Linux Kernel up to 5.19.1 lvconvert-raid-reshape.sh raid10_remove_disk out-of-bounds

Summaryinfo

A vulnerability categorized as problematic has been discovered in Linux Kernel up to 5.19.1. Affected is the function raid10_remove_disk of the file lvconvert-raid-reshape.sh. Such manipulation leads to out-of-bounds. This vulnerability is uniquely identified as CVE-2022-50211. The attack can be executed directly on the physical device. No exploit exists. It is advisable to upgrade the affected component.

Detailsinfo

A vulnerability, which was classified as problematic, has been found in Linux Kernel up to 5.19.1. Affected by this issue is the function raid10_remove_disk of the file lvconvert-raid-reshape.sh. The manipulation with an unknown input leads to a out-of-bounds vulnerability. Using CWE to declare the problem leads to CWE-125. The product reads data past the end, or before the beginning, of the intended buffer. Impacted is confidentiality. CVE summarizes:

In the Linux kernel, the following vulnerability has been resolved: md-raid10: fix KASAN warning There's a KASAN warning in raid10_remove_disk when running the lvm test lvconvert-raid-reshape.sh. We fix this warning by verifying that the value "number" is valid. BUG: KASAN: slab-out-of-bounds in raid10_remove_disk+0x61/0x2a0 [raid10] Read of size 8 at addr ffff889108f3d300 by task mdX_raid10/124682 CPU: 3 PID: 124682 Comm: mdX_raid10 Not tainted 5.19.0-rc6 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x34/0x44 print_report.cold+0x45/0x57a ? __lock_text_start+0x18/0x18 ? raid10_remove_disk+0x61/0x2a0 [raid10] kasan_report+0xa8/0xe0 ? raid10_remove_disk+0x61/0x2a0 [raid10] raid10_remove_disk+0x61/0x2a0 [raid10] Buffer I/O error on dev dm-76, logical block 15344, async page read ? __mutex_unlock_slowpath.constprop.0+0x1e0/0x1e0 remove_and_add_spares+0x367/0x8a0 [md_mod] ? super_written+0x1c0/0x1c0 [md_mod] ? mutex_trylock+0xac/0x120 ? _raw_spin_lock+0x72/0xc0 ? _raw_spin_lock_bh+0xc0/0xc0 md_check_recovery+0x848/0x960 [md_mod] raid10d+0xcf/0x3360 [raid10] ? sched_clock_cpu+0x185/0x1a0 ? rb_erase+0x4d4/0x620 ? var_wake_function+0xe0/0xe0 ? psi_group_change+0x411/0x500 ? preempt_count_sub+0xf/0xc0 ? _raw_spin_lock_irqsave+0x78/0xc0 ? __lock_text_start+0x18/0x18 ? raid10_sync_request+0x36c0/0x36c0 [raid10] ? preempt_count_sub+0xf/0xc0 ? _raw_spin_unlock_irqrestore+0x19/0x40 ? del_timer_sync+0xa9/0x100 ? try_to_del_timer_sync+0xc0/0xc0 ? _raw_spin_lock_irqsave+0x78/0xc0 ? __lock_text_start+0x18/0x18 ? _raw_spin_unlock_irq+0x11/0x24 ? __list_del_entry_valid+0x68/0xa0 ? finish_wait+0xa3/0x100 md_thread+0x161/0x260 [md_mod] ? unregister_md_personality+0xa0/0xa0 [md_mod] ? _raw_spin_lock_irqsave+0x78/0xc0 ? prepare_to_wait_event+0x2c0/0x2c0 ? unregister_md_personality+0xa0/0xa0 [md_mod] kthread+0x148/0x180 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Allocated by task 124495: kasan_save_stack+0x1e/0x40 __kasan_kmalloc+0x80/0xa0 setup_conf+0x140/0x5c0 [raid10] raid10_run+0x4cd/0x740 [raid10] md_run+0x6f9/0x1300 [md_mod] raid_ctr+0x2531/0x4ac0 [dm_raid] dm_table_add_target+0x2b0/0x620 [dm_mod] table_load+0x1c8/0x400 [dm_mod] ctl_ioctl+0x29e/0x560 [dm_mod] dm_compat_ctl_ioctl+0x7/0x20 [dm_mod] __do_compat_sys_ioctl+0xfa/0x160 do_syscall_64+0x90/0xc0 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Last potentially related work creation: kasan_save_stack+0x1e/0x40 __kasan_record_aux_stack+0x9e/0xc0 kvfree_call_rcu+0x84/0x480 timerfd_release+0x82/0x140 L __fput+0xfa/0x400 task_work_run+0x80/0xc0 exit_to_user_mode_prepare+0x155/0x160 syscall_exit_to_user_mode+0x12/0x40 do_syscall_64+0x42/0xc0 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Second to last potentially related work creation: kasan_save_stack+0x1e/0x40 __kasan_record_aux_stack+0x9e/0xc0 kvfree_call_rcu+0x84/0x480 timerfd_release+0x82/0x140 __fput+0xfa/0x400 task_work_run+0x80/0xc0 exit_to_user_mode_prepare+0x155/0x160 syscall_exit_to_user_mode+0x12/0x40 do_syscall_64+0x42/0xc0 entry_SYSCALL_64_after_hwframe+0x46/0xb0 The buggy address belongs to the object at ffff889108f3d200 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 0 bytes to the right of 256-byte region [ffff889108f3d200, ffff889108f3d300) The buggy address belongs to the physical page: page:000000007ef2a34c refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1108f3c head:000000007ef2a34c order:2 compound_mapcount:0 compound_pincount:0 flags: 0x4000000000010200(slab|head|zone=2) raw: 4000000000010200 0000000000000000 dead000000000001 ffff889100042b40 raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff889108f3d200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff889108f3d280: 00 00 ---truncated---

