Linux Kernel up to 6.6.48 Bluetooth btnxpuart_queue_skb iteration

Summaryinfo

A vulnerability was found in Linux Kernel up to 6.6.48. It has been declared as problematic. Impacted is the function btnxpuart_queue_skb of the component Bluetooth. Such manipulation leads to iteration. This vulnerability is documented as CVE-2024-58238. There is not any exploit available. It is recommended to upgrade the affected component.

Detailsinfo

A vulnerability was found in Linux Kernel up to 6.6.48. It has been rated as problematic. Affected by this issue is the function btnxpuart_queue_skb of the component Bluetooth. The manipulation with an unknown input leads to a iteration vulnerability. Using CWE to declare the problem leads to CWE-834. The product performs an iteration or loop without sufficiently limiting the number of times that the loop is executed. Impacted is availability. CVE summarizes:

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btnxpuart: Resolve TX timeout error in power save stress test This fixes the tx timeout issue seen while running a stress test on btnxpuart for couple of hours, such that the interval between two HCI commands coincide with the power save timeout value of 2 seconds. Test procedure using bash script: <load btnxpuart.ko> hciconfig hci0 up //Enable Power Save feature hcitool -i hci0 cmd 3f 23 02 00 00 while (true) do hciconfig hci0 leadv sleep 2 hciconfig hci0 noleadv sleep 2 done Error log, after adding few more debug prints: Bluetooth: btnxpuart_queue_skb(): 01 0A 20 01 00 Bluetooth: hci0: Set UART break: on, status=0 Bluetooth: hci0: btnxpuart_tx_wakeup() tx_work scheduled Bluetooth: hci0: btnxpuart_tx_work() dequeue: 01 0A 20 01 00 Can't set advertise mode on hci0: Connection timed out (110) Bluetooth: hci0: command 0x200a tx timeout When the power save mechanism turns on UART break, and btnxpuart_tx_work() is scheduled simultaneously, psdata->ps_state is read as PS_STATE_AWAKE, which prevents the psdata->work from being scheduled, which is responsible to turn OFF UART break. This issue is fixed by adding a ps_lock mutex around UART break on/off as well as around ps_state read/write. btnxpuart_tx_wakeup() will now read updated ps_state value. If ps_state is PS_STATE_SLEEP, it will first schedule psdata->work, and then it will reschedule itself once UART break has been turned off and ps_state is PS_STATE_AWAKE. Tested above script for 50,000 iterations and TX timeout error was not observed anymore.

The advisory is available at git.kernel.org. This vulnerability is handled as CVE-2024-58238 since 04/16/2025. Technical details are known, but there is no available exploit.

Upgrading to version 6.6.49 eliminates this vulnerability. Applying the patch 9d5df94ce0e213d5b549633f528f96114c736190/e4db90e4eb8d5487098712ffb1048f3fa6d25e98 is able to eliminate this problem. The bugfix is ready for download at git.kernel.org. The best possible mitigation is suggested to be upgrading to the latest version.

The vulnerability is also documented in the databases at EUVD (EUVD-2024-54861) and CERT Bund (WID-SEC-2025-1754). If you want to get best quality of vulnerability data, you may have to visit VulDB.

Affected

• SUSE Linux
• Open Source Linux Kernel
• Dell NetWorker

Productinfo

Type

• Operating System

Vendor

• Linux

Name

• Kernel

Version

• 6.6.0
• 6.6.1
• 6.6.2
• 6.6.3
• 6.6.4
• 6.6.5
• 6.6.6
• 6.6.7
• 6.6.8
• 6.6.9
• 6.6.10
• 6.6.11
• 6.6.12
• 6.6.13
• 6.6.14
• 6.6.15
• 6.6.16
• 6.6.17
• 6.6.18
• 6.6.19
• 6.6.20
• 6.6.21
• 6.6.22
• 6.6.23
• 6.6.24
• 6.6.25
• 6.6.26
• 6.6.27
• 6.6.28
• 6.6.29
• 6.6.30
• 6.6.31
• 6.6.32
• 6.6.33
• 6.6.34
• 6.6.35
• 6.6.36
• 6.6.37
• 6.6.38
• 6.6.39
• 6.6.40
• 6.6.41
• 6.6.42
• 6.6.43
• 6.6.44
• 6.6.45
• 6.6.46
• 6.6.47
• 6.6.48

License

• open-source

Website

• Vendor: https://www.kernel.org/

CPE 2.3info

• 🔒
• 🔒
• 🔒

CPE 2.2info

• 🔒
• 🔒
• 🔒

CVSSv4info

CVSSv3info

CVSSv2info

Exploitinginfo

Threat Intelligenceinfo

Countermeasuresinfo

Timelineinfo

Sourcesinfo

Entryinfo

If you want to get best quality of vulnerability data, you may have to visit VulDB.

Discussion