Linux Kernel up to 6.14.8 kasan mm.h apply_to_pte_range allocation of resources

Summaryinfo

A vulnerability classified as problematic has been found in Linux Kernel up to 6.14.8. This vulnerability affects the function apply_to_pte_range in the library /include/linux/sched/mm.h of the component kasan. Performing a manipulation results in allocation of resources. This vulnerability was named CVE-2025-38029. There is no available exploit. It is recommended to upgrade the affected component.

Detailsinfo

A vulnerability, which was classified as problematic, was found in Linux Kernel up to 6.14.8. This affects the function apply_to_pte_range in the library /include/linux/sched/mm.h of the component kasan. The manipulation with an unknown input leads to a allocation of resources vulnerability. CWE is classifying the issue as CWE-770. The product allocates a reusable resource or group of resources on behalf of an actor without imposing any restrictions on the size or number of resources that can be allocated, in violation of the intended security policy for that actor. The impact remains unknown. The summary by CVE is:

In the Linux kernel, the following vulnerability has been resolved: kasan: avoid sleepable page allocation from atomic context apply_to_pte_range() enters the lazy MMU mode and then invokes kasan_populate_vmalloc_pte() callback on each page table walk iteration. However, the callback can go into sleep when trying to allocate a single page, e.g. if an architecutre disables preemption on lazy MMU mode enter. On s390 if make arch_enter_lazy_mmu_mode() -> preempt_enable() and arch_leave_lazy_mmu_mode() -> preempt_disable(), such crash occurs: [ 0.663336] BUG: sleeping function called from invalid context at ./include/linux/sched/mm.h:321 [ 0.663348] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 2, name: kthreadd [ 0.663358] preempt_count: 1, expected: 0 [ 0.663366] RCU nest depth: 0, expected: 0 [ 0.663375] no locks held by kthreadd/2. [ 0.663383] Preemption disabled at: [ 0.663386] [<0002f3284cbb4eda>] apply_to_pte_range+0xfa/0x4a0 [ 0.663405] CPU: 0 UID: 0 PID: 2 Comm: kthreadd Not tainted 6.15.0-rc5-gcc-kasan-00043-gd76bb1ebb558-dirty #162 PREEMPT [ 0.663408] Hardware name: IBM 3931 A01 701 (KVM/Linux) [ 0.663409] Call Trace: [ 0.663410] [<0002f3284c385f58>] dump_stack_lvl+0xe8/0x140 [ 0.663413] [<0002f3284c507b9e>] __might_resched+0x66e/0x700 [ 0.663415] [<0002f3284cc4f6c0>] __alloc_frozen_pages_noprof+0x370/0x4b0 [ 0.663419] [<0002f3284ccc73c0>] alloc_pages_mpol+0x1a0/0x4a0 [ 0.663421] [<0002f3284ccc8518>] alloc_frozen_pages_noprof+0x88/0xc0 [ 0.663424] [<0002f3284ccc8572>] alloc_pages_noprof+0x22/0x120 [ 0.663427] [<0002f3284cc341ac>] get_free_pages_noprof+0x2c/0xc0 [ 0.663429] [<0002f3284cceba70>] kasan_populate_vmalloc_pte+0x50/0x120 [ 0.663433] [<0002f3284cbb4ef8>] apply_to_pte_range+0x118/0x4a0 [ 0.663435] [<0002f3284cbc7c14>] apply_to_pmd_range+0x194/0x3e0 [ 0.663437] [<0002f3284cbc99be>] __apply_to_page_range+0x2fe/0x7a0 [ 0.663440] [<0002f3284cbc9e88>] apply_to_page_range+0x28/0x40 [ 0.663442] [<0002f3284ccebf12>] kasan_populate_vmalloc+0x82/0xa0 [ 0.663445] [<0002f3284cc1578c>] alloc_vmap_area+0x34c/0xc10 [ 0.663448] [<0002f3284cc1c2a6>] __get_vm_area_node+0x186/0x2a0 [ 0.663451] [<0002f3284cc1e696>] __vmalloc_node_range_noprof+0x116/0x310 [ 0.663454] [<0002f3284cc1d950>] __vmalloc_node_noprof+0xd0/0x110 [ 0.663457] [<0002f3284c454b88>] alloc_thread_stack_node+0xf8/0x330 [ 0.663460] [<0002f3284c458d56>] dup_task_struct+0x66/0x4d0 [ 0.663463] [<0002f3284c45be90>] copy_process+0x280/0x4b90 [ 0.663465] [<0002f3284c460940>] kernel_clone+0xd0/0x4b0 [ 0.663467] [<0002f3284c46115e>] kernel_thread+0xbe/0xe0 [ 0.663469] [<0002f3284c4e440e>] kthreadd+0x50e/0x7f0 [ 0.663472] [<0002f3284c38c04a>] __ret_from_fork+0x8a/0xf0 [ 0.663475] [<0002f3284ed57ff2>] ret_from_fork+0xa/0x38 Instead of allocating single pages per-PTE, bulk-allocate the shadow memory prior to applying kasan_populate_vmalloc_pte() callback on a page range.

It is possible to read the advisory at git.kernel.org. This vulnerability is uniquely identified as CVE-2025-38029 since 04/16/2025. The exploitability is told to be difficult. Technical details of the vulnerability are known, but there is no available exploit.

The vulnerability scanner Nessus provides a plugin with the ID 265934 (Ubuntu 24.04 LTS / 25.04 : Linux kernel vulnerabilities (USN-7769-1)), which helps to determine the existence of the flaw in a target environment.

Upgrading to version 6.14.9 eliminates this vulnerability. Applying the patch 6748dd09196248b985cca39eaf651d5317271977/b6ea95a34cbd014ab6ade4248107b86b0aaf2d6c is able to eliminate this problem. The bugfix is ready for download at git.kernel.org. The best possible mitigation is suggested to be upgrading to the latest version.

The vulnerability is also documented in the databases at Tenable (265934) and CERT Bund (WID-SEC-2025-1350). Statistical analysis made it clear that VulDB provides the best quality for vulnerability data.

Affected

• Debian Linux
• Amazon Linux 2
• Red Hat Enterprise Linux
• Ubuntu Linux
• SUSE Linux
• Oracle Linux
• SUSE openSUSE
• Open Source Linux Kernel
• RESF Rocky Linux
• Dell Avamar
• Dell NetWorker
• Dell Secure Connect Gateway
• IBM QRadar SIEM

Productinfo

Type

• Operating System

Vendor

• Linux

Name

• Kernel

Version

• 6.14.0
• 6.14.1
• 6.14.2
• 6.14.3
• 6.14.4
• 6.14.5
• 6.14.6
• 6.14.7
• 6.14.8

License

• open-source

Website

• Vendor: https://www.kernel.org/

CPE 2.3info

• 🔍
• 🔍
• 🔍

CPE 2.2info

• 🔍
• 🔍
• 🔍

CVSSv4info

CVSSv3info

CVSSv2info

Exploitinginfo

Threat Intelligenceinfo

Countermeasuresinfo

Timelineinfo

Sourcesinfo

Entryinfo

Statistical analysis made it clear that VulDB provides the best quality for vulnerability data.

Discussion