Linux Kernel up to 5.19.7 gpio_fan_set_cur_state array index

Summaryinfo

A vulnerability marked as problematic has been reported in Linux Kernel up to 5.19.7. Affected by this vulnerability is the function gpio_fan_set_cur_state. Performing a manipulation results in array index. This vulnerability is cataloged as CVE-2022-49945. There is no exploit available. It is suggested to upgrade the affected component.

Detailsinfo

A vulnerability classified as problematic has been found in Linux Kernel up to 5.19.7. This affects the function gpio_fan_set_cur_state. The manipulation with an unknown input leads to a array index vulnerability. CWE is classifying the issue as CWE-129. The product uses untrusted input when calculating or using an array index, but the product does not validate or incorrectly validates the index to ensure the index references a valid position within the array. The impact remains unknown. The summary by CVE is:

In the Linux kernel, the following vulnerability has been resolved: hwmon: (gpio-fan) Fix array out of bounds access The driver does not check if the cooling state passed to gpio_fan_set_cur_state() exceeds the maximum cooling state as stored in fan_data->num_speeds. Since the cooling state is later used as an array index in set_fan_speed(), an array out of bounds access can occur. This can be exploited by setting the state of the thermal cooling device to arbitrary values, causing for example a kernel oops when unavailable memory is accessed this way. Example kernel oops: [ 807.987276] Unable to handle kernel paging request at virtual address ffffff80d0588064 [ 807.987369] Mem abort info: [ 807.987398] ESR = 0x96000005 [ 807.987428] EC = 0x25: DABT (current EL), IL = 32 bits [ 807.987477] SET = 0, FnV = 0 [ 807.987507] EA = 0, S1PTW = 0 [ 807.987536] FSC = 0x05: level 1 translation fault [ 807.987570] Data abort info: [ 807.987763] ISV = 0, ISS = 0x00000005 [ 807.987801] CM = 0, WnR = 0 [ 807.987832] swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000001165000 [ 807.987872] [ffffff80d0588064] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 807.987961] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 807.987992] Modules linked in: cmac algif_hash aes_arm64 algif_skcipher af_alg bnep hci_uart btbcm bluetooth ecdh_generic ecc 8021q garp stp llc snd_soc_hdmi_codec brcmfmac vc4 brcmutil cec drm_kms_helper snd_soc_core cfg80211 snd_compress bcm2835_codec(C) snd_pcm_dmaengine syscopyarea bcm2835_isp(C) bcm2835_v4l2(C) sysfillrect v4l2_mem2mem bcm2835_mmal_vchiq(C) raspberrypi_hwmon sysimgblt videobuf2_dma_contig videobuf2_vmalloc fb_sys_fops videobuf2_memops rfkill videobuf2_v4l2 videobuf2_common i2c_bcm2835 snd_bcm2835(C) videodev snd_pcm snd_timer snd mc vc_sm_cma(C) gpio_fan uio_pdrv_genirq uio drm fuse drm_panel_orientation_quirks backlight ip_tables x_tables ipv6 [ 807.988508] CPU: 0 PID: 1321 Comm: bash Tainted: G C 5.15.56-v8+ #1575 [ 807.988548] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT) [ 807.988574] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 807.988608] pc : set_fan_speed.part.5+0x34/0x80 [gpio_fan] [ 807.988654] lr : gpio_fan_set_cur_state+0x34/0x50 [gpio_fan] [ 807.988691] sp : ffffffc008cf3bd0 [ 807.988710] x29: ffffffc008cf3bd0 x28: ffffff80019edac0 x27: 0000000000000000 [ 807.988762] x26: 0000000000000000 x25: 0000000000000000 x24: ffffff800747c920 [ 807.988787] x23: 000000000000000a x22: ffffff800369f000 x21: 000000001999997c [ 807.988854] x20: ffffff800369f2e8 x19: ffffff8002ae8080 x18: 0000000000000000 [ 807.988877] x17: 0000000000000000 x16: 0000000000000000 x15: 000000559e271b70 [ 807.988938] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 807.988960] x11: 0000000000000000 x10: ffffffc008cf3c20 x9 : ffffffcfb60c741c [ 807.989018] x8 : 000000000000000a x7 : 00000000ffffffc9 x6 : 0000000000000009 [ 807.989040] x5 : 000000000000002a x4 : 0000000000000000 x3 : ffffff800369f2e8 [ 807.989062] x2 : 000000000000e780 x1 : 0000000000000001 x0 : ffffff80d0588060 [ 807.989084] Call trace: [ 807.989091] set_fan_speed.part.5+0x34/0x80 [gpio_fan] [ 807.989113] gpio_fan_set_cur_state+0x34/0x50 [gpio_fan] [ 807.989199] cur_state_store+0x84/0xd0 [ 807.989221] dev_attr_store+0x20/0x38 [ 807.989262] sysfs_kf_write+0x4c/0x60 [ 807.989282] kernfs_fop_write_iter+0x130/0x1c0 [ 807.989298] new_sync_write+0x10c/0x190 [ 807.989315] vfs_write+0x254/0x378 [ 807.989362] ksys_write+0x70/0xf8 [ 807.989379] __arm64_sys_write+0x24/0x30 [ 807.989424] invoke_syscall+0x4c/0x110 [ 807.989442] el0_svc_common.constprop.3+0xfc/0x120 [ 807.989458] do_el0_svc+0x2c/0x90 [ 807.989473] el0_svc+0x24/0x60 [ 807.989544] el0t_64_sync_handler+0x90/0xb8 [ 807.989558] el0t_64_sync+0x1a0/0x1a4 [ 807.989579] Code: b9403801 f9402800 7100003f 8b35cc00 (b9400416) [ 807.989627] ---[ end t ---truncated---

