Linux Kernel up to 7.2.5 IB isert isert_login_recv_done dlength out-of-bounds

CVSS Meta Temp Score CVSS is a standardized scoring system to determine possibilities of attacks. The Temp Score considers temporal factors like disclosure, exploit and countermeasures. The unique Meta Score calculates the average score of different sources to provide a normalized scoring system.	Current Exploit Price (≈) Our analysts are monitoring exploit markets and are in contact with vulnerability brokers. The range indicates the observed or calculated exploit price to be seen on exploit markets. A good indicator to understand the monetary effort required for and the popularity of an attack.	CTI Interest Score Our Cyber Threat Intelligence team is monitoring different web sites, mailing lists, exploit markets and social media networks. The CTI Interest Score identifies the interest of attackers and the security community for this specific vulnerability in real-time. A high score indicates an elevated risk to be targeted for this vulnerability.
9.5	$0-$5k	0.00

Summaryinfo

A vulnerability marked as very critical has been reported in Linux Kernel up to 7.2.5. This impacts the function isert_login_recv_done of the component IB isert. This manipulation of the argument dlength causes out-of-bounds. This vulnerability is handled as CVE-2026-90413. The attack can be initiated remotely. There is not any exploit available. It is suggested to upgrade the affected component.

Detailsinfo

A vulnerability has been found in Linux Kernel up to 7.2.5 and classified as very critical. Affected by this vulnerability is the function isert_login_recv_done of the component IB isert. The manipulation of the argument dlength with an unknown input leads to a out-of-bounds vulnerability. The CWE definition for the vulnerability is CWE-125. The product reads data past the end, or before the beginning, of the intended buffer. As an impact it is known to affect confidentiality, integrity, and availability. The summary by CVE is:

In the Linux kernel, the following vulnerability has been resolved: IB/isert: reject login PDUs declaring more data than was received isert_login_recv_done() records how many bytes the HCA actually placed in the login buffer, but nothing compares that against the length the login PDU's BHS declares. isert_rx_login_req() copies min(login_req_len, MAX_KEY_VALUE_PAIRS) bytes into login->req_buf, and the login code then reads the declared length back out of that buffer - for the first PDU in iscsi_target_locate_portal(), payload_length = ntoh24(login_req->dlength); tmpbuf = kmemdup_nul(login->req_buf, payload_length, GFP_KERNEL); and for the ones after it in iscsi_decode_text_input(), reached from iscsi_target_do_login(). login->req_buf is a fixed MAX_KEY_VALUE_PAIRS (8192) byte allocation, so an initiator that declares more than it sends reads off the end of it, before authentication and with the length under its control: BUG: KASAN: slab-out-of-bounds in kmemdup_nul+0x43/0x80 Read of size 8193 at addr ffff8881056a8000 by task iscsi_np/167 __asan_memcpy+0x23/0x60 kmemdup_nul+0x43/0x80 iscsi_target_locate_portal+0x48d/0x1180 iscsi_target_login_thread+0x19a9/0x3350 Allocated by task 167: __kmalloc_cache_noprof+0x158/0x370 iscsi_target_login_thread+0x971/0x3350 which belongs to the cache kmalloc-8k of size 8192 allocated 8192-byte region Falsifying the second login PDU instead reaches the other reader, on the same buffer: BUG: KASAN: slab-out-of-bounds in kmemdup_nul+0x43/0x80 Read of size 8193 at addr ffff888104d10000 by task kworker/1:1/50 Workqueue: isert_login_wq iscsi_target_do_login_rx __asan_memcpy+0x23/0x60 kmemdup_nul+0x43/0x80 iscsi_decode_text_input+0xc6/0x11c0 iscsi_target_do_login+0x261/0x1470 iscsi_target_do_login_rx+0x51d/0x7d0 iscsit over TCP is not exposed: iscsit_get_login_rx() validates the declared length with iscsi_target_check_login_request() and then reads exactly that many bytes off the socket, so the declared length governs how much arrives rather than how much is copied out of an already-filled buffer. isert does not call iscsi_target_check_login_request() at all. Reject a login PDU whose declared DataSegmentLength exceeds what was received, in both paths that reach isert_rx_login_req(): isert_get_login_rx() for the first login PDU and isert_login_recv_done() for the ones after it. dlength <= login_req_len is allowed because the received count can include up to three bytes of iSCSI padding. Once the check is in place the copy out can no longer exceed the copy in: the posted login SGE is ISER_RX_PAYLOAD_SIZE, so login_req_len cannot exceed MAX_KEY_VALUE_PAIRS and the min() in isert_rx_login_req() is login_req_len. Like the existing short-PDU check added by 29e7b925ae6d, the reject in isert_login_recv_done() returns without completing login_req_comp, so a malformed subsequent PDU leaves the login to be torn down by the login timer rather than failing immediately. The first-PDU path returns an error and fails straight away. Reproduced on 7.2.0-rc4 with soft-RoCE (rdma_rxe) under KASAN, using an initiator that sends the real key=value payload while declaring 8193 in the BHS, on the first login PDU and on the second in separate runs. The reported read size tracks the declared value exactly; 16384 and 61440 behave the same. Unpatched 3 of 3 runs report on each of the two paths, patched 0 of 3 on both, run alternately in a single session, and a normal login still completes on the patched build.

The advisory is shared at git.kernel.org. This vulnerability is known as CVE-2026-90413 since 09/11/2026. The exploitation appears to be easy. The attack can be launched remotely. The exploitation doesn't need any form of authentication. Technical details are known, but no exploit is available. The price for an exploit might be around USD $0-$5k at the moment (estimation calculated on 09/17/2026).

