Linux Kernel up to 6.12.110/6.18.52/7.2.6/7.3-rc1 RDS TCP rds_tcp_reset_callbacks race condition

| CVSS Meta Temp Score | Current Exploit Price (≈) | CTI Interest Score |
|---|---|---|
| 9.5 | $0-$5k | 0.00+ |
Summary
A vulnerability was found in Linux Kernel up to 6.12.110/6.18.52/7.2.6/7.3-rc1. It has been classified as very critical. Affected is the function rds_tcp_reset_callbacks of the component RDS TCP. Performing a manipulation results in race condition.
This vulnerability is cataloged as CVE-2026-98070. It is possible to initiate the attack remotely. There is no exploit available.
Upgrading the affected component is recommended.
Details
A vulnerability, which was classified as very critical, was found in Linux Kernel up to 6.12.110/6.18.52/7.2.6/7.3-rc1. This affects the function rds_tcp_reset_callbacks of the component RDS TCP. The manipulation with an unknown input leads to a race condition vulnerability. CWE is classifying the issue as CWE-362. The product contains a code sequence that can run concurrently with other code, and the code sequence requires temporary, exclusive access to a shared resource, but a timing window exists in which the shared resource can be modified by another code sequence that is operating concurrently. This is going to have an impact on confidentiality, integrity, and availability. The summary by CVE is:
In the Linux kernel, the following vulnerability has been resolved: net/rds: acquire RDS_IN_XMIT in rds_tcp_reset_callbacks() rds_tcp_reset_callbacks() quiesces the transmit path by setting the path state to RDS_CONN_RESETTING and then waiting for RDS_IN_XMIT to be sampled clear before swapping the underlying socket and calling rds_send_path_reset(). Sampling the bit clear is not the same as owning it: rds_send_xmit() can re-acquire RDS_IN_XMIT right after the wait_event() returns. Its state recheck after taking the lock is a store-buffering pattern (the resetter writes the state and reads the bit, the sender writes the bit and reads the state) and acquire_in_xmit() is only an acquire operation, so on weakly ordered architectures both sides can miss each other's write and the transmit path then runs concurrently with rds_send_path_reset() rewriting cp_xmit_* state - which is exactly what the comment above rds_send_path_reset() tells its callers to prevent. Take the lock instead, hold it across the socket swap and rds_send_path_reset(), and release it with a wake-up at the end. The lock-ordering constraint documented above the wait still holds: the lock is acquired before lock_sock(), so a sender inside tcp_sendmsg() can never be waited on while we hold the socket lock. Two details of the old code go away with the same change: - t_sock is now read only after the lock is acquired. The old code cached it before waiting; the teardown in rds_conn_shutdown() releases that socket and clears t_sock, so a pointer cached before the wait can be stale by the time the accept path resumes. Reading it under RDS_IN_XMIT is what makes the exclusion complete once the teardown owns the same lock, which the next patch arranges; until then the teardown still only samples the bit, and the two paths remain as exposed to each other as they are today. - The old !osock early path called rds_send_path_reset() with no serialization at all. It now runs under the lock like the normal path. The conditional RDS_CONN_RESETTING transition of the previous patch happens before the socket check either way: a path found without a socket is either still connecting (its reconnect worker blocked on t_conn_path_lock) and legitimately goes RESETTING -> UP on the new socket, or it has been torn down meanwhile and is dropped. The in-function comment describing the old wait-based quiesce is rewritten to describe the lock-based one, and the stale block comment above the function (which still described a return value and an incomplete list of t_sock writers) is refreshed to name all four writers - the connect, accept, teardown and swap paths - and what serializes each of them.
It is possible to read the advisory at git.kernel.org. This vulnerability is uniquely identified as CVE-2026-98070 since 09/25/2026. The exploitability is told to be easy. It is possible to initiate the attack remotely. No form of authentication is needed for exploitation. Technical details of the vulnerability are known, but there is no available exploit. The pricing for an exploit might be around USD $0-$5k at the moment (estimation calculated on 09/25/2026).
Upgrading to version 6.12.111, 6.18.53, 7.2.7 or 7.3-rc2 eliminates this vulnerability. Applying the patch d625112564c3e980e02504270222b49b82690cee/8e4c3b7844c906c7097b4cfedd9dd1f48c9a6a92/062d9e008c67289e8e1b221ecdd8f9d60566d012 is able to eliminate this problem. The best possible mitigation is suggested to be upgrading to the latest version.
