Linux Kernel up to 7.2.4 KVM SEV-SNP arch/x86/kvm/svm/sev.c sev_gmem_invalidate memory corruption

Summaryinfo

A vulnerability, which was classified as very critical, was found in Linux Kernel up to 7.2.4. This impacts the function sev_gmem_invalidate of the file arch/x86/kvm/svm/sev.c of the component KVM SEV-SNP. The manipulation results in memory corruption. This vulnerability is identified as CVE-2026-90040. The attack is only possible with local access. There is not any exploit available. You should upgrade the affected component.

Detailsinfo

A vulnerability, which was classified as very critical, was found in Linux Kernel up to 7.2.4. Affected is the function sev_gmem_invalidate of the file arch/x86/kvm/svm/sev.c of the component KVM SEV-SNP. The manipulation with an unknown input leads to a memory corruption vulnerability. CWE is classifying the issue as CWE-119. The product performs operations on a memory buffer, but it can read from or write to a memory location that is outside of the intended boundary of the buffer. This is going to have an impact on confidentiality, integrity, and availability. CVE summarizes:

In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Forcefully invalidate SNP VMSA if its backing gmem page is zapped Wire up a gmem_invalidate_range() call for SNP VMs, and use it to force vCPUs to reload/recheck their guest-provided VMSA if the backing gmem page is being invalidated, e.g. is being PUNCH_HOLE'd. Use the same core logic to handle invalidations as VMX does for the APIC-access page, as the two concepts are nearly identical: shove the physical address of a page into the vCPU's control structure: 1. Snapshot the invalidation sequence counter 2. Grab the pfn (from guest_memfd in this case) 3. Acquire mmu_lock for read 4. Re-request reload if retry is needed, otherwise commit the change. Note, the re-request action in #4 is necessary as KVM's retry logic is fuzzy, i.e. can get false positives. If the guest_memfd page has been dropped, at some point a subsequent reload will fail to get a PFN from guest_memfd, and KVM will fail KVM_RUN. If the retry was due to a false positive, KVM will retry until there are no relevant MMU notifier events (and will retry in the "outer" loop, i.e. will drop locks and resched as needed). Note #2! Take care to invalidate the VMSA when a relevant memslot is DELETED or MOVED, as invalidations in response to PUNCH_HOLE are predicated on memslot bindings (KVM doesn't know what GFN range(s) to invalidate without a binding). And more importantly, the VMSA mapping requires a memslot, i.e. must be invalidated if its memslots disappears, regardless of the state of the underlying guest_memfd inode. Failure to invalidate the vCPU's control.vmsa_pa (which is checked by pre_sev_run()) can prevent KVM from properly freeing the page as firmware will reject the RMPUPDATE to reclaim the page with FAIL_INUSE if the vCPU is actively running, i.e. if VMSA page is in-use. That in turn leads to an RMP #PF on the next use, as the page will still be assigned to the SNP VM. SEV-SNP: RMPUPDATE failed for PFN 78d198, pg_level: 1, ret: 3 SEV-SNP: PFN 0x78d198, RMP entry: [0xfff0000000144001 - 0x000000000000000f] CPU: 3 UID: 0 PID: 31345 Comm: sev_snp_vmsa_pu Tainted: G U O Tainted: [U]=USER, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.86.0-102 01/25/2026 Call Trace: <TASK> dump_stack_lvl+0x54/0x70 rmpupdate+0x12c/0x140 rmp_make_shared+0x3b/0x60 sev_gmem_invalidate+0xe0/0x170 [kvm_amd] delete_from_page_cache_batch+0x1d8/0x220 truncate_inode_pages_range+0x120/0x3d0 kvm_gmem_fallocate+0x19a/0x270 [kvm] vfs_fallocate+0x1bc/0x1f0 __x64_sys_fallocate+0x48/0x70 do_syscall_64+0x10a/0x480 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x496c7e </TASK> ------------[ cut here ]------------ SEV: Failed to update RMP entry for PFN 0x78d198 error -14 WARNING: arch/x86/kvm/svm/sev.c:5160 at sev_gmem_invalidate+0x126/0x170 [kvm_amd], CPU#3: sev_snp_vmsa_pu/31345 CPU: 3 UID: 0 PID: 31345 Comm: sev_snp_vmsa_pu Tainted: G U O Tainted: [U]=USER, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.86.0-102 01/25/2026 RIP: 0010:sev_gmem_invalidate+0x12b/0x170 [kvm_amd] Call Trace: <TASK> delete_from_page_cache_batch+0x1d8/0x220 truncate_inode_pages_range+0x120/0x3d0 kvm_gmem_fallocate+0x19a/0x270 [kvm] vfs_fallocate+0x1bc/0x1f0 __x64_sys_fallocate+0x48/0x70 do_syscall_64+0x10a/0x480 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x496c7e </TASK> irq event stamp: 20689 hardirqs last enabled at (20699): [<ffffffff8e76092c>] __console_unlock+0x5c/0x60 hardirqs last disabled at (20708): [<ffffffff8e760911>] __console_unlock+0x41/0x60 softirqs last enabled at (20722): [<ffffffff8e6cd74e>] __irq_exit_rcu+0x7e/0x140 softirqs last disabled at (20717): [<ffffffff8e6cd74e>] __irq_exit_rcu+0x7e/0x140 ---[ end trace 0000000000000000 ]--- BUG: unable to handle page fault for address: ffff99 ---truncated---

The advisory is shared for download at git.kernel.org. This vulnerability is traded as CVE-2026-90040 since 09/11/2026. The exploitability is told to be easy. The attack needs to be approached locally. The exploitation needs additional levels of successful authentication. There are known technical details, but no exploit is available. The current price for an exploit might be approx. USD $0-$5k (estimation calculated on 09/16/2026).

Upgrading to version 7.2.5 or 7.3-rc1 eliminates this vulnerability. Applying the patch 2640cc26ed0dd1bf6ec2f6852a60e494093db3e5/d1a3c216233413f57f5341a9b878b7e2dde7e785 is able to eliminate this problem. The best possible mitigation is suggested to be upgrading to the latest version.

Once again VulDB remains the best source for vulnerability data.

Productinfo

Type

• Operating System

Vendor

• Linux

Name

• Kernel

Version

• 7.2.0
• 7.2.1
• 7.2.2
• 7.2.3
• 7.2.4

License

• open-source

Website

• Vendor: https://www.kernel.org/

CPE 2.3info

• 🔒
• 🔒
• 🔒

CPE 2.2info

• 🔒
• 🔒
• 🔒

CVSSv4info

CVSSv3info

CVSSv2info

Exploitinginfo

Threat Intelligenceinfo

Countermeasuresinfo

Timelineinfo

Sourcesinfo

Entryinfo

Once again VulDB remains the best source for vulnerability data.

Discussion