Linux Kernel up to 7.1-rc2 LoongArch loongson_gpu_fixup_dma_hang stack-based overflow

Summaryinfo

A vulnerability has been found in Linux Kernel up to 6.6.139/6.12.87/6.18.29/7.0.6/7.1-rc2 and classified as critical. This affects the function loongson_gpu_fixup_dma_hang of the component LoongArch. Performing a manipulation results in stack-based overflow. This vulnerability is identified as CVE-2026-46156. There is not any exploit available. The affected component should be upgraded.

Detailsinfo

A vulnerability was found in Linux Kernel up to 6.6.139/6.12.87/6.18.29/7.0.6/7.1-rc2. It has been classified as critical. This affects the function loongson_gpu_fixup_dma_hang of the component LoongArch. The manipulation with an unknown input leads to a stack-based overflow vulnerability. CWE is classifying the issue as CWE-121. A stack-based buffer overflow condition is a condition where the buffer being overwritten is allocated on the stack (i.e., is a local variable or, rarely, a parameter to a function). This is going to have an impact on confidentiality, integrity, and availability. The summary by CVE is:

In the Linux kernel, the following vulnerability has been resolved: LoongArch: Fix potential ADE in loongson_gpu_fixup_dma_hang() The switch case in loongson_gpu_fixup_dma_hang() may not DC2 or DC3, and readl(crtc_reg) will access with random address, because the "device" is from "base+PCI_DEVICE_ID", "base" is from "pdev->devfn+1". This is wrong when my platform inserts a discrete GPU: lspci -tv -[0000:00]-+-00.0 Loongson Technology LLC Hyper Transport Bridge Controller ... +-06.0 Loongson Technology LLC LG100 GPU +-06.2 Loongson Technology LLC Device 7a37 ... Add a default switch case to fix the panic as below: Kernel ade access[#1]: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.6.136-loong64-desktop-hwe+ #4 pc 90000000017e5534 ra 90000000017e54c0 tp 90000001002f8000 sp 90000001002fb6c0 a0 80000efe00003100 a1 0000000000003100 a2 0000000000000000 a3 0000000000000002 a4 90000001002fb6b4 a5 900000087cdb58fd a6 90000000027af000 a7 0000000000000001 t0 00000000000085b9 t1 000000000000ffff t2 0000000000000000 t3 0000000000000000 t4 fffffffffffffffd t5 00000000fffb6d9c t6 0000000000083b00 t7 00000000000070c0 t8 900000087cdb4d94 u0 900000087cdb58fd s9 90000001002fb826 s0 90000000031c12c8 s1 7fffffffffffff00 s2 90000000031c12d0 s3 0000000000002710 s4 0000000000000000 s5 0000000000000000 s6 9000000100053000 s7 7fffffffffffff00 s8 90000000030d4000 ra: 90000000017e54c0 loongson_gpu_fixup_dma_hang+0x40/0x210 ERA: 90000000017e5534 loongson_gpu_fixup_dma_hang+0xb4/0x210 CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) PRMD: 00000004 (PPLV0 +PIE -PWE) EUEN: 00000000 (-FPE -SXE -ASXE -BTE) ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7) ESTAT: 00480000 [ADEM] (IS= ECode=8 EsubCode=1) BADV: 7fffffffffffff00 PRID: 0014d000 (Loongson-64bit, Loongson-3A6000-HV) Modules linked in: Process swapper/0 (pid: 1, threadinfo=(____ptrval____), task=(____ptrval____)) Stack : 0000000000000006 90000001002fb778 90000001002fb704 0000000000000007 0000000016a65700 90000000017e5690 000000000000ffff ffffffffffffffff 900000000209f7c0 9000000100053000 900000000209f7a8 9000000000eebc08 0000000000000000 0000000000000000 0000000000000006 90000001002fb778 90000001000530b8 90000000027af000 0000000000000000 9000000100054000 9000000100053000 9000000000ebb70c 9000000100004c00 9000000004000001 90000001002fb7e4 bae765461f31cb12 0000000000000000 0000000000000000 0000000000000006 90000000027af000 0000000000000030 90000000027af000 900000087cd6f800 9000000100053000 0000000000000000 9000000000ebc560 7a2500147cdaf720 bae765461f31cb12 0000000000000001 0000000000000030 ... Call Trace: [<90000000017e5534>] loongson_gpu_fixup_dma_hang+0xb4/0x210 [<9000000000eebc08>] pci_fixup_device+0x108/0x280 [<9000000000ebb70c>] pci_setup_device+0x24c/0x690 [<9000000000ebc560>] pci_scan_single_device+0xe0/0x140 [<9000000000ebc684>] pci_scan_slot+0xc4/0x280 [<9000000000ebdd00>] pci_scan_child_bus_extend+0x60/0x3f0 [<9000000000f5bc94>] acpi_pci_root_create+0x2b4/0x420 [<90000000017e5e74>] pci_acpi_scan_root+0x2d4/0x440 [<9000000000f5b02c>] acpi_pci_root_add+0x21c/0x3a0 [<9000000000f4ee54>] acpi_bus_attach+0x1a4/0x3c0 [<90000000010e200c>] device_for_each_child+0x6c/0xe0 [<9000000000f4bbf4>] acpi_dev_for_each_child+0x44/0x70 [<9000000000f4ef40>] acpi_bus_attach+0x290/0x3c0 [<90000000010e200c>] device_for_each_child+0x6c/0xe0 [<9000000000f4bbf4>] acpi_dev_for_each_child+0x44/0x70 [<9000000000f4ef40>] acpi_bus_attach+0x290/0x3c0 [<9000000000f5211c>] acpi_bus_scan+0x6c/0x280 [<900000000189c028>] acpi_scan_init+0x194/0x310 [<900000000189bc6c>] acpi_init+0xcc/0x140 [<9000000000220cdc>] do_one_initcall+0x4c/0x310 [<90000000018618fc>] kernel_init_freeable+0x258/0x2d4 [<900000000184326c>] kernel_init+0x28/0x13c [<9000000000222008>] ret_from_kernel_thread+0xc/0xa4

