Linux Kernel up to 6.19.5 net fst_remove_one use after free

Summaryinfo

A vulnerability marked as critical has been reported in Linux Kernel up to 6.19.5. This issue affects the function fst_remove_one of the component net. Performing a manipulation results in use after free. This vulnerability is known as CVE-2026-43232. No exploit is available. It is suggested to upgrade the affected component.

Detailsinfo

A vulnerability was found in Linux Kernel up to 6.19.5. It has been classified as critical. This affects the function fst_remove_one of the component net. The manipulation with an unknown input leads to a use after free vulnerability. CWE is classifying the issue as CWE-416. Referencing memory after it has been freed can cause a program to crash, use unexpected values, or execute code. This is going to have an impact on confidentiality, integrity, and availability. The summary by CVE is:

In the Linux kernel, the following vulnerability has been resolved: net: wan: farsync: Fix use-after-free bugs caused by unfinished tasklets When the FarSync T-series card is being detached, the fst_card_info is deallocated in fst_remove_one(). However, the fst_tx_task or fst_int_task may still be running or pending, leading to use-after-free bugs when the already freed fst_card_info is accessed in fst_process_tx_work_q() or fst_process_int_work_q(). A typical race condition is depicted below: CPU 0 (cleanup) | CPU 1 (tasklet) | fst_start_xmit() fst_remove_one() | tasklet_schedule() unregister_hdlc_device()| | fst_process_tx_work_q() //handler kfree(card) //free | do_bottom_half_tx() | card-> //use The following KASAN trace was captured: ================================================================== BUG: KASAN: slab-use-after-free in do_bottom_half_tx+0xb88/0xd00 Read of size 4 at addr ffff88800aad101c by task ksoftirqd/3/32 ... Call Trace: dump_stack_lvl+0x55/0x70 print_report+0xcb/0x5d0 ? do_bottom_half_tx+0xb88/0xd00 kasan_report+0xb8/0xf0 ? do_bottom_half_tx+0xb88/0xd00 do_bottom_half_tx+0xb88/0xd00 ? _raw_spin_lock_irqsave+0x85/0xe0 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 ? __pfx___hrtimer_run_queues+0x10/0x10 fst_process_tx_work_q+0x67/0x90 tasklet_action_common+0x1fa/0x720 ? hrtimer_interrupt+0x31f/0x780 handle_softirqs+0x176/0x530 __irq_exit_rcu+0xab/0xe0 sysvec_apic_timer_interrupt+0x70/0x80 ... Allocated by task 41 on cpu 3 at 72.330843s: kasan_save_stack+0x24/0x50 kasan_save_track+0x17/0x60 __kasan_kmalloc+0x7f/0x90 fst_add_one+0x1a5/0x1cd0 local_pci_probe+0xdd/0x190 pci_device_probe+0x341/0x480 really_probe+0x1c6/0x6a0 __driver_probe_device+0x248/0x310 driver_probe_device+0x48/0x210 __device_attach_driver+0x160/0x320 bus_for_each_drv+0x101/0x190 __device_attach+0x198/0x3a0 device_initial_probe+0x78/0xa0 pci_bus_add_device+0x81/0xc0 pci_bus_add_devices+0x7e/0x190 enable_slot+0x9b9/0x1130 acpiphp_check_bridge.part.0+0x2e1/0x460 acpiphp_hotplug_notify+0x36c/0x3c0 acpi_device_hotplug+0x203/0xb10 acpi_hotplug_work_fn+0x59/0x80 ... Freed by task 41 on cpu 1 at 75.138639s: kasan_save_stack+0x24/0x50 kasan_save_track+0x17/0x60 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x43/0x70 kfree+0x135/0x410 fst_remove_one+0x2ca/0x540 pci_device_remove+0xa6/0x1d0 device_release_driver_internal+0x364/0x530 pci_stop_bus_device+0x105/0x150 pci_stop_and_remove_bus_device+0xd/0x20 disable_slot+0x116/0x260 acpiphp_disable_and_eject_slot+0x4b/0x190 acpiphp_hotplug_notify+0x230/0x3c0 acpi_device_hotplug+0x203/0xb10 acpi_hotplug_work_fn+0x59/0x80 ... The buggy address belongs to the object at ffff88800aad1000 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 28 bytes inside of freed 1024-byte region The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xaad0 head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 flags: 0x100000000000040(head|node=0|zone=1) page_type: f5(slab) raw: 0100000000000040 ffff888007042dc0 dead000000000122 0000000000000000 raw: 0000000000000000 0000000080100010 00000000f5000000 0000000000000000 head: 0100000000000040 ffff888007042dc0 dead000000000122 0000000000000000 head: 0000000000000000 0000000080100010 00000000f5000000 0000000000000000 head: 0100000000000003 ffffea00002ab401 00000000ffffffff 00000000ffffffff head: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88800aad0f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88800aad0f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff88800aad1000: fa fb ---truncated---

