Linux Kernel up to 6.12.117/6.18.63/7.3.4/7.4-rc1 ocfs2/cluster sc_seq_show use after free

| CVSS Meta Temp Score | Current Exploit Price (≈) | CTI Interest Score |
|---|---|---|
| 8.7 | $5k-$25k | 0.00+ |
Summary
A vulnerability has been found in Linux Kernel up to 6.12.117/6.18.63/7.3.4/7.4-rc1 and classified as very critical. This vulnerability affects the function sc_seq_show of the component ocfs2/cluster. The manipulation leads to use after free.
This vulnerability is traded as CVE-2026-99691. It is possible to initiate the attack remotely. There is no exploit available.
The affected component should be upgraded.
Details
A vulnerability was found in Linux Kernel up to 6.12.117/6.18.63/7.3.4/7.4-rc1 and classified as very critical. This issue affects the function sc_seq_show of the component ocfs2/cluster. The manipulation with an unknown input leads to a use after free vulnerability. Using CWE to declare the problem leads to CWE-416. The product reuses or references memory after it has been freed. At some point afterward, the memory may be allocated again and saved in another pointer, while the original pointer references a location somewhere within the new allocation. Any operations using the original pointer are no longer valid because the memory "belongs" to the code that operates on the new pointer. Impacted is confidentiality, integrity, and availability. The summary by CVE is:
In the Linux kernel, the following vulnerability has been resolved: ocfs2/cluster: unlink socket containers before releasing resources A socket container's node and socket must remain alive while the container is on sock_containers. The debugfs formatter reads sc_node and sc_sock under o2net_debug_lock without taking their references, but sc_kref_release() releases both before taking that lock to unlink the container. With CONFIG_DEBUG_FS enabled, a synchronous sender can retain its last socket-container reference after o2net_disconnect_node() has detached the connection and flushed o2net_wq. The caller runs outside that workqueue. After the sender removes its configfs dependency, node removal can proceed without waiting for the sender's final sc_put(): Sender (final sc_put) Configfs rmdir Debugfs reader -------------------- -------------- -------------- o2nm_undepend_item() Drop node item refs o2nm_node_put() [node can be freed] sc_seq_show() Lock debug lock Read sc_node->nd_name Unlock debug lock sc_node = NULL o2net_debug_del_sc() The earlier socket release has a similar window. The container is still selectable while its socket has been released and sc_sock has not yet been cleared: Sender (final sc_put) Debugfs reader -------------------- -------------- sock_release(sc->sc_sock) [socket can be freed] sc_seq_show() Lock debug lock Read sc_sock->sk fields Unlock debug lock sc_sock = NULL ... o2net_debug_del_sc() Move o2net_debug_del_sc() before releasing either resource. Unlinking under the existing debug lock waits for an active formatter to finish and prevents later readers from selecting the container. This covers both socket fields and node fields, including nd_num in the stats formatter. KASAN report as below: BUG: KASAN: slab-use-after-free in string+0x42b/0x470 Read of size 1 at addr ffff88810f56fc90 by task python3/506 CPU: 0 UID: 0 PID: 506 Comm: python3 Not tainted 7.3.0-rc4-next-20260921-pmb-ocfs2-functional-v1+ #1 PREEMPT(lazy) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x93/0xd0 print_report+0xce/0x630 kasan_report+0xe0/0x110 string+0x42b/0x470 vsnprintf+0x330/0x1110 seq_printf+0x1a8/0x260 sc_seq_show+0x604/0x9f0 seq_read_iter+0x480/0x1110 seq_read+0x362/0x5a0 full_proxy_read+0x11f/0x180 vfs_read+0x1a0/0xc20 ksys_read+0x111/0x200 do_syscall_64+0x114/0x620 entry_SYSCALL_64_after_hwframe+0x77/0x7f (User register dump omitted.) </TASK> Allocated by task 497: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 __kmalloc_cache_noprof+0x28d/0x610 o2nm_node_group_make_item+0xea/0x1a0 configfs_mkdir+0x762/0xca0 vfs_mkdir+0x399/0x7e0 filename_mkdirat+0x129/0x450 __x64_sys_mkdir+0x70/0xa0 do_syscall_64+0x114/0x620 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 505: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x5f/0x80 kfree+0x308/0x580 config_item_cleanup+0x14b/0x230 config_item_put+0x79/0x90 sc_put+0x454/0x6e0 o2net_send_message_vec+0x63d/0x1560 o2net_send_message+0xa6/0xe0 validation_send_write+0x17f/0x1d0 full_proxy_write+0x11f/0x180 vfs_write+0x25a/0x1010 ksys_write+ ---truncated---
It is possible to read the advisory at git.kernel.org. The identification of this vulnerability is CVE-2026-99691 since 09/25/2026. The exploitation is known to be easy. The attack may be initiated remotely. Additional levels of successful authentication are needed for exploitation. Technical details of the vulnerability are known, but there is no available exploit. The pricing for an exploit might be around USD $5k-$25k at the moment (estimation calculated on 11/20/2026).
