Linux Kernel up to 6.12.117/6.18.63/7.3.4/7.4-rc1 nVMX infinite loop

| CVSS Meta Temp Score | Current Exploit Price (≈) | CTI Interest Score |
|---|---|---|
| 8.7 | $0-$5k | 0.00+ |
Summary
A vulnerability has been found in Linux Kernel up to 6.12.117/6.18.63/7.3.4/7.4-rc1 and classified as very critical. The impacted element is an unknown function of the component nVMX. Performing a manipulation results in infinite loop. This vulnerability is cataloged as CVE-2026-99711. It is possible to initiate the attack remotely. There is no exploit available. The affected component should be upgraded.
Details
A vulnerability, which was classified as very critical, was found in Linux Kernel up to 6.12.117/6.18.63/7.3.4/7.4-rc1. This affects an unknown part of the component nVMX. The manipulation with an unknown input leads to a infinite loop vulnerability. CWE is classifying the issue as CWE-835. The product contains an iteration or loop with an exit condition that cannot be reached, i.e., an infinite loop. This is going to have an impact on confidentiality, integrity, and availability. The summary by CVE is:
In the Linux kernel, the following vulnerability has been resolved: KVM: nVMX: Process each host MSR entry at most once when unwinding failed VM-Entry Add a missing "break" in the inner for-loop of the open coded mess that unwinds MSRs back to the pre-VM-Enter state when VMLAUNCH/VMRESUME VM-Fails due to a consistency check that is caught by hardware but missed by KVM. I.e. move on to the next MSR in the VM-Entry load list after performing a write using a value found in the VM-Exit load list. Processing *every* matching entry in the VM-Exit load list makes the processing quadratic, which is problematic if the load lists are full of MSRs that are expensive to emulate. E.g. writing APIC_BASE triggers kvm_recalculate_apic_map() and a whole pile of unnecessary work. Functionally, arbitrarily restoring the value of the first matching entry is "fine", because none of this is architecturally correct: the load lists are never supposed to have been used in the first place. In practice, it's likely a moot point as no well-behaved VMM will have multiple, diverging entries in the load lists.
The advisory is shared at git.kernel.org. This vulnerability is uniquely identified as CVE-2026-99711 since 09/25/2026. The exploitability is told to be easy. It is possible to initiate the attack remotely. Additional levels of successful authentication are needed for exploitation. Neither technical details nor an exploit are publicly available. The price for an exploit might be around USD $0-$5k at the moment (estimation calculated on 11/20/2026). MITRE ATT&CK project uses the attack technique T1499 for this issue.
Upgrading to version 6.12.118, 6.18.64, 7.3.5 or 7.4-rc2 eliminates this vulnerability. Applying the patch 05fae367c6878d08f54a7c5bb6986a5e57e9bd1c/42b98982aedf40f5076bf045bf359df4dea09468/6a4697ec81693f8db41a1c3ba81f3b9b2510879f/c33ef9d334059f7cb167569ed7b4779752fe4425 is able to eliminate this problem. The best possible mitigation is suggested to be upgrading to the latest version.
Several companies clearly confirm that VulDB is the primary source for best vulnerability data.
Product
Type
Vendor
Name
Version
- 6.12.117
- 6.18.0
- 6.18.1
- 6.18.2
- 6.18.3
- 6.18.4
- 6.18.5
- 6.18.6
- 6.18.7
- 6.18.8
- 6.18.9
- 6.18.10
- 6.18.11
- 6.18.12
- 6.18.13
- 6.18.14
- 6.18.15
- 6.18.16
- 6.18.17
- 6.18.18
- 6.18.19
- 6.18.20
- 6.18.21
- 6.18.22
- 6.18.23
- 6.18.24
- 6.18.25
- 6.18.26
- 6.18.27
- 6.18.28
- 6.18.29
- 6.18.30
- 6.18.31
- 6.18.32
- 6.18.33
- 6.18.34
- 6.18.35
- 6.18.36
- 6.18.37
- 6.18.38
- 6.18.39
- 6.18.40
- 6.18.41
- 6.18.42
- 6.18.43
- 6.18.44
- 6.18.45
- 6.18.46
- 6.18.47
- 6.18.48
- 6.18.49
- 6.18.50
- 6.18.51
- 6.18.52
- 6.18.53
- 6.18.54
- 6.18.55
- 6.18.56
- 6.18.57
- 6.18.58
- 6.18.59
- 6.18.60
- 6.18.61
- 6.18.62
- 6.18.63
- 7.3.0
- 7.3.1
- 7.3.2
- 7.3.3
- 7.3.4
- 7.4-rc1
License
Website
- Vendor: https://www.kernel.org/
CPE 2.3
CPE 2.2
CVSSv4
VulDB Vector: 🔒VulDB Reliability: 🔍
CVSSv3
VulDB Meta Base Score: 9.1VulDB Meta Temp Score: 8.7
VulDB Base Score: 9.1
VulDB Temp Score: 8.7
VulDB Vector: 🔒
VulDB Reliability: 🔍
CVSSv2
| AV | AC | Au | C | I | A |
|---|---|---|---|---|---|
| 💳 | 💳 | 💳 | 💳 | 💳 | 💳 |
| 💳 | 💳 | 💳 | 💳 | 💳 | 💳 |
| 💳 | 💳 | 💳 | 💳 | 💳 | 💳 |
| Vector | Complexity | Authentication | Confidentiality | Integrity | Availability |
|---|---|---|---|---|---|
| Unlock | Unlock | Unlock | Unlock | Unlock | Unlock |
| Unlock | Unlock | Unlock | Unlock | Unlock | Unlock |
| Unlock | Unlock | Unlock | Unlock | Unlock | Unlock |
VulDB Base Score: 🔒
VulDB Temp Score: 🔒
VulDB Reliability: 🔍
Exploiting
Class: Infinite loopCWE: CWE-835 / CWE-404
CAPEC: 🔒
ATT&CK: 🔒
Physical: No
Local: No
Remote: Yes
Availability: 🔒
Status: Not defined
Price Prediction: 🔍
Current Price Estimation: 🔒
| 0-Day | Unlock | Unlock | Unlock | Unlock |
|---|---|---|---|---|
| Today | Unlock | Unlock | Unlock | Unlock |
Threat Intelligence
Interest: 🔍Active Actors: 🔍
Active APT Groups: 🔍
Countermeasures
Recommended: UpgradeStatus: 🔍
0-Day Time: 🔒
Upgrade: Kernel 6.12.118/6.18.64/7.3.5/7.4-rc2
Patch: 05fae367c6878d08f54a7c5bb6986a5e57e9bd1c/42b98982aedf40f5076bf045bf359df4dea09468/6a4697ec81693f8db41a1c3ba81f3b9b2510879f/c33ef9d334059f7cb167569ed7b4779752fe4425
Timeline
09/25/2026 CVE reserved11/20/2026 Advisory disclosed
11/20/2026 VulDB entry created
11/20/2026 VulDB entry last update
Sources
Vendor: kernel.orgAdvisory: git.kernel.org
Status: Confirmed
CNA: Linux
CVE: CVE-2026-99711 (🔒)
GCVE (CVE): GCVE-0-2026-99711
GCVE (VulDB): GCVE-100-441129
Entry
Created: 11/20/2026 08:04Changes: 11/20/2026 08:04 (58)
Complete: 🔍
Cache ID: 216::103
Several companies clearly confirm that VulDB is the primary source for best vulnerability data.
No comments yet. Languages: en.
Please log in to comment.