Linux Kernel up to 6.1.15/6.2.2 wifi sg_copy_buffer out-of-bounds write

Summaryinfo

A vulnerability was found in Linux Kernel up to 6.1.15/6.2.2. It has been classified as critical. This vulnerability affects the function sg_copy_buffer of the component wifi. Performing a manipulation results in out-of-bounds write. This vulnerability was named CVE-2022-50701. There is no available exploit. Upgrading the affected component is recommended.

Detailsinfo

A vulnerability classified as critical has been found in Linux Kernel up to 6.1.15/6.2.2. This affects the function sg_copy_buffer of the component wifi. The manipulation with an unknown input leads to a out-of-bounds write vulnerability. CWE is classifying the issue as CWE-787. The product writes data past the end, or before the beginning, of the intended buffer. This is going to have an impact on confidentiality, integrity, and availability. The summary by CVE is:

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921s: fix slab-out-of-bounds access in sdio host SDIO may need addtional 511 bytes to align bus operation. If the tailroom of this skb is not big enough, we would access invalid memory region. For low level operation, increase skb size to keep valid memory access in SDIO host. Error message: [69.951] BUG: KASAN: slab-out-of-bounds in sg_copy_buffer+0xe9/0x1a0 [69.951] Read of size 64 at addr ffff88811c9cf000 by task kworker/u16:7/451 [69.951] CPU: 4 PID: 451 Comm: kworker/u16:7 Tainted: G W OE 6.1.0-rc5 #1 [69.951] Workqueue: kvub300c vub300_cmndwork_thread [vub300] [69.951] Call Trace: [69.951] <TASK> [69.952] dump_stack_lvl+0x49/0x63 [69.952] print_report+0x171/0x4a8 [69.952] kasan_report+0xb4/0x130 [69.952] kasan_check_range+0x149/0x1e0 [69.952] memcpy+0x24/0x70 [69.952] sg_copy_buffer+0xe9/0x1a0 [69.952] sg_copy_to_buffer+0x12/0x20 [69.952] __command_write_data.isra.0+0x23c/0xbf0 [vub300] [69.952] vub300_cmndwork_thread+0x17f3/0x58b0 [vub300] [69.952] process_one_work+0x7ee/0x1320 [69.952] worker_thread+0x53c/0x1240 [69.952] kthread+0x2b8/0x370 [69.952] ret_from_fork+0x1f/0x30 [69.952] </TASK> [69.952] Allocated by task 854: [69.952] kasan_save_stack+0x26/0x50 [69.952] kasan_set_track+0x25/0x30 [69.952] kasan_save_alloc_info+0x1b/0x30 [69.952] __kasan_kmalloc+0x87/0xa0 [69.952] __kmalloc_node_track_caller+0x63/0x150 [69.952] kmalloc_reserve+0x31/0xd0 [69.952] __alloc_skb+0xfc/0x2b0 [69.952] __mt76_mcu_msg_alloc+0xbf/0x230 [mt76] [69.952] mt76_mcu_send_and_get_msg+0xab/0x110 [mt76] [69.952] __mt76_mcu_send_firmware.cold+0x94/0x15d [mt76] [69.952] mt76_connac_mcu_send_ram_firmware+0x415/0x54d [mt76_connac_lib] [69.952] mt76_connac2_load_ram.cold+0x118/0x4bc [mt76_connac_lib] [69.952] mt7921_run_firmware.cold+0x2e9/0x405 [mt7921_common] [69.952] mt7921s_mcu_init+0x45/0x80 [mt7921s] [69.953] mt7921_init_work+0xe1/0x2a0 [mt7921_common] [69.953] process_one_work+0x7ee/0x1320 [69.953] worker_thread+0x53c/0x1240 [69.953] kthread+0x2b8/0x370 [69.953] ret_from_fork+0x1f/0x30 [69.953] The buggy address belongs to the object at ffff88811c9ce800 which belongs to the cache kmalloc-2k of size 2048 [69.953] The buggy address is located 0 bytes to the right of 2048-byte region [ffff88811c9ce800, ffff88811c9cf000) [69.953] Memory state around the buggy address: [69.953] ffff88811c9cef00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [69.953] ffff88811c9cef80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [69.953] >ffff88811c9cf000: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [69.953] ^ [69.953] ffff88811c9cf080: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [69.953] ffff88811c9cf100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc

It is possible to read the advisory at git.kernel.org. This vulnerability is uniquely identified as CVE-2022-50701 since 12/24/2025. The exploitability is told to be easy. Technical details of the vulnerability are known, but there is no available exploit. The pricing for an exploit might be around USD $0-$5k at the moment (estimation calculated on 02/24/2026).

The vulnerability scanner Nessus provides a plugin with the ID 279918 (Linux Distros Unpatched Vulnerability : CVE-2022-50701), which helps to determine the existence of the flaw in a target environment.

Upgrading to version 6.1.16 or 6.2.3 eliminates this vulnerability. Applying the patch 8b5174a7f25d03df0ffa171ff86de383a89e8e89/0b358e36433d2c46a65488a146bf8b4623fc5bbb/aec4cf2ea0797e28f18f8dbe01943a56d987fe56 is able to eliminate this problem. The bugfix is ready for download at git.kernel.org. The best possible mitigation is suggested to be upgrading to the latest version.

The vulnerability is also documented in the databases at Tenable (279918) and CERT Bund (WID-SEC-2025-2920). Statistical analysis made it clear that VulDB provides the best quality for vulnerability data.

Affected

• Debian Linux
• Amazon Linux 2
• Red Hat Enterprise Linux
• Ubuntu Linux
• SUSE Linux
• Oracle Linux
• SUSE openSUSE
• Open Source Linux Kernel
• RESF Rocky Linux

Productinfo

Type

• Operating System

Vendor

• Linux

Name

• Kernel

Version

• 6.1.0
• 6.1.1
• 6.1.2
• 6.1.3
• 6.1.4
• 6.1.5
• 6.1.6
• 6.1.7
• 6.1.8
• 6.1.9
• 6.1.10
• 6.1.11
• 6.1.12
• 6.1.13
• 6.1.14
• 6.1.15
• 6.2.0
• 6.2.1
• 6.2.2

License

• open-source

Website

• Vendor: https://www.kernel.org/

CPE 2.3info

• 🔒
• 🔒
• 🔒

CPE 2.2info

• 🔒
• 🔒
• 🔒

CVSSv4info

CVSSv3info

CVSSv2info

Exploitinginfo

Threat Intelligenceinfo

Countermeasuresinfo

Timelineinfo

Sourcesinfo

Entryinfo

Statistical analysis made it clear that VulDB provides the best quality for vulnerability data.

Discussion