Linux Kernel up to 6.12.111/6.18.54/7.2.8/7.3-rc4 vfio-ap vfio_ap_mdev_reset_queue memory leak

CVSS Meta Temp Score CVSS is a standardized scoring system to determine possibilities of attacks. The Temp Score considers temporal factors like disclosure, exploit and countermeasures. The unique Meta Score calculates the average score of different sources to provide a normalized scoring system.	Current Exploit Price (≈) Our analysts are monitoring exploit markets and are in contact with vulnerability brokers. The range indicates the observed or calculated exploit price to be seen on exploit markets. A good indicator to understand the monetary effort required for and the popularity of an attack.	CTI Interest Score Our Cyber Threat Intelligence team is monitoring different web sites, mailing lists, exploit markets and social media networks. The CTI Interest Score identifies the interest of attackers and the security community for this specific vulnerability in real-time. A high score indicates an elevated risk to be targeted for this vulnerability.
3.3	$0-$5k	1.81-

Summaryinfo

A vulnerability, which was classified as problematic, has been found in Linux Kernel up to 6.12.111/6.18.54/7.2.8/7.3-rc4. Affected by this issue is the function vfio_ap_mdev_reset_queue of the component vfio-ap. Performing a manipulation results in memory leak. This vulnerability is known as CVE-2026-98473. Attacking locally is a requirement. No exploit is available. It is advisable to upgrade the affected component.

Detailsinfo

A vulnerability was found in Linux Kernel up to 6.12.111/6.18.54/7.2.8/7.3-rc4. It has been classified as problematic. This affects the function vfio_ap_mdev_reset_queue of the component vfio-ap. The manipulation with an unknown input leads to a memory leak vulnerability. CWE is classifying the issue as CWE-401. The product does not sufficiently track and release allocated memory after it has been used, which slowly consumes remaining memory. This is going to have an impact on integrity, and availability. The summary by CVE is:

In the Linux kernel, the following vulnerability has been resolved: s390/vfio-ap: fix KVM GISC and page leak when queue removed from host config Three related problems exist in the handling of KVM interrupt and page resources when a queue is removed from the host's AP configuration while assigned to a mediated device (mdev). Problem 1: ~~~~~~~~~ AP_RESPONSE_Q_NOT_AVAIL not handled in vfio_ap_mdev_reset_queue() When the AP bus removes a queue device whose adapter or domain has been removed from the host's AP configuration, vfio_ap_mdev_remove_queue() is called. If the queue is still in the host's AP configuration at that point, it calls vfio_ap_mdev_reset_queue(), which issues a PQAP(ZAPQ). Since the adapter is already gone from the host configuration, ap_zapq() returns AP_RESPONSE_Q_NOT_AVAIL (0x01). This response code is not handled in vfio_ap_mdev_reset_queue()'s switch statement and falls through to the default case, which issues a WARN but does not call vfio_ap_free_aqic_resources(). As a result, if IRQ handling was enabled for the queue by the guest, the KVM GISC registration and the pinned guest page holding the notification indicator byte (NIB) are both leaked. This is fixed by adding AP_RESPONSE_Q_NOT_AVAIL to the same case as AP_RESPONSE_DECONFIGURED and AP_RESPONSE_CHECKSTOPPED in vfio_ap_mdev_reset_queue(). Like those response codes, Q_NOT_AVAIL indicates the queue is not operational and no further reset attempts are possible; the correct action is to free the IRQ resources immediately. Problem 2: ~~~~~~~~~ AP_RESPONSE_Q_NOT_AVAIL not handled in apq_status_check() In vfio_ap_mdev_reset_queue(), there are four cases that indicate a queue reset has not yet completed, in which case apq_reset_check() is queued to a work queue to verify completion of the reset operation. This function uses the PQAP(TAPQ) function to get the queue's status and calls apq_status_check() to verify whether the reset has completed, failed or needs to be executed again. As described in Problem #1 above, apq_reset_check() does not specifically check for AP_RESPONSE_Q_NOT_AVAIL, thereby potentially leaking KVM GISC registration and the pinned guest page holding the NIB. This is fixed by adding a case statement for AP_RESPONSE_Q_NOT_AVAIL to apq_status_check() and returning -ENODEV for that case. The caller, apq_reset_check() will then check for this return code and call vfio_ap_free_aqic_resources() to prevent the leak. Problem 3: ~~~~~~~~~ vfio_ap_free_aqic_resources() leaks saved_isc when kvm is NULL vfio_ap_free_aqic_resources() guards the call to kvm_s390_gisc_unregister() with: if (q->saved_isc != VFIO_AP_ISC_INVALID && !WARN_ON(!(q->matrix_mdev && q->matrix_mdev->kvm))) If matrix_mdev->kvm is NULL -- which can happen when vfio_ap_mdev_unset_kvm() has already run and cleared kvm before a subsequent cleanup path reaches this function -- the WARN_ON fires and the entire block is skipped. This leaves q->saved_isc set to a non-invalid value, creating a potential double-free on any subsequent call to this function. When kvm is NULL the KVM guest is already torn down, so kvm_s390_gisc_unregister() need not and cannot be called; however, q->saved_isc must always be cleared. Fix this by separating the kvm_s390_gisc_unregister() call from the q->saved_isc reset. The WARN_ON now guards only the genuinely impossible case of matrix_mdev being NULL. A NULL kvm is handled gracefully by skipping only the unregister call, and q->saved_isc = VFIO_AP_ISC_INVALID is set unconditionally whenever saved_isc was not already invalid. Additionally, add an else clause to the host-config check in vfio_ap_mdev_remove_queue() to call vfio_ap_free_aqic_resources() directly when the queue is not in the host's AP configuration. This serves as a backstop: when the AP bus fires the driver .remove callback after an adapter is removed from the host config, the queue is by definition no longer addressable, so vfio_ap_mdev_reset_queue ---truncated---

It is possible to read the advisory at git.kernel.org. This vulnerability is uniquely identified as CVE-2026-98473 since 09/25/2026. The exploitability is told to be easy. Attacking locally is a requirement. The exploitation requires an enhanced level of successful authentication. Technical details of the vulnerability are known, but there is no available exploit.

