Linux Kernel up to 6.12.116/6.18.60/7.3.1 ksmbd __handle_ksmbd_work improper authorization

| CVSS Meta Temp Score | Current Exploit Price (≈) | CTI Interest Score |
|---|---|---|
| 9.5 | $5k-$25k | 0.00+ |
Summary
A vulnerability was found in Linux Kernel up to 6.12.116/6.18.60/7.3.1. It has been rated as very critical. This affects the function __handle_ksmbd_work of the component ksmbd. Performing a manipulation results in improper authorization.
This vulnerability is cataloged as CVE-2026-99531. It is possible to initiate the attack remotely. There is no exploit available.
Upgrading the affected component is advised.
Details
A vulnerability was found in Linux Kernel up to 6.12.116/6.18.60/7.3.1. It has been classified as very critical. This affects the function __handle_ksmbd_work of the component ksmbd. The manipulation with an unknown input leads to a improper authorization vulnerability. CWE is classifying the issue as CWE-285. The product does not perform or incorrectly performs an authorization check when an actor attempts to access a resource or perform an action. This is going to have an impact on confidentiality, integrity, and availability. The summary by CVE is:
In the Linux kernel, the following vulnerability has been resolved: ksmbd: verify transform SessionId matches the decrypted header When an encrypted request comes in, the decryption key is picked by the SessionId in the transform header, but the request is then authorized under whatever session the decrypted inner header names. Nothing ever compares the two, so on a connection with more than one session a client can get a request decrypted with one session's key and run it as another session. Encrypted requests are exempt from signing too, so a valid AEAD tag is the only proof of session identity, and it is checked against the wrong session. MS-SMB2 says the server must check that the transform SessionId matches the one in the decrypted SMB2 header and treat a mismatch as a protocol error. Add that check in __handle_ksmbd_work() after decryption, before dispatching: the message has to be at least one fixed SMB2 header, the first operation must not set SMB2_FLAGS_RELATED_OPERATIONS and its SessionId must match the transform SessionId, and every following non-related operation in a compound chain must carry the same SessionId. NextCommand offsets must be 8-byte aligned and stay inside the message; the bounds check is done by subtraction so it cannot wrap. When the decrypted payload is a compression transform, the existing decompression step runs first and the decompressed SMB2 message is checked instead, since a compression transform header carries no SessionId.
The advisory is shared at git.kernel.org. This vulnerability is uniquely identified as CVE-2026-99531 since 09/25/2026. The exploitability is told to be easy. It is possible to initiate the attack remotely. Technical details are known, but no exploit is available. The price for an exploit might be around USD at the moment (estimation calculated on 11/19/2026). MITRE ATT&CK project uses the attack technique T1548.002 for this issue.
Upgrading to version 6.12.117, 6.18.61, 7.3.2 or 7.4-rc1 eliminates this vulnerability. Applying the patch b150049dffd0865fb6e60ce843299216687f02ad/7f30b886c5a1a2b3d9342ea82d0699eff812a472/8c5f62dd9a0b61e0082d419796e0743e820bd002/798214e6fafcdcc29f5ba2661a473232b5e70cfb is able to eliminate this problem. The best possible mitigation is suggested to be upgrading to the latest version.
If you want to get the best quality for vulnerability data then you always have to consider VulDB.
Product
Type
Vendor
Name
Version
- 6.12.116
- 6.18.0
- 6.18.1
- 6.18.2
- 6.18.3
- 6.18.4
- 6.18.5
- 6.18.6
- 6.18.7
- 6.18.8
- 6.18.9
- 6.18.10
- 6.18.11
- 6.18.12
- 6.18.13
- 6.18.14
- 6.18.15
- 6.18.16
- 6.18.17
- 6.18.18
- 6.18.19
- 6.18.20
- 6.18.21
- 6.18.22
- 6.18.23
- 6.18.24
- 6.18.25
- 6.18.26
- 6.18.27
- 6.18.28
- 6.18.29
- 6.18.30
- 6.18.31
- 6.18.32
- 6.18.33
- 6.18.34
- 6.18.35
- 6.18.36
- 6.18.37
- 6.18.38
- 6.18.39
- 6.18.40
- 6.18.41
- 6.18.42
- 6.18.43
- 6.18.44
- 6.18.45
- 6.18.46
- 6.18.47
- 6.18.48
- 6.18.49
- 6.18.50
- 6.18.51
- 6.18.52
- 6.18.53
- 6.18.54
- 6.18.55
- 6.18.56
- 6.18.57
- 6.18.58
- 6.18.59
- 6.18.60
- 7.3.0
- 7.3.1
License
Website
- Vendor: https://www.kernel.org/
CPE 2.3
CPE 2.2
CVSSv4
VulDB Vector: 🔒VulDB Reliability: 🔍
CVSSv3
VulDB Meta Base Score: 9.9VulDB Meta Temp Score: 9.5
VulDB Base Score: 9.9
VulDB Temp Score: 9.5
VulDB Vector: 🔒
VulDB Reliability: 🔍
CVSSv2
| AV | AC | Au | C | I | A |
|---|---|---|---|---|---|
| 💳 | 💳 | 💳 | 💳 | 💳 | 💳 |
| 💳 | 💳 | 💳 | 💳 | 💳 | 💳 |
| 💳 | 💳 | 💳 | 💳 | 💳 | 💳 |
| Vector | Complexity | Authentication | Confidentiality | Integrity | Availability |
|---|---|---|---|---|---|
| Unlock | Unlock | Unlock | Unlock | Unlock | Unlock |
| Unlock | Unlock | Unlock | Unlock | Unlock | Unlock |
| Unlock | Unlock | Unlock | Unlock | Unlock | Unlock |
VulDB Base Score: 🔒
VulDB Temp Score: 🔒
VulDB Reliability: 🔍
Exploiting
Class: Improper authorizationCWE: CWE-285 / CWE-266
CAPEC: 🔒
ATT&CK: 🔒
Physical: No
Local: No
Remote: Yes
Availability: 🔒
Status: Not defined
Price Prediction: 🔍
Current Price Estimation: 🔒
| 0-Day | Unlock | Unlock | Unlock | Unlock |
|---|---|---|---|---|
| Today | Unlock | Unlock | Unlock | Unlock |
Threat Intelligence
Interest: 🔍Active Actors: 🔍
Active APT Groups: 🔍
Countermeasures
Recommended: UpgradeStatus: 🔍
0-Day Time: 🔒
Upgrade: Kernel 6.12.117/6.18.61/7.3.2/7.4-rc1
Patch: b150049dffd0865fb6e60ce843299216687f02ad/7f30b886c5a1a2b3d9342ea82d0699eff812a472/8c5f62dd9a0b61e0082d419796e0743e820bd002/798214e6fafcdcc29f5ba2661a473232b5e70cfb
Timeline
09/25/2026 CVE reserved11/19/2026 Advisory disclosed
11/19/2026 VulDB entry created
11/19/2026 VulDB entry last update
Sources
Vendor: kernel.orgAdvisory: git.kernel.org
Status: Confirmed
CNA: Linux
CVE: CVE-2026-99531 (🔒)
GCVE (CVE): GCVE-0-2026-99531
GCVE (VulDB): GCVE-100-440349
Entry
Created: 11/19/2026 16:36Changes: 11/19/2026 16:36 (59)
Complete: 🔍
Cache ID: 216::103
If you want to get the best quality for vulnerability data then you always have to consider VulDB.
No comments yet. Languages: en.
Please log in to comment.