Upgrading to version 6.12.118, 6.18.64, 7.3.5 or 7.4-rc2 eliminates this vulnerability. Applying the patch 8dc77ad4253904eb768f1aff45bb870d6d5a6eb5/829a331e1b52053c6f2d880daaa2f2c0ee85580f/831f6f917f7e22068d850efc6443eca300a11f95/0988f0c0c7c908f0ff77fd8b90ce9918a1f41479 is able to eliminate this problem. The best possible mitigation is suggested to be upgrading to the latest version.
Statistical analysis made it clear that VulDB provides the best quality for vulnerability data.
Product
Type
Vendor
Name
Version
- 6.12.117
- 6.18.0
- 6.18.1
- 6.18.2
- 6.18.3
- 6.18.4
- 6.18.5
- 6.18.6
- 6.18.7
- 6.18.8
- 6.18.9
- 6.18.10
- 6.18.11
- 6.18.12
- 6.18.13
- 6.18.14
- 6.18.15
- 6.18.16
- 6.18.17
- 6.18.18
- 6.18.19
- 6.18.20
- 6.18.21
- 6.18.22
- 6.18.23
- 6.18.24
- 6.18.25
- 6.18.26
- 6.18.27
- 6.18.28
- 6.18.29
- 6.18.30
- 6.18.31
- 6.18.32
- 6.18.33
- 6.18.34
- 6.18.35
- 6.18.36
- 6.18.37
- 6.18.38
- 6.18.39
- 6.18.40
- 6.18.41
- 6.18.42
- 6.18.43
- 6.18.44
- 6.18.45
- 6.18.46
- 6.18.47
- 6.18.48
- 6.18.49
- 6.18.50
- 6.18.51
- 6.18.52
- 6.18.53
- 6.18.54
- 6.18.55
- 6.18.56
- 6.18.57
- 6.18.58
- 6.18.59
- 6.18.60
- 6.18.61
- 6.18.62
- 6.18.63
- 7.3.0
- 7.3.1
- 7.3.2
- 7.3.3
- 7.3.4
- 7.4-rc1
License
Website
- Vendor: https://www.kernel.org/
CPE 2.3
CPE 2.2
CVSSv4
VulDB Vector: 🔒VulDB Reliability: 🔍
CVSSv3
VulDB Meta Base Score: 9.1VulDB Meta Temp Score: 8.7
VulDB Base Score: 9.1
VulDB Temp Score: 8.7
VulDB Vector: 🔒
VulDB Reliability: 🔍
CVSSv2
| AV | AC | Au | C | I | A |
|---|---|---|---|---|---|
| 💳 | 💳 | 💳 | 💳 | 💳 | 💳 |
| 💳 | 💳 | 💳 | 💳 | 💳 | 💳 |
| 💳 | 💳 | 💳 | 💳 | 💳 | 💳 |
| Vector | Complexity | Authentication | Confidentiality | Integrity | Availability |
|---|---|---|---|---|---|
| Unlock | Unlock | Unlock | Unlock | Unlock | Unlock |
| Unlock | Unlock | Unlock | Unlock | Unlock | Unlock |
| Unlock | Unlock | Unlock | Unlock | Unlock | Unlock |
VulDB Base Score: 🔒
VulDB Temp Score: 🔒
VulDB Reliability: 🔍
Exploiting
Class: Use after freeCWE: CWE-416 / CWE-119
CAPEC: 🔒
ATT&CK: 🔒
Physical: No
Local: No
Remote: Yes
Availability: 🔒
Status: Not defined
Price Prediction: 🔍
Current Price Estimation: 🔒
| 0-Day | Unlock | Unlock | Unlock | Unlock |
|---|---|---|---|---|
| Today | Unlock | Unlock | Unlock | Unlock |
Threat Intelligence
Interest: 🔍Active Actors: 🔍
Active APT Groups: 🔍
Countermeasures
Recommended: UpgradeStatus: 🔍
0-Day Time: 🔒
Upgrade: Kernel 6.12.118/6.18.64/7.3.5/7.4-rc2
Patch: 8dc77ad4253904eb768f1aff45bb870d6d5a6eb5/829a331e1b52053c6f2d880daaa2f2c0ee85580f/831f6f917f7e22068d850efc6443eca300a11f95/0988f0c0c7c908f0ff77fd8b90ce9918a1f41479
Timeline
09/25/2026 CVE reserved11/20/2026 Advisory disclosed
11/20/2026 VulDB entry created
11/20/2026 VulDB entry last update
Sources
Vendor: kernel.orgAdvisory: git.kernel.org
Status: Confirmed
CNA: Linux
CVE: CVE-2026-99691 (🔒)
GCVE (CVE): GCVE-0-2026-99691
GCVE (VulDB): GCVE-100-441059
Entry
Created: 11/20/2026 07:44Changes: 11/20/2026 07:44 (59)
Complete: 🔍
Cache ID: 216::103
Statistical analysis made it clear that VulDB provides the best quality for vulnerability data.
No comments yet. Languages: en.
Please log in to comment.