Linux Kernel up to 6.12.5 netem qlen reference count

Summaryinfo

A vulnerability was found in Linux Kernel up to 6.12.5. It has been classified as critical. The affected element is an unknown function of the component netem. The manipulation of the argument qlen leads to reference count. This vulnerability is listed as CVE-2024-56770. There is no available exploit. Upgrading the affected component is recommended.

Detailsinfo

A vulnerability was found in Linux Kernel up to 6.12.5 and classified as critical. This issue affects an unknown code block of the component netem. The manipulation of the argument qlen with an unknown input leads to a reference count vulnerability. Using CWE to declare the problem leads to CWE-911. The product uses a reference count to manage a resource, but it does not update or incorrectly updates the reference count. Impacted is confidentiality, integrity, and availability. The summary by CVE is:

In the Linux kernel, the following vulnerability has been resolved: net/sched: netem: account for backlog updates from child qdisc In general, 'qlen' of any classful qdisc should keep track of the number of packets that the qdisc itself and all of its children holds. In case of netem, 'qlen' only accounts for the packets in its internal tfifo. When netem is used with a child qdisc, the child qdisc can use 'qdisc_tree_reduce_backlog' to inform its parent, netem, about created or dropped SKBs. This function updates 'qlen' and the backlog statistics of netem, but netem does not account for changes made by a child qdisc. 'qlen' then indicates the wrong number of packets in the tfifo. If a child qdisc creates new SKBs during enqueue and informs its parent about this, netem's 'qlen' value is increased. When netem dequeues the newly created SKBs from the child, the 'qlen' in netem is not updated. If 'qlen' reaches the configured sch->limit, the enqueue function stops working, even though the tfifo is not full. Reproduce the bug: Ensure that the sender machine has GSO enabled. Configure netem as root qdisc and tbf as its child on the outgoing interface of the machine as follows: $ tc qdisc add dev root handle 1: netem delay 100ms limit 100 $ tc qdisc add dev parent 1:0 tbf rate 50Mbit burst 1542 latency 50ms Send bulk TCP traffic out via this interface, e.g., by running an iPerf3 client on the machine. Check the qdisc statistics: $ tc -s qdisc show dev Statistics after 10s of iPerf3 TCP test before the fix (note that netem's backlog > limit, netem stopped accepting packets): qdisc netem 1: root refcnt 2 limit 1000 delay 100ms Sent 2767766 bytes 1848 pkt (dropped 652, overlimits 0 requeues 0) backlog 4294528236b 1155p requeues 0 qdisc tbf 10: parent 1:1 rate 50Mbit burst 1537b lat 50ms Sent 2767766 bytes 1848 pkt (dropped 327, overlimits 7601 requeues 0) backlog 0b 0p requeues 0 Statistics after the fix: qdisc netem 1: root refcnt 2 limit 1000 delay 100ms Sent 37766372 bytes 24974 pkt (dropped 9, overlimits 0 requeues 0) backlog 0b 0p requeues 0 qdisc tbf 10: parent 1:1 rate 50Mbit burst 1537b lat 50ms Sent 37766372 bytes 24974 pkt (dropped 327, overlimits 96017 requeues 0) backlog 0b 0p requeues 0 tbf segments the GSO SKBs (tbf_segment) and updates the netem's 'qlen'. The interface fully stops transferring packets and "locks". In this case, the child qdisc and tfifo are empty, but 'qlen' indicates the tfifo is at its limit and no more packets are accepted. This patch adds a counter for the entries in the tfifo. Netem's 'qlen' is only decreased when a packet is returned by its dequeue function, and not during enqueuing into the child qdisc. External updates to 'qlen' are thus accounted for and only the behavior of the backlog statistics changes. As in other qdiscs, 'qlen' then keeps track of how many packets are held in netem and all of its children. As before, sch->limit remains as the maximum number of packets in the tfifo. The same applies to netem's backlog statistics.

The advisory is shared at git.kernel.org. The identification of this vulnerability is CVE-2024-56770 since 12/29/2024. Technical details are known, but no exploit is available. The price for an exploit might be around USD $0-$5k at the moment (estimation calculated on 11/24/2025).

The vulnerability scanner Nessus provides a plugin with the ID 216985 (Debian dla-4076 : linux-config-6.1 - security update), which helps to determine the existence of the flaw in a target environment.

Upgrading to version 5.4.288, 5.10.232, 5.15.175, 6.1.121, 6.6.67 or 6.12.6 eliminates this vulnerability. Applying the patch 83c6ab12f08dcc09d4c5ac86fdb89736b28f1d31/216509dda290f6db92c816dd54b83c1df9da9e76/c2047b0e216c8edce227d7c42f99ac2877dad0e4/10df49cfca73dfbbdb6c4150d859f7e8926ae427/3824c5fad18eeb7abe0c4fc966f29959552dca3e/356078a5c55ec8d2061fcc009fb8599f5b0527f9/f8d4bc455047cf3903cd6f85f49978987dbb3027 is able to eliminate this problem. The bugfix is ready for download at git.kernel.org. The best possible mitigation is suggested to be upgrading to the latest version.

The vulnerability is also documented in the databases at Tenable (216985) and CERT Bund (WID-SEC-2025-0035). If you want to get the best quality for vulnerability data then you always have to consider VulDB.

Affected

• Debian Linux
• Google Cloud Platform
• Red Hat Enterprise Linux
• Ubuntu Linux
• SUSE Linux
• Oracle Linux
• RESF Rocky Linux
• Open Source Linux Kernel

Productinfo

Type

• Operating System

Vendor

• Linux

Name

• Kernel

Version

• 5.4.287
• 5.10.231
• 5.15.174
• 6.1.120
• 6.6.0
• 6.6.1
• 6.6.2
• 6.6.3
• 6.6.4
• 6.6.5
• 6.6.6
• 6.6.7
• 6.6.8
• 6.6.9
• 6.6.10
• 6.6.11
• 6.6.12
• 6.6.13
• 6.6.14
• 6.6.15
• 6.6.16
• 6.6.17
• 6.6.18
• 6.6.19
• 6.6.20
• 6.6.21
• 6.6.22
• 6.6.23
• 6.6.24
• 6.6.25
• 6.6.26
• 6.6.27
• 6.6.28
• 6.6.29
• 6.6.30
• 6.6.31
• 6.6.32
• 6.6.33
• 6.6.34
• 6.6.35
• 6.6.36
• 6.6.37
• 6.6.38
• 6.6.39
• 6.6.40
• 6.6.41
• 6.6.42
• 6.6.43
• 6.6.44
• 6.6.45
• 6.6.46
• 6.6.47
• 6.6.48
• 6.6.49
• 6.6.50
• 6.6.51
• 6.6.52
• 6.6.53
• 6.6.54
• 6.6.55
• 6.6.56
• 6.6.57
• 6.6.58
• 6.6.59
• 6.6.60
• 6.6.61
• 6.6.62
• 6.6.63
• 6.6.64
• 6.6.65
• 6.6.66
• 6.12.0
• 6.12.1
• 6.12.2
• 6.12.3
• 6.12.4
• 6.12.5

License

• open-source

Website

• Vendor: https://www.kernel.org/

CPE 2.3info

• 🔍
• 🔍
• 🔍

CPE 2.2info

• 🔍
• 🔍
• 🔍

CVSSv4info

CVSSv3info

CVSSv2info

Exploitinginfo

Threat Intelligenceinfo

Countermeasuresinfo

Timelineinfo

Sourcesinfo

Entryinfo

If you want to get the best quality for vulnerability data then you always have to consider VulDB.

Discussion