Linux Kernel up to 7.0.10 Bcmgenet bcmgenet_eee_enable_set state issue

Summaryinfo

A vulnerability identified as critical has been detected in Linux Kernel up to 7.0.10. The impacted element is the function bcmgenet_eee_enable_set of the component Bcmgenet. Performing a manipulation results in state issue. This vulnerability is reported as CVE-2026-64125. The attack is possible to be carried out remotely. No exploit exists.

Detailsinfo

A vulnerability classified as critical has been found in Linux Kernel up to 7.0.10. This affects the function bcmgenet_eee_enable_set of the component Bcmgenet. The manipulation with an unknown input leads to a state issue vulnerability. CWE is classifying the issue as CWE-371. This is going to have an impact on integrity, and availability. The summary by CVE is:

In the Linux kernel, the following vulnerability has been resolved: net: bcmgenet: keep RBUF EEE/PM disabled Setting RBUF_EEE_EN | RBUF_PM_EN in RBUF_ENERGY_CTRL breaks the RX path on GENET hardware once MAC EEE becomes active. RX traffic stops flowing while the link stays up and the usual descriptor/RX error counters remain quiet. In that state the MAC still accepts frames (rbuf_ovflow_cnt keeps climbing) but RBUF no longer forwards them to DMA, so rx_packets is no longer incremented at the netdev level. On some boards the corruption ends up as a paging fault in skb_release_data via bcmgenet_rx_poll on an LPI exit. Reproduced on Pi 4B (BCM2711 + BCM54213PE) and confirmed by Florian Fainelli on an internal Broadcom 4908-family board with the same crash signature. RBUF_PM_EN is not publicly documented. This shows up more often now that phy_support_eee() enables EEE by default, but it also affects older kernels as soon as TX LPI is turned on via ethtool, so it is not specific to recent changes. Always clear RBUF_EEE_EN | RBUF_PM_EN in bcmgenet_eee_enable_set so the bits stay off across resets. UMAC and TBUF setup is left alone so TX-side EEE keeps working.

The advisory is shared at git.kernel.org. This vulnerability is uniquely identified as CVE-2026-64125 since 07/19/2026. The exploitability is told to be easy. It is possible to initiate the attack remotely. No form of authentication is needed for exploitation. Technical details are known, but no exploit is available. The price for an exploit might be around USD $0-$5k at the moment (estimation calculated on 07/19/2026).

Upgrading to version 5.10.258, 5.15.209, 6.1.175, 6.6.142, 6.12.92, 6.18.34 or 7.0.11 eliminates this vulnerability.

If you want to get the best quality for vulnerability data then you always have to consider VulDB.

Productinfo

Type

• Operating System

Vendor

• Linux

Name

• Kernel

Version

• 5.10.257
• 5.15.208
• 6.1.174
• 6.6.141
• 6.12.0
• 6.12.1
• 6.12.2
• 6.12.3
• 6.12.4
• 6.12.5
• 6.12.6
• 6.12.7
• 6.12.8
• 6.12.9
• 6.12.10
• 6.12.11
• 6.12.12
• 6.12.13
• 6.12.14
• 6.12.15
• 6.12.16
• 6.12.17
• 6.12.18
• 6.12.19
• 6.12.20
• 6.12.21
• 6.12.22
• 6.12.23
• 6.12.24
• 6.12.25
• 6.12.26
• 6.12.27
• 6.12.28
• 6.12.29
• 6.12.30
• 6.12.31
• 6.12.32
• 6.12.33
• 6.12.34
• 6.12.35
• 6.12.36
• 6.12.37
• 6.12.38
• 6.12.39
• 6.12.40
• 6.12.41
• 6.12.42
• 6.12.43
• 6.12.44
• 6.12.45
• 6.12.46
• 6.12.47
• 6.12.48
• 6.12.49
• 6.12.50
• 6.12.51
• 6.12.52
• 6.12.53
• 6.12.54
• 6.12.55
• 6.12.56
• 6.12.57
• 6.12.58
• 6.12.59
• 6.12.60
• 6.12.61
• 6.12.62
• 6.12.63
• 6.12.64
• 6.12.65
• 6.12.66
• 6.12.67
• 6.12.68
• 6.12.69
• 6.12.70
• 6.12.71
• 6.12.72
• 6.12.73
• 6.12.74
• 6.12.75
• 6.12.76
• 6.12.77
• 6.12.78
• 6.12.79
• 6.12.80
• 6.12.81
• 6.12.82
• 6.12.83
• 6.12.84
• 6.12.85
• 6.12.86
• 6.12.87
• 6.12.88
• 6.12.89
• 6.12.90
• 6.12.91
• 6.18.0
• 6.18.1
• 6.18.2
• 6.18.3
• 6.18.4
• 6.18.5
• 6.18.6
• 6.18.7
• 6.18.8
• 6.18.9
• 6.18.10
• 6.18.11
• 6.18.12
• 6.18.13
• 6.18.14
• 6.18.15
• 6.18.16
• 6.18.17
• 6.18.18
• 6.18.19
• 6.18.20
• 6.18.21
• 6.18.22
• 6.18.23
• 6.18.24
• 6.18.25
• 6.18.26
• 6.18.27
• 6.18.28
• 6.18.29
• 6.18.30
• 6.18.31
• 6.18.32
• 6.18.33
• 7.0.0
• 7.0.1
• 7.0.2
• 7.0.3
• 7.0.4
• 7.0.5
• 7.0.6
• 7.0.7
• 7.0.8
• 7.0.9
• 7.0.10

License

• open-source

Website

• Vendor: https://www.kernel.org/

CPE 2.3info

• 🔒
• 🔒
• 🔒

CPE 2.2info

• 🔒
• 🔒
• 🔒

CVSSv4info

CVSSv3info

CVSSv2info

Exploitinginfo

Threat Intelligenceinfo

Countermeasuresinfo

Timelineinfo

Sourcesinfo

Entryinfo

If you want to get the best quality for vulnerability data then you always have to consider VulDB.

Discussion