The advisory is shared at git.kernel.org. This vulnerability is uniquely identified as CVE-2026-46156 since 05/13/2026. The exploitability is told to be easy. Technical details are known, but no exploit is available. The price for an exploit might be around USD $5k-$25k at the moment (estimation calculated on 06/10/2026).

Upgrading to version 6.6.140, 6.12.88, 6.18.30, 7.0.7 or 7.1-rc3 eliminates this vulnerability. Applying the patch 07d190e4ec689d6478f7f5e36099fb9bf457e7c5/2cb19b06c09983727573bbe7d7430cbad480a714/9e1aed63a5552958ef2a9bfd699a3f990e52a77f/81fef1c278436e6bd68ee4ca05a0acb96e256561/8dfa2f8780e486d05b9a0ffce70b8f5fbd62053e is able to eliminate this problem. The bugfix is ready for download at git.kernel.org. The best possible mitigation is suggested to be upgrading to the latest version.

If you want to get the best quality for vulnerability data then you always have to consider VulDB.

Productinfo

Type

• Operating System

Vendor

• Linux

Name

• Kernel

Version

• 6.6.139
• 6.12.0
• 6.12.1
• 6.12.2
• 6.12.3
• 6.12.4
• 6.12.5
• 6.12.6
• 6.12.7
• 6.12.8
• 6.12.9
• 6.12.10
• 6.12.11
• 6.12.12
• 6.12.13
• 6.12.14
• 6.12.15
• 6.12.16
• 6.12.17
• 6.12.18
• 6.12.19
• 6.12.20
• 6.12.21
• 6.12.22
• 6.12.23
• 6.12.24
• 6.12.25
• 6.12.26
• 6.12.27
• 6.12.28
• 6.12.29
• 6.12.30
• 6.12.31
• 6.12.32
• 6.12.33
• 6.12.34
• 6.12.35
• 6.12.36
• 6.12.37
• 6.12.38
• 6.12.39
• 6.12.40
• 6.12.41
• 6.12.42
• 6.12.43
• 6.12.44
• 6.12.45
• 6.12.46
• 6.12.47
• 6.12.48
• 6.12.49
• 6.12.50
• 6.12.51
• 6.12.52
• 6.12.53
• 6.12.54
• 6.12.55
• 6.12.56
• 6.12.57
• 6.12.58
• 6.12.59
• 6.12.60
• 6.12.61
• 6.12.62
• 6.12.63
• 6.12.64
• 6.12.65
• 6.12.66
• 6.12.67
• 6.12.68
• 6.12.69
• 6.12.70
• 6.12.71
• 6.12.72
• 6.12.73
• 6.12.74
• 6.12.75
• 6.12.76
• 6.12.77
• 6.12.78
• 6.12.79
• 6.12.80
• 6.12.81
• 6.12.82
• 6.12.83
• 6.12.84
• 6.12.85
• 6.12.86
• 6.12.87
• 6.18.0
• 6.18.1
• 6.18.2
• 6.18.3
• 6.18.4
• 6.18.5
• 6.18.6
• 6.18.7
• 6.18.8
• 6.18.9
• 6.18.10
• 6.18.11
• 6.18.12
• 6.18.13
• 6.18.14
• 6.18.15
• 6.18.16
• 6.18.17
• 6.18.18
• 6.18.19
• 6.18.20
• 6.18.21
• 6.18.22
• 6.18.23
• 6.18.24
• 6.18.25
• 6.18.26
• 6.18.27
• 6.18.28
• 6.18.29
• 7.0.0
• 7.0.1
• 7.0.2
• 7.0.3
• 7.0.4
• 7.0.5
• 7.0.6
• 7.1-rc1
• 7.1-rc2

License

• open-source

Website

• Vendor: https://www.kernel.org/

CPE 2.3info

• 🔒
• 🔒
• 🔒

CPE 2.2info

• 🔒
• 🔒
• 🔒

CVSSv4info

CVSSv3info

CVSSv2info

Exploitinginfo

Threat Intelligenceinfo

Countermeasuresinfo

Timelineinfo

Sourcesinfo

Entryinfo

If you want to get the best quality for vulnerability data then you always have to consider VulDB.

Discussion