Linux Kernel up to 6.12.108/6.18.49/7.2.3 forcedeth forcedeth.c nv_suspend/nv_resume register_size off-by-one

| CVSS Meta Temp Score | Current Exploit Price (≈) | CTI Interest Score |
|---|---|---|
| 9.5 | $5k-$25k | 0.00+ |
Summary
A vulnerability has been found in Linux Kernel up to 6.12.108/6.18.49/7.2.3 and classified as very critical. This issue affects the function nv_suspend/nv_resume of the file drivers/net/ethernet/nvidia/forcedeth.c of the component forcedeth. Performing a manipulation of the argument register_size results in off-by-one.
This vulnerability is known as CVE-2026-89596. Remote exploitation of the attack is possible. No exploit is available.
The affected component should be upgraded.
Details
A vulnerability classified as very critical has been found in Linux Kernel up to 6.12.108/6.18.49/7.2.3. This affects the function nv_suspend/nv_resume of the file drivers/net/ethernet/nvidia/forcedeth.c of the component forcedeth. The manipulation of the argument register_size with an unknown input leads to a off-by-one vulnerability. CWE is classifying the issue as CWE-193. A product calculates or uses an incorrect maximum or minimum value that is 1 more, or 1 less, than the correct value. This is going to have an impact on confidentiality, integrity, and availability. The summary by CVE is:
In the Linux kernel, the following vulnerability has been resolved: forcedeth: fix off-by-one when saving/restoring non-PCI config space nv_suspend() and nv_resume() walk the non-PCI configuration space with for (i = 0; i <= np->register_size/sizeof(u32); i++) which runs one iteration too many. saved_config_space is declared as u32 saved_config_space[NV_PCI_REGSZ_MAX/4]; and NV_PCI_REGSZ_VER3 is equal to NV_PCI_REGSZ_MAX (0x604), so on a VER3 device register_size/sizeof(u32) is exactly the array length and the last iteration addresses one element past the end. The element it lands on is np->name_rx[0..3]: saved_config_space[] is followed immediately by char name_rx[IFNAMSIZ + 3], and char needs no padding. Nothing observable is corrupted by that, because nv_request_irq() rewrites name_rx with sprintf() before it is ever passed to request_irq(). The bug is the out-of-bounds access itself, which UBSAN reports and which CONFIG_UBSAN_TRAP=y turns into a trap that aborts the running kernel code, plus an MMIO read and, on resume, an MMIO writel() to base + 0x604, one dword past the range the driver mapped: np->base = ioremap(addr, np->register_size); VER1 and VER2 devices stay inside the array, but they too get the stray read and the stray write one dword past their own window. Caught by UBSAN on an Apple Macmini3,1 (MCP79) during a deep S3 cycle. The splat below is trimmed: the build path in the file name, the CPU and taint lines, the Workqueue line, the "?" hint frames, and the frames below device_suspend are all cut. The kernel was tainted, with an out-of-tree nouveau and CPU_OUT_OF_SPEC; forcedeth itself was the stock module. UBSAN: array-index-out-of-bounds in drivers/net/ethernet/nvidia/forcedeth.c:6225:25 index 385 is out of range for type 'u32 [385]' Call Trace: dump_stack_lvl+0x5d/0x80 ubsan_epilogue+0x5/0x2b __ubsan_handle_out_of_bounds.cold+0x54/0x59 __this_module+0xe398c/0xe9010 [forcedeth] pci_pm_suspend+0x80/0x170 dpm_run_callback+0x51/0x160 device_suspend+0x1a2/0x4a0 ... Both loops are hit. UBSAN reports each source location only once per module load (__ubsan_handle_out_of_bounds() calls suppress_report(), which does test_and_set_bit(REPORTED_BIT, ...) on the struct source_location), so the two splats land in the first S3 cycle after the module is loaded and later cycles are silent even though the access still runs off the end every time. In that first cycle line 6225 is reported from pci_pm_suspend and line 6240 from pci_pm_resume. The same off-by-one was fixed in nv_get_regs() by commit ba9aa134287f ("forcedeth: fix buffer overflow") in 2012; these two loops were missed. The suspend and resume side was reported on LKML in September 2013 by Marc Weber, with the same analysis and the same one-character fix, but the patch was attached rather than sent inline and the thread ended there. Use < instead of <=, which saves and restores exactly register_size bytes.
It is possible to read the advisory at git.kernel.org. This vulnerability is uniquely identified as CVE-2026-89596 since 09/11/2026. The exploitability is told to be easy. It is possible to initiate the attack remotely. Technical details of the vulnerability are known, but there is no available exploit. The pricing for an exploit might be around USD $5k-$25k at the moment (estimation calculated on 09/11/2026).
