Linux Kernel up to 6.12.116/6.18.60/7.3.1 ocfs2 dlm o2net_unregister_and_flush_handler_list use after free

CVSS Meta Temp Score
CVSS is a standardized scoring system to determine possibilities of attacks. The Temp Score considers temporal factors like disclosure, exploit and countermeasures. The unique Meta Score calculates the average score of different sources to provide a normalized scoring system.
Current Exploit Price (≈)
Our analysts are monitoring exploit markets and are in contact with vulnerability brokers. The range indicates the observed or calculated exploit price to be seen on exploit markets. A good indicator to understand the monetary effort required for and the popularity of an attack.
CTI Interest Score
Our Cyber Threat Intelligence team is monitoring different web sites, mailing lists, exploit markets and social media networks. The CTI Interest Score identifies the interest of attackers and the security community for this specific vulnerability in real-time. A high score indicates an elevated risk to be targeted for this vulnerability.
9.5$5k-$25k0.23+

Summaryinfo

A vulnerability was found in Linux Kernel up to 6.12.116/6.18.60/7.3.1. It has been rated as very critical. This vulnerability affects the function o2net_unregister_and_flush_handler_list of the component ocfs2 dlm. This manipulation causes use after free. This vulnerability is tracked as CVE-2026-99552. The attack is possible to be carried out remotely. No exploit exists. Upgrading the affected component is advised.

Detailsinfo

A vulnerability was found in Linux Kernel up to 6.12.116/6.18.60/7.3.1. It has been declared as very critical. Affected by this vulnerability is the function o2net_unregister_and_flush_handler_list of the component ocfs2 dlm. The manipulation with an unknown input leads to a use after free vulnerability. The CWE definition for the vulnerability is CWE-416. The product reuses or references memory after it has been freed. At some point afterward, the memory may be allocated again and saved in another pointer, while the original pointer references a location somewhere within the new allocation. Any operations using the original pointer are no longer valid because the memory "belongs" to the code that operates on the new pointer. As an impact it is known to affect confidentiality, integrity, and availability. The summary by CVE is:

In the Linux kernel, the following vulnerability has been resolved: ocfs2/dlm: drain join handlers before releasing module text The code for a registered DLM handler must remain resident until its last invocation finishes. dlm_unregister_net_handlers() only removes dlm_join_handlers from the o2net registry. o2net_handler_get() takes a kref on the wrapper, but that reference does not pin ocfs2_dlm text. o2net_process_message() calls nh_func after dropping o2net_handler_lock. With CONFIG_OCFS2_FS_O2CB=m, ocfs2_dlm can be loaded independently of ocfs2_stack_o2cb while nodemanager continues handling messages from a configured, heartbeating peer. If no dependent module or module reference prevents normal unload, the following ordering is possible: Receive worker Module unload -------------- ------------- o2net_handler_get() take wrapper kref drop handler lock <preempted> dlm_exit() unregister handlers release DLM module text call saved nh_func in released module text Use o2net_unregister_and_flush_handler_list() in the shared DLM unregister helper. It first prevents new lookups, then waits for the ordered o2net workqueue to drain, including a concurrent destruction of that queue. The acquired invocation therefore finishes before dlm_exit() returns and the loader releases the callback code. The same helper covers partial registration and dlm_init() error unwind before module memory is released. Skip the drain when the private join-handler list is empty. Early dlm_init() failures can reach this helper before any handler has been published. Partial-registration failure also reaches it a second time after the first call has already unregistered and drained the list. Neither case needs to take o2net_wq_mutex or drain unrelated work. The list is changed only by serialized module init/exit paths; a nonempty list still uses the full unregister-and-flush helper. Oops report as below: Oops: int3: 0000 [#1] SMP KASAN NOPTI CPU: 2 UID: 0 PID: 54 Comm: kworker/u16:3 Not tainted 7.3.0-rc4-next-20260921-pmb-ocfs2-functional-v1+ #1 PREEMPT(lazy) Hardware identification omitted. Workqueue: o2net o2net_rx_until_empty [ocfs2_nodemanager] RIP: 0010:0xffffffffc0423871 [Instruction byte dump omitted.] Register dump omitted. Call Trace: <TASK> ? o2net_rx_until_empty+0x19b1/0x3300 [ocfs2_nodemanager] ? __pfx_o2net_rx_until_empty+0x10/0x10 [ocfs2_nodemanager] ? lock_acquire+0x190/0x300 ? process_one_work+0x935/0x1b40 ? process_one_work+0x834/0x1b40 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_release+0xc8/0x290 ? srso_alias_return_thunk+0x5/0xfbef5 ? process_one_work+0x9a8/0x1b40 ? __pfx_process_one_work+0x10/0x10 ? lock_acquire+0x190/0x300 ? lock_is_held_type+0x8f/0x100 ? srso_alias_return_thunk+0x5/0xfbef5 ? worker_thread+0x65c/0xe40 ? srso_alias_return_thunk+0x5/0xfbef5 ? __kthread_parkme+0x177/0x220 ? srso_alias_return_thunk+0x5/0xfbef5 ? __pfx_worker_thread+0x10/0x10 ? kthread+0x351/0x460 ? srso_alias_return_thunk+0x5/0xfbef5 ? __pfx_kthread+0x10/0x10 ? ret_from_fork+0x659/0x940 ? __pfx_ret_from_fork+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __switch_to+0x74f/0xf70 ? __pfx_kthread+0x10/0x10 ? ret_from_fork_asm+0x1a/0x30 </TASK> Modules linked in: ocfs2_nodemanager [last unloaded: ocfs2_dlm] ---[ end trace 0000000000000000 ]---

