Linux Kernel up to 5.19.16/6.0.2 scsi pm8001_dev_gone_notify state issue

Summaryinfo

A vulnerability labeled as critical has been found in Linux Kernel up to 5.19.16/6.0.2. This impacts the function pm8001_dev_gone_notify of the component scsi. The manipulation results in state issue. This vulnerability is cataloged as CVE-2022-50818. There is no exploit available. The affected component should be upgraded.

Detailsinfo

A vulnerability, which was classified as critical, was found in Linux Kernel up to 5.19.16/6.0.2. Affected is the function pm8001_dev_gone_notify of the component scsi. The manipulation with an unknown input leads to a state issue vulnerability. CWE is classifying the issue as CWE-371. The impact remains unknown. CVE summarizes:

In the Linux kernel, the following vulnerability has been resolved: scsi: pm8001: Fix running_req for internal abort commands Disabling the remote phy for a SATA disk causes a hang: root@(none)$ more /sys/class/sas_phy/phy-0:0:8/target_port_protocols sata root@(none)$ echo 0 > sys/class/sas_phy/phy-0:0:8/enable root@(none)$ [ 67.855950] sas: ex 500e004aaaaaaa1f phy08 change count has changed [ 67.920585] sd 0:0:2:0: [sdc] Synchronizing SCSI cache [ 67.925780] sd 0:0:2:0: [sdc] Synchronize Cache(10) failed: Result: hostbyte=0x04 driverbyte=DRIVER_OK [ 67.935094] sd 0:0:2:0: [sdc] Stopping disk [ 67.939305] sd 0:0:2:0: [sdc] Start/Stop Unit failed: Result: hostbyte=0x04 driverbyte=DRIVER_OK ... [ 123.998998] INFO: task kworker/u192:1:642 blocked for more than 30 seconds. [ 124.005960] Not tainted 6.0.0-rc1-205202-gf26f8f761e83 #218 [ 124.012049] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 124.019872] task:kworker/u192:1 state:D stack:0 pid: 642 ppid: 2 flags:0x00000008 [ 124.028223] Workqueue: 0000:04:00.0_event_q sas_port_event_worker [ 124.034319] Call trace: [ 124.036758] __switch_to+0x128/0x278 [ 124.040333] __schedule+0x434/0xa58 [ 124.043820] schedule+0x94/0x138 [ 124.047045] schedule_timeout+0x2fc/0x368 [ 124.051052] wait_for_completion+0xdc/0x200 [ 124.055234] __flush_workqueue+0x1a8/0x708 [ 124.059328] sas_porte_broadcast_rcvd+0xa8/0xc0 [ 124.063858] sas_port_event_worker+0x60/0x98 [ 124.068126] process_one_work+0x3f8/0x660 [ 124.072134] worker_thread+0x70/0x700 [ 124.075793] kthread+0x1a4/0x1b8 [ 124.079014] ret_from_fork+0x10/0x20 The issue is that the per-device running_req read in pm8001_dev_gone_notify() never goes to zero and we never make progress. This is caused by missing accounting for running_req for when an internal abort command completes. In commit 2cbbf489778e ("scsi: pm8001: Use libsas internal abort support") we started to send internal abort commands as a proper sas_task. In this when we deliver a sas_task to HW the per-device running_req is incremented in pm8001_queue_command(). However it is never decremented for internal abort commnds, so decrement in pm8001_mpi_task_abort_resp().

The advisory is available at git.kernel.org. This vulnerability is traded as CVE-2022-50818 since 12/30/2025. The exploitability is told to be difficult. Technical details are known, but there is no available exploit. The structure of the vulnerability defines a possible price range of USD $0-$5k at the moment (estimation calculated on 01/06/2026).

The vulnerability scanner Nessus provides a plugin with the ID 281683 (Linux Distros Unpatched Vulnerability : CVE-2022-50818), which helps to determine the existence of the flaw in a target environment.

Upgrading to version 5.19.17 or 6.0.3 eliminates this vulnerability. Applying the patch 4e750e0d8e486569fcb7f4ba6f6471673ce7d8a2/a62b9fc9775fbc8e666bb328f6e53c168054d6fe/d8c22c4697c11ed28062afe3c2b377025be11a23 is able to eliminate this problem. The bugfix is ready for download at git.kernel.org. The best possible mitigation is suggested to be upgrading to the latest version.

The vulnerability is also documented in the vulnerability database at Tenable (281683). If you want to get best quality of vulnerability data, you may have to visit VulDB.

Productinfo

Type

• Operating System

Vendor

• Linux

Name

• Kernel

Version

• 5.19.0
• 5.19.1
• 5.19.2
• 5.19.3
• 5.19.4
• 5.19.5
• 5.19.6
• 5.19.7
• 5.19.8
• 5.19.9
• 5.19.10
• 5.19.11
• 5.19.12
• 5.19.13
• 5.19.14
• 5.19.15
• 5.19.16
• 6.0.0
• 6.0.1
• 6.0.2

License

• open-source

Website

• Vendor: https://www.kernel.org/

CPE 2.3info

• 🔒
• 🔒
• 🔒

CPE 2.2info

• 🔒
• 🔒
• 🔒

CVSSv4info

CVSSv3info

CVSSv2info

Exploitinginfo

Threat Intelligenceinfo

Countermeasuresinfo

Timelineinfo

Sourcesinfo

Entryinfo

If you want to get best quality of vulnerability data, you may have to visit VulDB.

Discussion