It is possible to read the advisory at git.kernel.org. This vulnerability is uniquely identified as CVE-2022-49945 since 06/18/2025. The exploitability is told to be difficult. Technical details of the vulnerability are known, but there is no available exploit. The pricing for an exploit might be around USD $0-$5k at the moment (estimation calculated on 11/30/2025).

Upgrading to version 4.9.328, 4.14.293, 4.19.258, 5.4.213, 5.10.142, 5.15.66 or 5.19.8 eliminates this vulnerability. Applying the patch e9f6972ab40a82bd7f6d36800792ba2e084474d8/3ff866455e1e263a9ac1958095fd440984248e2f/c8ae6a18708f260ccdeef6ba53af7548457dc26c/7756eb1ed124753f4d64f761fc3d84290dffcb4d/517dba798793e69b510779c3cde7224a65f3ed1d/53196e0376205ed49b75bfd0475af5e0fbd20156/3263984c7acdcb0658155b05a724ed45a10de76d/f233d2be38dbbb22299192292983037f01ab363c is able to eliminate this problem. The bugfix is ready for download at git.kernel.org. The best possible mitigation is suggested to be upgrading to the latest version.

The vulnerability is also documented in the vulnerability database at CERT Bund (WID-SEC-2025-1350). Statistical analysis made it clear that VulDB provides the best quality for vulnerability data.

Affected

• Debian Linux
• Amazon Linux 2
• Red Hat Enterprise Linux
• Ubuntu Linux
• SUSE Linux
• Oracle Linux
• SUSE openSUSE
• Open Source Linux Kernel
• RESF Rocky Linux
• Dell Avamar
• Dell NetWorker
• Dell Secure Connect Gateway
• IBM QRadar SIEM

Productinfo

Type

• Operating System

Vendor

• Linux

Name

• Kernel

Version

• 4.9.327
• 4.14.292
• 4.19.257
• 5.4.212
• 5.10.141
• 5.15.0
• 5.15.1
• 5.15.2
• 5.15.3
• 5.15.4
• 5.15.5
• 5.15.6
• 5.15.7
• 5.15.8
• 5.15.9
• 5.15.10
• 5.15.11
• 5.15.12
• 5.15.13
• 5.15.14
• 5.15.15
• 5.15.16
• 5.15.17
• 5.15.18
• 5.15.19
• 5.15.20
• 5.15.21
• 5.15.22
• 5.15.23
• 5.15.24
• 5.15.25
• 5.15.26
• 5.15.27
• 5.15.28
• 5.15.29
• 5.15.30
• 5.15.31
• 5.15.32
• 5.15.33
• 5.15.34
• 5.15.35
• 5.15.36
• 5.15.37
• 5.15.38
• 5.15.39
• 5.15.40
• 5.15.41
• 5.15.42
• 5.15.43
• 5.15.44
• 5.15.45
• 5.15.46
• 5.15.47
• 5.15.48
• 5.15.49
• 5.15.50
• 5.15.51
• 5.15.52
• 5.15.53
• 5.15.54
• 5.15.55
• 5.15.56
• 5.15.57
• 5.15.58
• 5.15.59
• 5.15.60
• 5.15.61
• 5.15.62
• 5.15.63
• 5.15.64
• 5.15.65
• 5.19.0
• 5.19.1
• 5.19.2
• 5.19.3
• 5.19.4
• 5.19.5
• 5.19.6
• 5.19.7

License

• open-source

Website

• Vendor: https://www.kernel.org/

CPE 2.3info

• 🔍
• 🔍
• 🔍

CPE 2.2info

• 🔍
• 🔍
• 🔍

CVSSv4info

CVSSv3info

CVSSv2info

Exploitinginfo

Threat Intelligenceinfo

Countermeasuresinfo

Timelineinfo

Sourcesinfo

Entryinfo

Statistical analysis made it clear that VulDB provides the best quality for vulnerability data.

Discussion