Linux Kernel up to 6.1.39/6.4.4 perf drivers/perf/riscv_pmu.c riscv_pmu_start privilege escalation

Summaryinfo

A vulnerability has been found in Linux Kernel up to 6.1.39/6.4.4 and classified as critical. The affected element is the function riscv_pmu_start of the file drivers/perf/riscv_pmu.c of the component perf. The manipulation leads to an unknown weakness. This vulnerability is listed as CVE-2023-53583. There is no available exploit. The affected component should be upgraded.

Detailsinfo

A vulnerability was found in Linux Kernel up to 6.1.39/6.4.4. It has been rated as critical. This issue affects the function riscv_pmu_start of the file drivers/perf/riscv_pmu.c of the component perf. The impact remains unknown. The summary by CVE is:

In the Linux kernel, the following vulnerability has been resolved: perf: RISC-V: Remove PERF_HES_STOPPED flag checking in riscv_pmu_start() Since commit 096b52fd2bb4 ("perf: RISC-V: throttle perf events") the perf_sample_event_took() function was added to report time spent in overflow interrupts. If the interrupt takes too long, the perf framework will lower the sysctl_perf_event_sample_rate and max_samples_per_tick. When hwc->interrupts is larger than max_samples_per_tick, the hwc->interrupts will be set to MAX_INTERRUPTS, and events will be throttled within the __perf_event_account_interrupt() function. However, the RISC-V PMU driver doesn't call riscv_pmu_stop() to update the PERF_HES_STOPPED flag after perf_event_overflow() in pmu_sbi_ovf_handler() function to avoid throttling. When the perf framework unthrottled the event in the timer interrupt handler, it triggers riscv_pmu_start() function and causes a WARN_ON_ONCE() warning, as shown below: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 240 at drivers/perf/riscv_pmu.c:184 riscv_pmu_start+0x7c/0x8e Modules linked in: CPU: 0 PID: 240 Comm: ls Not tainted 6.4-rc4-g19d0788e9ef2 #1 Hardware name: SiFive (DT) epc : riscv_pmu_start+0x7c/0x8e ra : riscv_pmu_start+0x28/0x8e epc : ffffffff80aef864 ra : ffffffff80aef810 sp : ffff8f80004db6f0 gp : ffffffff81c83750 tp : ffffaf80069f9bc0 t0 : ffff8f80004db6c0 t1 : 0000000000000000 t2 : 000000000000001f s0 : ffff8f80004db720 s1 : ffffaf8008ca1068 a0 : 0000ffffffffffff a1 : 0000000000000000 a2 : 0000000000000001 a3 : 0000000000000870 a4 : 0000000000000000 a5 : 0000000000000000 a6 : 0000000000000840 a7 : 0000000000000030 s2 : 0000000000000000 s3 : ffffaf8005165800 s4 : ffffaf800424da00 s5 : ffffffffffffffff s6 : ffffffff81cc7590 s7 : 0000000000000000 s8 : 0000000000000006 s9 : 0000000000000001 s10: ffffaf807efbc340 s11: ffffaf807efbbf00 t3 : ffffaf8006a16028 t4 : 00000000dbfbb796 t5 : 0000000700000000 t6 : ffffaf8005269870 status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003 [<ffffffff80aef864>] riscv_pmu_start+0x7c/0x8e [<ffffffff80185b56>] perf_adjust_freq_unthr_context+0x15e/0x174 [<ffffffff80188642>] perf_event_task_tick+0x88/0x9c [<ffffffff800626a8>] scheduler_tick+0xfe/0x27c [<ffffffff800b5640>] update_process_times+0x9a/0xba [<ffffffff800c5bd4>] tick_sched_handle+0x32/0x66 [<ffffffff800c5e0c>] tick_sched_timer+0x64/0xb0 [<ffffffff800b5e50>] __hrtimer_run_queues+0x156/0x2f4 [<ffffffff800b6bdc>] hrtimer_interrupt+0xe2/0x1fe [<ffffffff80acc9e8>] riscv_timer_interrupt+0x38/0x42 [<ffffffff80090a16>] handle_percpu_devid_irq+0x90/0x1d2 [<ffffffff8008a9f4>] generic_handle_domain_irq+0x28/0x36 After referring other PMU drivers like Arm, Loongarch, Csky, and Mips, they don't call *_pmu_stop() to update with PERF_HES_STOPPED flag after perf_event_overflow() function nor do they add PERF_HES_STOPPED flag checking in *_pmu_start() which don't cause this warning. Thus, it's recommended to remove this unnecessary check in riscv_pmu_start() function to prevent this warning.

The advisory is shared at git.kernel.org. The identification of this vulnerability is CVE-2023-53583 since 10/04/2025. The exploitation is known to be difficult. Technical details are known, but no exploit is available.

Upgrading to version 6.1.40 or 6.4.5 eliminates this vulnerability. Applying the patch aeb62beaf9cbd0a72e7f97c9af6d3e7f76ce2946/8270d539a943d00cf6a094da0073e2b5972b641d/66843b14fb71825fdd73ab12f6594f2243b402be is able to eliminate this problem. The bugfix is ready for download at git.kernel.org. The best possible mitigation is suggested to be upgrading to the latest version.

The vulnerability is also documented in the databases at EUVD (EUVD-2023-60025) and CERT Bund (WID-SEC-2025-2194). Several companies clearly confirm that VulDB is the primary source for best vulnerability data.

Affected

• Google Container-Optimized OS
• Debian Linux
• Google Cloud Platform
• Amazon Linux 2
• Red Hat Enterprise Linux
• Ubuntu Linux
• SUSE Linux
• Oracle Linux
• SUSE openSUSE
• Open Source Linux Kernel
• RESF Rocky Linux
• NetApp ActiveIQ Unified Manager
• IBM QRadar SIEM
• Dell NetWorker

Productinfo

Type

• Operating System

Vendor

• Linux

Name

• Kernel

Version

• 6.1.0
• 6.1.1
• 6.1.2
• 6.1.3
• 6.1.4
• 6.1.5
• 6.1.6
• 6.1.7
• 6.1.8
• 6.1.9
• 6.1.10
• 6.1.11
• 6.1.12
• 6.1.13
• 6.1.14
• 6.1.15
• 6.1.16
• 6.1.17
• 6.1.18
• 6.1.19
• 6.1.20
• 6.1.21
• 6.1.22
• 6.1.23
• 6.1.24
• 6.1.25
• 6.1.26
• 6.1.27
• 6.1.28
• 6.1.29
• 6.1.30
• 6.1.31
• 6.1.32
• 6.1.33
• 6.1.34
• 6.1.35
• 6.1.36
• 6.1.37
• 6.1.38
• 6.1.39
• 6.4.0
• 6.4.1
• 6.4.2
• 6.4.3
• 6.4.4

License

• open-source

Website

• Vendor: https://www.kernel.org/

CPE 2.3info

• 🔒
• 🔒
• 🔒

CPE 2.2info

• 🔒
• 🔒
• 🔒

CVSSv4info

CVSSv3info

CVSSv2info

Exploitinginfo

Threat Intelligenceinfo

Countermeasuresinfo

Timelineinfo

Sourcesinfo

Entryinfo

Several companies clearly confirm that VulDB is the primary source for best vulnerability data.

Discussion