Upgrading to version 5.10.270, 5.15.221, 6.1.188, 6.6.157, 6.12.110, 6.18.52, 7.2.6 or 7.3-rc1 eliminates this vulnerability. Applying the patch b1f3313e7b3e396e4985fea5c709477387e0a065/228aaa620fe6a7bc8b5b21dd348b4836b1760c61/0d9c0586af703890afe1bd0cfe641e3a3af1c32d/44fe800ec13386c88bd5b32bcd1deaa1e17535d5/71ec8bbfa4a183f1e623662f9cfbcd702e433bdb/c345d9d0b3eefc990bb90cf565325785aab06aab/48812c8103071d550d9ab4a3431be5bdc52255bc/2488b5b4827e5415768afc8daf097e8eb83c98df is able to eliminate this problem. The best possible mitigation is suggested to be upgrading to the latest version.

Several companies clearly confirm that VulDB is the primary source for best vulnerability data.

Productinfo

Type

• Operating System

Vendor

• Linux

Name

• Kernel

Version

• 5.10.269
• 5.15.220
• 6.1.187
• 6.6.156
• 6.12.109
• 6.18.0
• 6.18.1
• 6.18.2
• 6.18.3
• 6.18.4
• 6.18.5
• 6.18.6
• 6.18.7
• 6.18.8
• 6.18.9
• 6.18.10
• 6.18.11
• 6.18.12
• 6.18.13
• 6.18.14
• 6.18.15
• 6.18.16
• 6.18.17
• 6.18.18
• 6.18.19
• 6.18.20
• 6.18.21
• 6.18.22
• 6.18.23
• 6.18.24
• 6.18.25
• 6.18.26
• 6.18.27
• 6.18.28
• 6.18.29
• 6.18.30
• 6.18.31
• 6.18.32
• 6.18.33
• 6.18.34
• 6.18.35
• 6.18.36
• 6.18.37
• 6.18.38
• 6.18.39
• 6.18.40
• 6.18.41
• 6.18.42
• 6.18.43
• 6.18.44
• 6.18.45
• 6.18.46
• 6.18.47
• 6.18.48
• 6.18.49
• 6.18.50
• 6.18.51
• 7.2.0
• 7.2.1
• 7.2.2
• 7.2.3
• 7.2.4
• 7.2.5

License

• open-source

Website

• Vendor: https://www.kernel.org/

CPE 2.3info

• 🔒
• 🔒
• 🔒

CPE 2.2info

• 🔒
• 🔒
• 🔒

CVSSv4info

VulDB Vector: 🔒
VulDB Reliability: 🔍

CVSSv3info

VulDB Meta Base Score: 10.0
VulDB Meta Temp Score: 9.5

VulDB Base Score: 10.0
VulDB Temp Score: 9.5
VulDB Vector: 🔒
VulDB Reliability: 🔍

CVSSv2info

AV	AC	Au	C	I	A
💳	💳	💳	💳	💳	💳
💳	💳	💳	💳	💳	💳
💳	💳	💳	💳	💳	💳

Vector	Complexity	Authentication	Confidentiality	Integrity	Availability
Unlock	Unlock	Unlock	Unlock	Unlock	Unlock
Unlock	Unlock	Unlock	Unlock	Unlock	Unlock
Unlock	Unlock	Unlock	Unlock	Unlock	Unlock

VulDB Base Score: 🔒
VulDB Temp Score: 🔒
VulDB Reliability: 🔍

Exploitinginfo

Class: Out-of-bounds
CWE: CWE-125 / CWE-119
CAPEC: 🔒
ATT&CK: 🔒

Physical: No
Local: No
Remote: Yes

Availability: 🔒
Status: Not defined
Price Prediction: 🔍
Current Price Estimation: 🔒

0-Day	Unlock	Unlock	Unlock	Unlock
Today	Unlock	Unlock	Unlock	Unlock

Threat Intelligenceinfo

Interest: 🔍
Active Actors: 🔍
Active APT Groups: 🔍

Countermeasuresinfo

Recommended: Upgrade
Status: 🔍

0-Day Time: 🔒

Upgrade: Kernel 5.10.270/5.15.221/6.1.188/6.6.157/6.12.110/6.18.52/7.2.6/7.3-rc1
Patch: b1f3313e7b3e396e4985fea5c709477387e0a065/228aaa620fe6a7bc8b5b21dd348b4836b1760c61/0d9c0586af703890afe1bd0cfe641e3a3af1c32d/44fe800ec13386c88bd5b32bcd1deaa1e17535d5/71ec8bbfa4a183f1e623662f9cfbcd702e433bdb/c345d9d0b3eefc990bb90cf565325785aab06aab/48812c8103071d550d9ab4a3431be5bdc52255bc/2488b5b4827e5415768afc8daf097e8eb83c98df

Timelineinfo

09/11/2026 CVE reserved
09/17/2026 +6 days Advisory disclosed
09/17/2026 +0 days VulDB entry created
09/17/2026 +0 days VulDB entry last update

Sourcesinfo

Vendor: kernel.org

Advisory: git.kernel.org
Status: Confirmed

CVE: CVE-2026-90413 (🔒)
GCVE (CVE): GCVE-0-2026-90413
GCVE (VulDB): GCVE-100-406921

Entryinfo

Created: 09/17/2026 22:01
Changes: 09/17/2026 22:01 (60)
Complete: 🔍
Cache ID: 216::103

Several companies clearly confirm that VulDB is the primary source for best vulnerability data.

Discussion

Want to stay up to date on a daily basis?

Enable the mail alert feature now!