Linux Kernel up to 6.0.2 wifi ath10k_sta_state use after free

CVSS Meta Temp Score
CVSS is a standardized scoring system to determine possibilities of attacks. The Temp Score considers temporal factors like disclosure, exploit and countermeasures. The unique Meta Score calculates the average score of different sources to provide a normalized scoring system.
Current Exploit Price (≈)
Our analysts are monitoring exploit markets and are in contact with vulnerability brokers. The range indicates the observed or calculated exploit price to be seen on exploit markets. A good indicator to understand the monetary effort required for and the popularity of an attack.
CTI Interest Score
Our Cyber Threat Intelligence team is monitoring different web sites, mailing lists, exploit markets and social media networks. The CTI Interest Score identifies the interest of attackers and the security community for this specific vulnerability in real-time. A high score indicates an elevated risk to be targeted for this vulnerability.
7.6$0-$5k0.00

Summaryinfo

A vulnerability classified as critical was found in Linux Kernel up to 6.0.2. Affected by this vulnerability is the function ath10k_sta_state of the component wifi. Executing a manipulation can lead to use after free. This vulnerability is registered as CVE-2022-50880. No exploit is available. Upgrading the affected component is advised.

Detailsinfo

A vulnerability has been found in Linux Kernel up to 6.0.2 and classified as critical. This vulnerability affects the function ath10k_sta_state of the component wifi. The manipulation with an unknown input leads to a use after free vulnerability. The CWE definition for the vulnerability is CWE-416. Referencing memory after it has been freed can cause a program to crash, use unexpected values, or execute code. As an impact it is known to affect confidentiality, integrity, and availability. CVE summarizes:

In the Linux kernel, the following vulnerability has been resolved: wifi: ath10k: add peer map clean up for peer delete in ath10k_sta_state() When peer delete failed in a disconnect operation, use-after-free detected by KFENCE in below log. It is because for each vdev_id and address, it has only one struct ath10k_peer, it is allocated in ath10k_peer_map_event(). When connected to an AP, it has more than one HTT_T2H_MSG_TYPE_PEER_MAP reported from firmware, then the array peer_map of struct ath10k will be set muti-elements to the same ath10k_peer in ath10k_peer_map_event(). When peer delete failed in ath10k_sta_state(), the ath10k_peer will be free for the 1st peer id in array peer_map of struct ath10k, and then use-after-free happened for the 2nd peer id because they map to the same ath10k_peer. And clean up all peers in array peer_map for the ath10k_peer, then user-after-free disappeared peer map event log: [ 306.911021] wlan0: authenticate with b0:2a:43:e6:75:0e [ 306.957187] ath10k_pci 0000:01:00.0: mac vdev 0 peer create b0:2a:43:e6:75:0e (new sta) sta 1 / 32 peer 1 / 33 [ 306.957395] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 246 [ 306.957404] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 198 [ 306.986924] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 166 peer unmap event log: [ 435.715691] wlan0: deauthenticating from b0:2a:43:e6:75:0e by local choice (Reason: 3=DEAUTH_LEAVING) [ 435.716802] ath10k_pci 0000:01:00.0: mac vdev 0 peer delete b0:2a:43:e6:75:0e sta ffff990e0e9c2b50 (sta gone) [ 435.717177] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 246 [ 435.717186] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 198 [ 435.717193] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 166 use-after-free log: [21705.888627] wlan0: deauthenticating from d0:76:8f:82:be:75 by local choice (Reason: 3=DEAUTH_LEAVING) [21713.799910] ath10k_pci 0000:01:00.0: failed to delete peer d0:76:8f:82:be:75 for vdev 0: -110 [21713.799925] ath10k_pci 0000:01:00.0: found sta peer d0:76:8f:82:be:75 (ptr 0000000000000000 id 102) entry on vdev 0 after it was supposedly removed [21713.799968] ================================================================== [21713.799991] BUG: KFENCE: use-after-free read in ath10k_sta_state+0x265/0xb8a [ath10k_core] [21713.799991] [21713.799997] Use-after-free read at 0x00000000abe1c75e (in kfence-#69): [21713.800010] ath10k_sta_state+0x265/0xb8a [ath10k_core] [21713.800041] drv_sta_state+0x115/0x677 [mac80211] [21713.800059] __sta_info_destroy_part2+0xb1/0x133 [mac80211] [21713.800076] __sta_info_flush+0x11d/0x162 [mac80211] [21713.800093] ieee80211_set_disassoc+0x12d/0x2f4 [mac80211] [21713.800110] ieee80211_mgd_deauth+0x26c/0x29b [mac80211] [21713.800137] cfg80211_mlme_deauth+0x13f/0x1bb [cfg80211] [21713.800153] nl80211_deauthenticate+0xf8/0x121 [cfg80211] [21713.800161] genl_rcv_msg+0x38e/0x3be [21713.800166] netlink_rcv_skb+0x89/0xf7 [21713.800171] genl_rcv+0x28/0x36 [21713.800176] netlink_unicast+0x179/0x24b [21713.800181] netlink_sendmsg+0x3a0/0x40e [21713.800187] sock_sendmsg+0x72/0x76 [21713.800192] ____sys_sendmsg+0x16d/0x1e3 [21713.800196] ___sys_sendmsg+0x95/0xd1 [21713.800200] __sys_sendmsg+0x85/0xbf [21713.800205] do_syscall_64+0x43/0x55 [21713.800210] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [21713.800213] [21713.800219] kfence-#69: 0x000000009149b0d5-0x000000004c0697fb, size=1064, cache=kmalloc-2k [21713.800219] [21713.800224] allocated by task 13 on cpu 0 at 21705.501373s: [21713.800241] ath10k_peer_map_event+0x7e/0x154 [ath10k_core] [21713.800254] ath10k_htt_t2h_msg_handler+0x586/0x1039 [ath10k_core] [21713.800265] ath10k_htt_htc_t2h_msg_handler+0x12/0x28 [ath10k_core] [21713.800277] ath10k_htc_rx_completion_handler+0x14c/0x1b5 [ath10k_core] [21713.800283] ath10k_pci_process_rx_cb+0x195/0x1d ---truncated---