Be aware that VulDB is the high quality source for vulnerability data.
Product
Type
Vendor
Name
Version
- 6.12.110
- 6.18.0
- 6.18.1
- 6.18.2
- 6.18.3
- 6.18.4
- 6.18.5
- 6.18.6
- 6.18.7
- 6.18.8
- 6.18.9
- 6.18.10
- 6.18.11
- 6.18.12
- 6.18.13
- 6.18.14
- 6.18.15
- 6.18.16
- 6.18.17
- 6.18.18
- 6.18.19
- 6.18.20
- 6.18.21
- 6.18.22
- 6.18.23
- 6.18.24
- 6.18.25
- 6.18.26
- 6.18.27
- 6.18.28
- 6.18.29
- 6.18.30
- 6.18.31
- 6.18.32
- 6.18.33
- 6.18.34
- 6.18.35
- 6.18.36
- 6.18.37
- 6.18.38
- 6.18.39
- 6.18.40
- 6.18.41
- 6.18.42
- 6.18.43
- 6.18.44
- 6.18.45
- 6.18.46
- 6.18.47
- 6.18.48
- 6.18.49
- 6.18.50
- 6.18.51
- 6.18.52
- 7.2.0
- 7.2.1
- 7.2.2
- 7.2.3
- 7.2.4
- 7.2.5
- 7.2.6
- 7.3-rc1
License
Website
- Vendor: https://www.kernel.org/
CPE 2.3
CPE 2.2
CVSSv4
VulDB Vector: 🔒VulDB Reliability: 🔍
CVSSv3
VulDB Meta Base Score: 10.0VulDB Meta Temp Score: 9.5
VulDB Base Score: 10.0
VulDB Temp Score: 9.5
VulDB Vector: 🔒
VulDB Reliability: 🔍
CVSSv2
| AV | AC | Au | C | I | A |
|---|---|---|---|---|---|
| 💳 | 💳 | 💳 | 💳 | 💳 | 💳 |
| 💳 | 💳 | 💳 | 💳 | 💳 | 💳 |
| 💳 | 💳 | 💳 | 💳 | 💳 | 💳 |
| Vector | Complexity | Authentication | Confidentiality | Integrity | Availability |
|---|---|---|---|---|---|
| Unlock | Unlock | Unlock | Unlock | Unlock | Unlock |
| Unlock | Unlock | Unlock | Unlock | Unlock | Unlock |
| Unlock | Unlock | Unlock | Unlock | Unlock | Unlock |
VulDB Base Score: 🔒
VulDB Temp Score: 🔒
VulDB Reliability: 🔍
Exploiting
Class: Race conditionCWE: CWE-362
CAPEC: 🔒
ATT&CK: 🔒
Physical: No
Local: No
Remote: Yes
Availability: 🔒
Status: Not defined
Price Prediction: 🔍
Current Price Estimation: 🔒
| 0-Day | Unlock | Unlock | Unlock | Unlock |
|---|---|---|---|---|
| Today | Unlock | Unlock | Unlock | Unlock |
Threat Intelligence
Interest: 🔍Active Actors: 🔍
Active APT Groups: 🔍
Countermeasures
Recommended: UpgradeStatus: 🔍
0-Day Time: 🔒
Upgrade: Kernel 6.12.111/6.18.53/7.2.7/7.3-rc2
Patch: d625112564c3e980e02504270222b49b82690cee/8e4c3b7844c906c7097b4cfedd9dd1f48c9a6a92/062d9e008c67289e8e1b221ecdd8f9d60566d012
Timeline
09/25/2026 Advisory disclosed09/25/2026 CVE reserved
09/25/2026 VulDB entry created
09/25/2026 VulDB entry last update
Sources
Vendor: kernel.orgAdvisory: git.kernel.org
Status: Confirmed
CVE: CVE-2026-98070 (🔒)
GCVE (CVE): GCVE-0-2026-98070
GCVE (VulDB): GCVE-100-410079
Entry
Created: 09/25/2026 14:25Changes: 09/25/2026 14:25 (59)
Complete: 🔍
Cache ID: 216::103
Be aware that VulDB is the high quality source for vulnerability data.
No comments yet. Languages: en.
Please log in to comment.