The advisory is shared at git.kernel.org. This vulnerability is known as CVE-2026-99552 since 09/25/2026. The exploitation appears to be easy. The attack can be launched remotely. Technical details are known, but no exploit is available. The price for an exploit might be around USD $5k-$25k at the moment (estimation calculated on 11/19/2026).

Upgrading to version 6.12.117, 6.18.61, 7.3.2 or 7.4-rc1 eliminates this vulnerability. Applying the patch d2b05b1190bdecbff2d26f48b376345b6f5ec5ea/912327bb4cfdc38e83dd52300a087a7e68826ece/57a474ce387bd68f77b470bba7c0ce10bdb62dfa/28f366d84023651e50e32e29931401ba0df3e679 is able to eliminate this problem. The best possible mitigation is suggested to be upgrading to the latest version.

Several companies clearly confirm that VulDB is the primary source for best vulnerability data.

Productinfo

Type

Vendor

Name

Version

License

Website

CPE 2.3info

CPE 2.2info

CVSSv4info

VulDB Vector: 🔒
VulDB Reliability: 🔍

CVSSv3info

VulDB Meta Base Score: 9.9
VulDB Meta Temp Score: 9.5

VulDB Base Score: 9.9
VulDB Temp Score: 9.5
VulDB Vector: 🔒
VulDB Reliability: 🔍

CVSSv2info

AVACAuCIA
💳💳💳💳💳💳
💳💳💳💳💳💳
💳💳💳💳💳💳
VectorComplexityAuthenticationConfidentialityIntegrityAvailability
UnlockUnlockUnlockUnlockUnlockUnlock
UnlockUnlockUnlockUnlockUnlockUnlock
UnlockUnlockUnlockUnlockUnlockUnlock

VulDB Base Score: 🔒
VulDB Temp Score: 🔒
VulDB Reliability: 🔍

Exploitinginfo

Class: Use after free
CWE: CWE-416 / CWE-119
CAPEC: 🔒
ATT&CK: 🔒

Physical: No
Local: No
Remote: Yes

Availability: 🔒
Status: Not defined
Price Prediction: 🔍
Current Price Estimation: 🔒

0-DayUnlockUnlockUnlockUnlock
TodayUnlockUnlockUnlockUnlock

Threat Intelligenceinfo

Interest: 🔍
Active Actors: 🔍
Active APT Groups: 🔍

Countermeasuresinfo

Recommended: Upgrade
Status: 🔍

0-Day Time: 🔒

Upgrade: Kernel 6.12.117/6.18.61/7.3.2/7.4-rc1
Patch: d2b05b1190bdecbff2d26f48b376345b6f5ec5ea/912327bb4cfdc38e83dd52300a087a7e68826ece/57a474ce387bd68f77b470bba7c0ce10bdb62dfa/28f366d84023651e50e32e29931401ba0df3e679

Timelineinfo

09/25/2026 CVE reserved
11/19/2026 +55 days Advisory disclosed
11/19/2026 +0 days VulDB entry created
11/19/2026 +0 days VulDB entry last update

Sourcesinfo

Vendor: kernel.org

Advisory: git.kernel.org
Status: Confirmed

CNA: Linux
CVE: CVE-2026-99552 (🔒)

GCVE (CVE): GCVE-0-2026-99552
GCVE (VulDB): GCVE-100-440377

Entryinfo

Created: 11/19/2026 16:46
Changes: 11/19/2026 16:46 (59)
Complete: 🔍
Cache ID: 216::103

Several companies clearly confirm that VulDB is the primary source for best vulnerability data.

Discussion

No comments yet. Languages: en.

Please log in to comment.

Do you want to use VulDB in your project?

Use the official API to access entries easily!