Upgrading to version 6.12.112, 6.18.55, 7.2.9 or 7.3-rc5 eliminates this vulnerability. Applying the patch da69d3ac53490724eba0ade9deb4e539a6ae9034/cf441a0db681dfad5e89b015d6be11365159d7a9/3c3433657c82f200dae36c29e2b80681c81b85be/65e05ec252a9b79e75930d3c4dd42d8877db04c5 is able to eliminate this problem. The best possible mitigation is suggested to be upgrading to the latest version.

Statistical analysis made it clear that VulDB provides the best quality for vulnerability data.

Productinfo

Type

• Operating System

Vendor

• Linux

Name

• Kernel

Version

• 6.12.111
• 6.18.0
• 6.18.1
• 6.18.2
• 6.18.3
• 6.18.4
• 6.18.5
• 6.18.6
• 6.18.7
• 6.18.8
• 6.18.9
• 6.18.10
• 6.18.11
• 6.18.12
• 6.18.13
• 6.18.14
• 6.18.15
• 6.18.16
• 6.18.17
• 6.18.18
• 6.18.19
• 6.18.20
• 6.18.21
• 6.18.22
• 6.18.23
• 6.18.24
• 6.18.25
• 6.18.26
• 6.18.27
• 6.18.28
• 6.18.29
• 6.18.30
• 6.18.31
• 6.18.32
• 6.18.33
• 6.18.34
• 6.18.35
• 6.18.36
• 6.18.37
• 6.18.38
• 6.18.39
• 6.18.40
• 6.18.41
• 6.18.42
• 6.18.43
• 6.18.44
• 6.18.45
• 6.18.46
• 6.18.47
• 6.18.48
• 6.18.49
• 6.18.50
• 6.18.51
• 6.18.52
• 6.18.53
• 6.18.54
• 7.2.0
• 7.2.1
• 7.2.2
• 7.2.3
• 7.2.4
• 7.2.5
• 7.2.6
• 7.2.7
• 7.2.8
• 7.3-rc1
• 7.3-rc2
• 7.3-rc3
• 7.3-rc4

License

• open-source

Website

• Vendor: https://www.kernel.org/

CPE 2.3info

• 🔒
• 🔒
• 🔒

CPE 2.2info

• 🔒
• 🔒
• 🔒

CVSSv4info

VulDB Vector: 🔒
VulDB Reliability: 🔍

CVSSv3info

VulDB Meta Base Score: 3.4
VulDB Meta Temp Score: 3.3

VulDB Base Score: 3.4
VulDB Temp Score: 3.3
VulDB Vector: 🔒
VulDB Reliability: 🔍

CVSSv2info

AV	AC	Au	C	I	A
💳	💳	💳	💳	💳	💳
💳	💳	💳	💳	💳	💳
💳	💳	💳	💳	💳	💳

Vector	Complexity	Authentication	Confidentiality	Integrity	Availability
Unlock	Unlock	Unlock	Unlock	Unlock	Unlock
Unlock	Unlock	Unlock	Unlock	Unlock	Unlock
Unlock	Unlock	Unlock	Unlock	Unlock	Unlock

VulDB Base Score: 🔒
VulDB Temp Score: 🔒
VulDB Reliability: 🔍

Exploitinginfo

Class: Memory leak
CWE: CWE-401 / CWE-404
CAPEC: 🔒
ATT&CK: 🔒

Physical: Partially
Local: Yes
Remote: No

Availability: 🔒
Status: Not defined
Price Prediction: 🔍
Current Price Estimation: 🔒

0-Day	Unlock	Unlock	Unlock	Unlock
Today	Unlock	Unlock	Unlock	Unlock

Threat Intelligenceinfo

Interest: 🔍
Active Actors: 🔍
Active APT Groups: 🔍

Countermeasuresinfo

Recommended: Upgrade
Status: 🔍

0-Day Time: 🔒

Upgrade: Kernel 6.12.112/6.18.55/7.2.9/7.3-rc5
Patch: da69d3ac53490724eba0ade9deb4e539a6ae9034/cf441a0db681dfad5e89b015d6be11365159d7a9/3c3433657c82f200dae36c29e2b80681c81b85be/65e05ec252a9b79e75930d3c4dd42d8877db04c5

Timelineinfo

09/25/2026 CVE reserved
10/18/2026 +23 days Advisory disclosed
10/18/2026 +0 days VulDB entry created
10/18/2026 +0 days VulDB entry last update

Sourcesinfo

Vendor: kernel.org

Advisory: git.kernel.org
Status: Confirmed

CVE: CVE-2026-98473 (🔒)
GCVE (CVE): GCVE-0-2026-98473
GCVE (VulDB): GCVE-100-422115

Entryinfo

Created: 10/18/2026 20:28
Changes: 10/18/2026 20:28 (59)
Complete: 🔍
Cache ID: 216::103

Statistical analysis made it clear that VulDB provides the best quality for vulnerability data.

Discussion

Want to know what is going to be exploited?

We predict KEV entries!