The advisory is available at git.kernel.org. This vulnerability is handled as CVE-2022-50211 since 06/18/2025. The exploitation is known to be difficult. Local access is required to approach this attack. Technical details are known, but there is no available exploit.

The vulnerability scanner Nessus provides a plugin with the ID 264496 (RHEL 8 : kernel (RHSA-2025:15656)), which helps to determine the existence of the flaw in a target environment.

Upgrading to version 4.9.326, 4.14.291, 4.19.256, 5.4.211, 5.10.137, 5.15.61, 5.18.18 or 5.19.2 eliminates this vulnerability. Applying the patch 75fbd370a2cec9e92f48285bd90735ed0c837f52/bcbdc26a44aba488d2f7122f2d66801bccb74733/7a6ccc8fa192fd357c2d5d4c6ce67c834a179e23/ce839b9331c11780470f3d727b6fe3c2794a4620/5fd4ffa2372a41361d2bdd27ea5730e4e673240c/0f4d18cbea4a6e37a05fd8ee2887439f85211110/bf30b9ba09b0ac2a10f04dce2b0835ec4d178aa6/5f57843565131bb782388f9d993f9ee8f453dee1/d17f744e883b2f8d13cca252d71cfe8ace346f7d is able to eliminate this problem. The bugfix is ready for download at git.kernel.org. The best possible mitigation is suggested to be upgrading to the latest version.

The vulnerability is also documented in the databases at Tenable (264496) and CERT Bund (WID-SEC-2025-1350). If you want to get best quality of vulnerability data, you may have to visit VulDB.

Affected

• Debian Linux
• Amazon Linux 2
• Red Hat Enterprise Linux
• Ubuntu Linux
• SUSE Linux
• Oracle Linux
• SUSE openSUSE
• Open Source Linux Kernel
• RESF Rocky Linux
• Dell Avamar
• Dell NetWorker
• Dell Secure Connect Gateway
• IBM QRadar SIEM

Productinfo

Type

• Operating System

Vendor

• Linux

Name

• Kernel

Version

• 4.9.325
• 4.14.290
• 4.19.255
• 5.4.210
• 5.10.136
• 5.15.0
• 5.15.1
• 5.15.2
• 5.15.3
• 5.15.4
• 5.15.5
• 5.15.6
• 5.15.7
• 5.15.8
• 5.15.9
• 5.15.10
• 5.15.11
• 5.15.12
• 5.15.13
• 5.15.14
• 5.15.15
• 5.15.16
• 5.15.17
• 5.15.18
• 5.15.19
• 5.15.20
• 5.15.21
• 5.15.22
• 5.15.23
• 5.15.24
• 5.15.25
• 5.15.26
• 5.15.27
• 5.15.28
• 5.15.29
• 5.15.30
• 5.15.31
• 5.15.32
• 5.15.33
• 5.15.34
• 5.15.35
• 5.15.36
• 5.15.37
• 5.15.38
• 5.15.39
• 5.15.40
• 5.15.41
• 5.15.42
• 5.15.43
• 5.15.44
• 5.15.45
• 5.15.46
• 5.15.47
• 5.15.48
• 5.15.49
• 5.15.50
• 5.15.51
• 5.15.52
• 5.15.53
• 5.15.54
• 5.15.55
• 5.15.56
• 5.15.57
• 5.15.58
• 5.15.59
• 5.15.60
• 5.18.0
• 5.18.1
• 5.18.2
• 5.18.3
• 5.18.4
• 5.18.5
• 5.18.6
• 5.18.7
• 5.18.8
• 5.18.9
• 5.18.10
• 5.18.11
• 5.18.12
• 5.18.13
• 5.18.14
• 5.18.15
• 5.18.16
• 5.18.17
• 5.19.0
• 5.19.1

License

• open-source

Website

• Vendor: https://www.kernel.org/

CPE 2.3info

• 🔍
• 🔍
• 🔍

CPE 2.2info

• 🔍
• 🔍
• 🔍

CVSSv4info

CVSSv3info

CVSSv2info

Exploitinginfo

Threat Intelligenceinfo

Countermeasuresinfo

Timelineinfo

Sourcesinfo

Entryinfo

If you want to get best quality of vulnerability data, you may have to visit VulDB.

Discussion