Upgrading to version 6.12.109, 6.18.50, 7.2.4 or 7.3-rc1 eliminates this vulnerability. Applying the patch 9379f8527ca60d92715c90b32f1b477de9ec32cb/0c3f4544ff3873594c8af1b907b4ac4e6d5ce005/c4f196bfeedd71e56aba4b63bd8f919edb2f7056/9393f1d656a79693e0c123ff7bc7c5c0f708046d is able to eliminate this problem. The best possible mitigation is suggested to be upgrading to the latest version.
Be aware that VulDB is the high quality source for vulnerability data.
Product
Type
Vendor
Name
Version
- 6.12.108
- 6.18.0
- 6.18.1
- 6.18.2
- 6.18.3
- 6.18.4
- 6.18.5
- 6.18.6
- 6.18.7
- 6.18.8
- 6.18.9
- 6.18.10
- 6.18.11
- 6.18.12
- 6.18.13
- 6.18.14
- 6.18.15
- 6.18.16
- 6.18.17
- 6.18.18
- 6.18.19
- 6.18.20
- 6.18.21
- 6.18.22
- 6.18.23
- 6.18.24
- 6.18.25
- 6.18.26
- 6.18.27
- 6.18.28
- 6.18.29
- 6.18.30
- 6.18.31
- 6.18.32
- 6.18.33
- 6.18.34
- 6.18.35
- 6.18.36
- 6.18.37
- 6.18.38
- 6.18.39
- 6.18.40
- 6.18.41
- 6.18.42
- 6.18.43
- 6.18.44
- 6.18.45
- 6.18.46
- 6.18.47
- 6.18.48
- 6.18.49
- 7.2.0
- 7.2.1
- 7.2.2
- 7.2.3
License
Website
- Vendor: https://www.kernel.org/
CPE 2.3
CPE 2.2
CVSSv4
VulDB Vector: 🔒VulDB Reliability: 🔍
CVSSv3
VulDB Meta Base Score: 9.9VulDB Meta Temp Score: 9.5
VulDB Base Score: 9.9
VulDB Temp Score: 9.5
VulDB Vector: 🔒
VulDB Reliability: 🔍
CVSSv2
| AV | AC | Au | C | I | A |
|---|---|---|---|---|---|
| 💳 | 💳 | 💳 | 💳 | 💳 | 💳 |
| 💳 | 💳 | 💳 | 💳 | 💳 | 💳 |
| 💳 | 💳 | 💳 | 💳 | 💳 | 💳 |
| Vector | Complexity | Authentication | Confidentiality | Integrity | Availability |
|---|---|---|---|---|---|
| Unlock | Unlock | Unlock | Unlock | Unlock | Unlock |
| Unlock | Unlock | Unlock | Unlock | Unlock | Unlock |
| Unlock | Unlock | Unlock | Unlock | Unlock | Unlock |
VulDB Base Score: 🔒
VulDB Temp Score: 🔒
VulDB Reliability: 🔍
Exploiting
Class: Off-by-oneCWE: CWE-193 / CWE-189
CAPEC: 🔒
ATT&CK: 🔒
Physical: No
Local: No
Remote: Yes
Availability: 🔒
Status: Not defined
Price Prediction: 🔍
Current Price Estimation: 🔒
| 0-Day | Unlock | Unlock | Unlock | Unlock |
|---|---|---|---|---|
| Today | Unlock | Unlock | Unlock | Unlock |
Threat Intelligence
Interest: 🔍Active Actors: 🔍
Active APT Groups: 🔍
Countermeasures
Recommended: UpgradeStatus: 🔍
0-Day Time: 🔒
Upgrade: Kernel 6.12.109/6.18.50/7.2.4/7.3-rc1
Patch: 9379f8527ca60d92715c90b32f1b477de9ec32cb/0c3f4544ff3873594c8af1b907b4ac4e6d5ce005/c4f196bfeedd71e56aba4b63bd8f919edb2f7056/9393f1d656a79693e0c123ff7bc7c5c0f708046d
Timeline
09/11/2026 Advisory disclosed09/11/2026 CVE reserved
09/11/2026 VulDB entry created
09/11/2026 VulDB entry last update
Sources
Vendor: kernel.orgAdvisory: git.kernel.org
Status: Confirmed
CVE: CVE-2026-89596 (🔒)
GCVE (CVE): GCVE-0-2026-89596
GCVE (VulDB): GCVE-100-402615
Entry
Created: 09/11/2026 23:01Changes: 09/11/2026 23:01 (61)
Complete: 🔍
Cache ID: 216::103
Be aware that VulDB is the high quality source for vulnerability data.
No comments yet. Languages: en.
Please log in to comment.