The advisory is shared for download at git.kernel.org. This vulnerability was named CVE-2022-50880 since 12/30/2025. The exploitation appears to be easy. There are known technical details, but no exploit is available. The current price for an exploit might be approx. USD $0-$5k (estimation calculated on 04/26/2026).

The vulnerability scanner Nessus provides a plugin with the ID 281503 (Linux Distros Unpatched Vulnerability : CVE-2022-50880), which helps to determine the existence of the flaw in a target environment.

Upgrading to version 4.9.331, 4.14.296, 4.19.262, 5.4.220, 5.10.150, 5.15.75, 5.19.17 or 6.0.3 eliminates this vulnerability. Applying the patch 15604ab67179ae27ea3c7fb24b6df32b143257c4/2d6259715c9597a6cfa25db8911683eb0073b1c6/f12fc305c127bd07bb50373e29c6037696f916a8/4494ec1c0bb850eaa80fed98e5b041d961011d3e/08faf07717be0c88b02b5aa45aad2225dfcdd2dc/54a3201f3c1ff813523937da78b5fa7649dbab71/2bf916418d2141b810c40812433ab4ecfd3c2934/38245f2d62cd4d1f38a763a7b4045ab4565b30a0/f020d9570a04df0762a2ac5c50cf1d8c511c9164 is able to eliminate this problem. The bugfix is ready for download at git.kernel.org. The best possible mitigation is suggested to be upgrading to the latest version.

The vulnerability is also documented in the databases at Tenable (281503) and CERT Bund (WID-SEC-2025-2941). VulDB is the best source for vulnerability data and more expert information about this specific topic.