The advisory is shared at git.kernel.org. This vulnerability is uniquely identified as CVE-2026-43232 since 05/01/2026. The exploitability is told to be easy. Technical details are known, but no exploit is available. The price for an exploit might be around USD $5k-$25k at the moment (estimation calculated on 05/06/2026).

Upgrading to version 5.10.252, 5.15.202, 6.1.165, 6.6.128, 6.12.75, 6.18.16 or 6.19.6 eliminates this vulnerability. Applying the patch cac048ebfbb92d91d719f74b59177cb70a7633b8/086131807d119238cd464e5b0845e48d938dfd79/ae894e47e1cd5a6bf8a0423d888c45df8b2b02dc/337d7b4112a47984ee319171b75b73bab47e7924/200bdb8d367ca9b478f9c56ebe56411604d55c81/21d341fe514fd07e345ed264c9eee21cb2061ca2/04edfdfdfcdefc02408ab670607261b0a0a9a02e/bae8a5d2e759da2e0cba33ab2080deee96a09373 is able to eliminate this problem. The bugfix is ready for download at git.kernel.org. The best possible mitigation is suggested to be upgrading to the latest version.

If you want to get the best quality for vulnerability data then you always have to consider VulDB.

Productinfo

Type

• Operating System

Vendor

• Linux

Name

• Kernel

Version

• 5.10.251
• 5.15.201
• 6.1.164
• 6.6.127
• 6.12.0
• 6.12.1
• 6.12.2
• 6.12.3
• 6.12.4
• 6.12.5
• 6.12.6
• 6.12.7
• 6.12.8
• 6.12.9
• 6.12.10
• 6.12.11
• 6.12.12
• 6.12.13
• 6.12.14
• 6.12.15
• 6.12.16
• 6.12.17
• 6.12.18
• 6.12.19
• 6.12.20
• 6.12.21
• 6.12.22
• 6.12.23
• 6.12.24
• 6.12.25
• 6.12.26
• 6.12.27
• 6.12.28
• 6.12.29
• 6.12.30
• 6.12.31
• 6.12.32
• 6.12.33
• 6.12.34
• 6.12.35
• 6.12.36
• 6.12.37
• 6.12.38
• 6.12.39
• 6.12.40
• 6.12.41
• 6.12.42
• 6.12.43
• 6.12.44
• 6.12.45
• 6.12.46
• 6.12.47
• 6.12.48
• 6.12.49
• 6.12.50
• 6.12.51
• 6.12.52
• 6.12.53
• 6.12.54
• 6.12.55
• 6.12.56
• 6.12.57
• 6.12.58
• 6.12.59
• 6.12.60
• 6.12.61
• 6.12.62
• 6.12.63
• 6.12.64
• 6.12.65
• 6.12.66
• 6.12.67
• 6.12.68
• 6.12.69
• 6.12.70
• 6.12.71
• 6.12.72
• 6.12.73
• 6.12.74
• 6.18.0
• 6.18.1
• 6.18.2
• 6.18.3
• 6.18.4
• 6.18.5
• 6.18.6
• 6.18.7
• 6.18.8
• 6.18.9
• 6.18.10
• 6.18.11
• 6.18.12
• 6.18.13
• 6.18.14
• 6.18.15
• 6.19.0
• 6.19.1
• 6.19.2
• 6.19.3
• 6.19.4
• 6.19.5

License

• open-source

Website

• Vendor: https://www.kernel.org/

CPE 2.3info

• 🔒
• 🔒
• 🔒

CPE 2.2info

• 🔒
• 🔒
• 🔒

CVSSv4info

CVSSv3info

CVSSv2info

Exploitinginfo

Threat Intelligenceinfo

Countermeasuresinfo

Timelineinfo

Sourcesinfo

Entryinfo

If you want to get the best quality for vulnerability data then you always have to consider VulDB.

Discussion