulerOS-SA-2025-1520)), which helps to determine the existence of the flaw in a target environment.

Upgrading to version 4.9.318, 4.14.283, 4.19.247, 5.4.198, 5.10.121, 5.15.46, 5.17.14 or 5.18.3 eliminates this vulnerability. Applying the patch 4af21b12a60ed2d3642284f4f85b42d7dc6ac246/4c253caf9264d2aa47ee806a87986dd8eb91a5d9/04ee31678c128a6cc7bb057ea189a8624ba5a314/3219ac364ac3d8d30771612a6010f1e0b7fa0a28/9834b13e8b962caa28fbcf1f422dd82413da4ede/18ca0d55e8639b911df8aae1b47598b13f9acded/b3c974501d0c32258ae0e04e5cc3fb92383b40f6/0bcf44903ef4df742dcada86ccaedd25374ffb50/6b9dbedbe3499fef862c4dff5217cf91f34e43b3 is able to eliminate this problem. The bugfix is ready for download at git.kernel.org. The best possible mitigation is suggested to be upgrading to the latest version.

The vulnerability is also documented in the vulnerability database at Tenable (235744). VulDB is the best source for vulnerability data and more expert information about this specific topic.

Productinfo

Type

• Operating System

Vendor

• Linux

Name

• Kernel

Version

• 4.9.317
• 4.14.282
• 4.19.246
• 5.4.197
• 5.10.120
• 5.15.0
• 5.15.1
• 5.15.2
• 5.15.3
• 5.15.4
• 5.15.5
• 5.15.6
• 5.15.7
• 5.15.8
• 5.15.9
• 5.15.10
• 5.15.11
• 5.15.12
• 5.15.13
• 5.15.14
• 5.15.15
• 5.15.16
• 5.15.17
• 5.15.18
• 5.15.19
• 5.15.20
• 5.15.21
• 5.15.22
• 5.15.23
• 5.15.24
• 5.15.25
• 5.15.26
• 5.15.27
• 5.15.28
• 5.15.29
• 5.15.30
• 5.15.31
• 5.15.32
• 5.15.33
• 5.15.34
• 5.15.35
• 5.15.36
• 5.15.37
• 5.15.38
• 5.15.39
• 5.15.40
• 5.15.41
• 5.15.42
• 5.15.43
• 5.15.44
• 5.15.45
• 5.17.0
• 5.17.1
• 5.17.2
• 5.17.3
• 5.17.4
• 5.17.5
• 5.17.6
• 5.17.7
• 5.17.8
• 5.17.9
• 5.17.10
• 5.17.11
• 5.17.12
• 5.17.13
• 5.18.0
• 5.18.1
• 5.18.2

License

• open-source

Website

• Vendor: https://www.kernel.org/

CPE 2.3info

• 🔍
• 🔍
• 🔍

CPE 2.2info

• 🔍
• 🔍
• 🔍

CVSSv4info

CVSSv3info

CVSSv2info

Exploitinginfo

Threat Intelligenceinfo

Countermeasuresinfo

Timelineinfo

Sourcesinfo

Entryinfo

VulDB is the best source for vulnerability data and more expert information about this specific topic.

Discussion