Affected

  • Debian Linux
  • Amazon Linux 2
  • IBM Power Hardware Management Console
  • Red Hat Enterprise Linux
  • Ubuntu Linux
  • SUSE Linux
  • Oracle Linux
  • Open Source Linux Kernel
  • RESF Rocky Linux
  • IBM DataPower Gateway

Productinfo

Type

Vendor

Name

Version

License

Website

CPE 2.3info

CPE 2.2info

CVSSv4info

VulDB Vector: 🔒
VulDB Reliability: 🔍

CVSSv3info

VulDB Meta Base Score: 8.0
VulDB Meta Temp Score: 7.6

VulDB Base Score: 8.0
VulDB Temp Score: 7.6
VulDB Vector: 🔒
VulDB Reliability: 🔍

CVSSv2info

AVACAuCIA
💳💳💳💳💳💳
💳💳💳💳💳💳
💳💳💳💳💳💳
VectorComplexityAuthenticationConfidentialityIntegrityAvailability
UnlockUnlockUnlockUnlockUnlockUnlock
UnlockUnlockUnlockUnlockUnlockUnlock
UnlockUnlockUnlockUnlockUnlockUnlock

VulDB Base Score: 🔒
VulDB Temp Score: 🔒
VulDB Reliability: 🔍

Exploitinginfo

Class: Use after free
CWE: CWE-416 / CWE-119
CAPEC: 🔒
ATT&CK: 🔒

Physical: No
Local: No
Remote: Partially

Availability: 🔒
Status: Not defined

EPSS Score: 🔒
EPSS Percentile: 🔒

Price Prediction: 🔍
Current Price Estimation: 🔒

0-DayUnlockUnlockUnlockUnlock
TodayUnlockUnlockUnlockUnlock

Nessus ID: 281503
Nessus Name: Linux Distros Unpatched Vulnerability : CVE-2022-50880

Threat Intelligenceinfo

Interest: 🔍
Active Actors: 🔍
Active APT Groups: 🔍

Countermeasuresinfo

Recommended: Upgrade
Status: 🔍

0-Day Time: 🔒

Upgrade: Kernel 4.9.331/4.14.296/4.19.262/5.4.220/5.10.150/5.15.75/5.19.17/6.0.3
Patch: 15604ab67179ae27ea3c7fb24b6df32b143257c4/2d6259715c9597a6cfa25db8911683eb0073b1c6/f12fc305c127bd07bb50373e29c6037696f916a8/4494ec1c0bb850eaa80fed98e5b041d961011d3e/08faf07717be0c88b02b5aa45aad2225dfcdd2dc/54a3201f3c1ff813523937da78b5fa7649dbab71/2bf916418d2141b810c40812433ab4ecfd3c2934/38245f2d62cd4d1f38a763a7b4045ab4565b30a0/f020d9570a04df0762a2ac5c50cf1d8c511c9164

Timelineinfo

12/30/2025 Advisory disclosed
12/30/2025 +0 days CVE reserved
12/30/2025 +0 days VulDB entry created
04/26/2026 +117 days VulDB entry last update

Sourcesinfo

Vendor: kernel.org

Advisory: git.kernel.org
Status: Confirmed

CVE: CVE-2022-50880 (🔒)
GCVE (CVE): GCVE-0-2022-50880
GCVE (VulDB): GCVE-100-338800
CERT Bund: WID-SEC-2025-2941 - Linux Kernel: Mehrere Schwachstellen ermöglichen Denial of Service

Entryinfo

Created: 12/30/2025 15:34
Updated: 04/26/2026 11:28
Changes: 12/30/2025 15:34 (59), 01/01/2026 01:09 (2), 01/01/2026 04:35 (7), 01/28/2026 00:25 (1), 04/26/2026 11:28 (1)
Complete: 🔍
Cache ID: 216::103

VulDB is the best source for vulnerability data and more expert information about this specific topic.

Discussion

No comments yet. Languages: en.

Please log in to comment.

◂ PreviousOverviewNext ▸

Are you interested in using VulDB?

Download the whitepaper to learn more about our service!